COMICA VDLive10 USB Versatile 2.4G Wireless USB Microphone User Manual

: June 12, 2024
: COMICA

Table of Contents

Foreword
Main Features
Notice
Tips
Packing List
Components and Instruction
Pairing Method
Screen Display Instruction of Receiver (RX)
Installation
Specification
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COMICA VDLive10 USB Versatile 2.4G Wireless USB Microphone

Foreword

Thanks for purchasing Comica VDLive10 USB

Main Features

Dual-channel 2.4G Wireless USB Microphone, Global Free Frequency
Switchable Simplex / Duplex Transmission, Support Two-way Monitoring and Interaction
Wide Compatibility for Phone, Computer, Camera, etc.
Intelligent Noise Reduction, Working Distance Up to 30m (Open Area)
3.5mm Analog and USB Digital Two Output Modes
Support Stereo Mode for all Compatible Devices
Rechargeable Storage Case
IPS Screen for Intuitive Operation and Usage
Mono/Stereo Switch, Volume Adjustment and Mute Functions,etc.
Internal and External MIC Two Input Modes
Low Latency<20ms, Stable Transmission

Notice

Some cameras are not compatible with 3.5mm TRRS-TRRS audio cable, it’s necessary to purchase 3.5mm TRS-TRS audio cable by yourself
Don’t block the antenna position to avoid any poor signal generated when using
Please power the transmitter and receiver off when charging

Tips

VDLive10 USB is universal for USB and 3.5mm interface devices. When used in smartphone, the system will compulsorily choose VDLive10 USB
When used in computer, please follow the steps below:

① Insert VDLive10 USB into the computer
② Click sound setting and set the “Comica_VDLive10” as the input 　　and output device

Packing List

① Transmitter(TX)
② Receiver (RX)
③ Cold Shoe Mount
④ Wind Mu
⑤ USB C-USB A Adapter
⑥ Charging Cable
⑦ 3.5mm TRRS-TRRS Audio Cable
⑧ Charging Case
⑨ Carry Case
⑩ User Manual
⑪ Warranty Card

Components and Instruction

Transmitter(TX):

Built-in Antenna
Working Status Indicator Light (Orange light on: paired; Orange light flashing: unpaired; Red light on: MIC mute)
3.5mm TRS External Mic Port（Simplex Mode） Monitoring Port（Duplex Mode）
S↑/ OFF / D↑↓ Switch Button ( S↑: Simplex mode; OFF: Power o；D↑↓: Duplex mode)
Volume / Mute Adjustment Button (Short press to adjust 4-level volume; long press to mute)
Charging Metal Contact
Reset Hole
Internal Mic

Simplex mode:

The transmitter audio is transmitted to the receiver unidirectionally, audio can only be monitored in receiver

Simplex mode monitoring: audio of transmitter

Duplex mode:

Two way transmission of audio between transmitter and receiver, audio can be monitored in transmitter and receiver

Duplex mode monitoring: audio of transmitter + audio of the platform on the device connected by the receiver

Receiver (RX)

3.5mm Audio Output Port ( 3.5mm analog output mode) Monitoring Port ( USB digital output mode)
Built-in Antenna
USB-C Plug
Charging Metal Contact
Reset Hole
ON/OFF Switch Button (ON: Power on; OFF: Power o )
M/S Switch Button (M: mono mode; S: stereo mode; Short press to switch)

Charging Case

Power Indicator Light (There are four power indicator lights, one of which represents 25% of the power)
Switch Button (Press it to open the charging case)
Pairing Button (Long press to pair)
Transmitter Charging Status Indicator Light (Red light on: charging; Blue light on: fully charged)
Receiver Charging Status Indicator Light (Red light on: charging; Blue light on: fully charged)
Charging Metal Contact
USB-C Charging Port
Reset Hole

Please power the transmitter and receiver o when charging

Pairing Method

① Put the transmitter and receiver into the charging case
② Long press the pairing button to pair

Screen Display Instruction of Receiver (RX)

Group A is left channel and group B is right channel

Installation

Transmitter(TX)

In Simplex Mode
① Switch the S↑/OFF/D↑↓ switch button to S↑ (Simplex mode)
② You can choose to use internal mic or external mic to satisfy your recording demands
When using an external mic, the internal mic is automatically turned off
In Duplex Mode
① Switch the S↑/OFF/D↑↓ switch button to D↑↓ （Duplex mode)
② Install the transmitter on the collar so that the internal mic points to the sound source
③ Insert the headphone into the monitoring port to monitor

Receiver (RX)

USB Digital Output Mode ① USB-C device
Insert the receiver to the USB-C device
You can choose to whether insert the headphone to monitor or not based on your needs

② USB-A device

Connect the receiver and USB-A device via the USB C-USB A adapter
You can choose to whether insert the headphone to monitor or not based on your needs

③ Lightning device

Connect the receiver and Lightning device via the USB C
Lightning adapter(Please purchase USB C-Lightning adapter by yourself)
You can choose to whether insert the headphone to monitor or not based on your needs

2. 3.5mm Analog Output Mode

① 3.5mm TRS camera

Mount the receiver to the camera through the cold shoe mount
Connect the receiver and camera via 3.5mm TRRS-TRRS audio cable or 3.5mm TRS-TRS audio cable (Please purchase 3.5mm TRS-TRS audio cable by yourself)

Some cameras are not compatible with 3.5mm TRRS-TRRS audio cable, it’s necessary to purchase 3.5mm TRS-TRS audio cable by yourself

② USB devices

Work with USB devices via corresponding adapter (Please purchase adapter by yourself)

Specification

Wireless Type	2.4GHz
Antenna	Built-in Antenna
Polar Pattern	Omnidirectional
Frequency Response	80Hz ~ 20kHz
S/N	>60dB
SPL	Internal Mic: 120dB
Dynamic Range	Internal Mic: 86dB
Sound Delay	<20ms
Sensitivity	Internal Mic: -30±2dB
Interface	TX: 3.5mm

RX: USB-C & 3.5mm
Charging Case: USB-C
Battery| TX: 95mAh 3.8V
RX: 90mAh 3.7V
Charging Case: 1000mAh 3.7V
Charging Time| TX: 2 Hours
RX: 2 Hours
Charging Case: 4 Hours
Standby Time| TX: 4 Hours
RX: 4 Hours Charging Case: 3 times for two transmitters and one receiver charged simultaneously
Net Weight| TX :14g
RX : 20g
Charging Case: 167g
Dimension| TX: 20x53x21 mm RX: 33x76x13 mm Charging Case: 96x99x37 mm
Operating Temperature| 0℃ ~ 50℃
Storage Temperature| -20℃ ~ 60℃