DEKO LIGHT 343030 Floor Lamp Instruction Manual
- June 12, 2024
- DEKO LIGHT
Table of Contents
DEKO LIGHT 343030 Floor Lamp
Dear customer,
Thank you for deciding to purchase our product. The product fulfils the
requirements of effective European and national guidelines.
To maintain the condition of the product and to ensure safe operation, you –
as the user – must observe the product notes and the operation manual! They
contain important information for the start-up and handling. It is important,
therefore, that these documents are archived carefully for referring to
information at a later stage.
Safety Instructions
We are not responsible for any property damage or personal injury caused by
failure to observe these product notes and manual, improper handling or
unauthorised modifications. It can only be installed by a qualified
electrician.
Make sure that the item has not been damaged during transport before putting
the light into operation. It may not be operated if there are any damages to
electrical parts.
The luminaire may only be operated completely with its protective cover. It
may only be operated once removed from the packaging. The type plate must not
be removed.
The connection lines in the building must be disconnected before installation
and secured against being switched back on.
Make sure the electrical specifications for the connection lines correspond
with the specifications given on the nameplate of this product.
We recommend that you protect the product with a residual-current-operated
protective device. Follow all installation regulations applicable at your
location.
Make sure that the cables and plugs are not subject to tension or torsional
forces and do not bend the cables. Protect all cables and insulation against
possible damages.
Output lines should be laid separately and spaced apart from other lines. The
power supply cables and the lamp feeders must not cross each other.
Do not allow the product to come into contact with extreme heat or naked
flames.
Use the supplied fastening material only when it is suited for the
installation background.
The product must not be covered with objects (decorations) or thermally
insulating coverings /similar materials.
Before disposal of the packaging material make sure that all components are
removed.
Keep packaging material away from the reach of children and pets. The
packaging contains small parts that may be swallowed by children.
Proper Use
This product is only intended for lighting purposes and may only be operated
on normal or non-flammable surfaces.
Use the product only in protected and dry interior rooms.
Make sure that the surface is suitable for permanently and reliably taking the
weight of the light.
Care
Repairs may only be carried out by a qualified electrician.
If the external flexible cable or cord of this luminaire is damaged, it shall
be replaced by a special cord or cord exclusively available from the
manufacturer or his service agent.
Disconnect the entire product from the mains first and allow it to cool down
before cleaning or maintaining.
Use a dry or slightly moistened cloth for cleaning.
Never use any chemicals, flammable cleaning agents or abrasives. These may
cause damage to the surface coating and/or the insulators.
Faulty Function
- Light switched on at the switch?
- Transformer mounted and connected properly?
- If available; remote control intact? Check the batteries.
- Check the connected lines.
- Lamp defective?
Changing Lamps
The light source of this lamp is not replaceable. When the light source has reached its end of life, replace the entire luminaire.
Storage and
Used electronic devices must be brought back to public collection points and
must not be disposed of as household waste.
Storage in a dry and clean environment. Do not strain the product mechanically
during storage.
Parts
Mounting Instruction
Customer Support
Deko-Light Elektronik-Vertriebs GmbH
www.deko-light.com / deko@deko-
light.com
Technical Data can be changed without advance notice. Errors excepted.
