Moes WP-USD-WH-MS WiFi Smart Dimmer Plug Instruction Manual

Moes WP-USD-WH-MS WiFi Smart Dimmer Plug Instruction Manual

Description

This smart socket would connects to your existing home Wi-Fi network easily to provide wireless control of your lights- with no hub or bridge required. Compatible with Tuya platform .You can control the brightness of lights, adjust the fan, set schedules, or include with other devices in lighting scenes to set the perfect ambiance

Safety Information

Risk of Electric Shock: Electricity can cause personal injury and property damage if handled improperly. If you are not sure about any part of these instructions, please seek professional assistance from a qualified electrician.

Specification

• Product Name : Smart Power Plug
• Working Voltage: AC100V-240V 50/60Hz
• Protocol: Wi-Fi 2.4G+Bluetooth
• Working Temperature : -10~65℃
• Rated Power (Resistive load) : <200W
• Support system : Android / iOS

Preparation for use

1. APP Download Smart Life APP
   
   
   
   

Please scan the QR code or download Smart Life on App store.

2. Register or Login
   

   • Download “Smart Life”Application
   • Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get verification code and “Set password”. Choose “Log in” if you already have a Smart Life account

3. Configure the APP to the switch
   Preparation: Ensure the switch has been connected with electricity; ensure your phone has been connected to Wi-Fi and is able to connect to the Internet.
   Note:
   The switch only supports 2.4G network. If you have connected 5G network, please disconnect 5G network firstly and connect 2.4G network.

Steps for connecting the APP to the device

Method One : Scan the QR code to configure the
network guide.

1. Make sure your Smart Life/Tuya Smart APP has successfully connected to a WiFi

Method Two:

1. Make sure your phone is connected to Wi-Fi and the Bluetooth is enabled.

2. Confirm the device is ready for pairing mode(ON/OFF the power button for 6 times and hold on on the 6th time until the indication light flashes fast for app configuration
   

3. Open Smart Life/Tuya App and Click“+” ,then the prompt page will automatically show on the screen. Click “Add”.
   

4. Enter Wi-Fi Password and click “Next”, waiting for the connection completed.
   
   

5. Add the device successfully, you can edit the name of the device to enter the device page by click “Next”

6. Click“ Done”to enter the device page to enjoy your smart life with home automation.

Equipment operating instructions

1. How to reset/re-pair Wi-Fi code

   • EZ mode : ON/OFF the power button for 6 times and hold on on the 6th time until the indicator light flashes fast for successful pairing/reset；
   • AP mode: ON/OFF the power button for 6 times and hold on on the 6th time under EZ mode until the indicator light flashes slowly to enter AP mode.

2. How to ON/OFF manually
   Manually “short press” the on/off button to turn on/off the device.

3. How to manually dimmer
   Plug the dimmable bulb onto the smart power Plug, and  manually “long press” the on/off button to dimmer for brightness adjust, release your finger when when the light intensity changes to the value you want.

   • When the brightness is with its maximum value under ON state, long press the ON/OFF button to dim the lights to the minimum value slowly, or release your finger to stop the intensity changing.
   • When the brightness is not with its maximum value under ON state, long press the ON/OFF button to lighten the lights to the maximum value slowly

Enter Smart Life Skill in Alexa APP

1. Complete product networking configuration in the App
   Complete the device’s networking configuration according to the prompts in the App. Note: In the App, change the name of the device to an easily identifiable name such as Alexa; names are usually in English, such as “bed light”.

2. Confifigure the Amazon Echo device
   (If you have already confifigured Amazon Echo, you can skip this step. The following instructions are based on the iOS client.)

3. Make sure you Amazon Echo device is powered on and connected to a Wi-Fi network.

4. Open the Alexa APP on your phone and log in.

5. tap on the menu in the upper left corner of the Home page, select “Settings” and tap “Set Up A New Device” to set up the Amazon Echo.

6. Choose your Amazon Echo device type and language for connecting.

7. Press and hold the small dot on the device until the light turns yellow.

8. Click “Continue” to connect to the hotspot, connect to the Amazon Echo hotspot, and return to the APP page.

9. Click “Continue” to find and connect to your home
   Wi-Fi network.

10. Amazon Echo will take a few minutes to try to connect to the network.

11. After the network connection is successful, tap “Continue”. An introduction video will appear，After the video ends, tap “Continue” to jump to the Alexa Home page.

12. You have now completed the Amazon Echo’s confifiguration process.

13. Key step —— Link Skill

14. Tap on “Skills” in the Alexa App menu.

15. Then search for “App Name”. Tap “Enable” to enable the Skill.

16. Enter the App account and password, then tap “Link Now” to link your App account to enable the Skill. Now you can start your smart home journey

17. Common commands
    Control the device via voice commands, now you can control your smart device with Echo. You can control your device (such as your bedroom light) with the following commands:

    • Alexa, turn on/offff bedroom light. (Turn on/offff the light)
    • Alexa, set bedroom light to 50 percent. (Set the light to any brightness)
    • Alexa, brighten/dim bedroom light. (Increase/weaken the brightness of the light)

Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation .This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in   particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator and your body

SERVICE

1. During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product.
2. Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty.
3. Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party.
4. Please keep this warranty card to ensure your rights.
5. Our company may update or change the products without notice. Please refer to the official website for the updates.

RECYCLING INFORMATION

All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority

WARRANTY CARD

Product Information
Product Name
Product Type____
Purchase Date
Warranty Period__
Dealer Information_
Customer’s Name____
Customer Phone___
Customer Address___

Maintenance Records

https://drive.google.com/drive/folders/1MAMhQlX0UgR3BqMjJMPGgJs5wWJVhcqD?usp=sharing

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>