PRIMACOL Mystic Decorative Paint Instructions

: June 12, 2024
: PRIMACOL

Table of Contents

Mystic Decorative Paint
SUBSTRATE PREPARATION
APPLICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Instruction
Mystic

Mystic Decorative Paint

NOTE
Always test the product before use on the main surface. The effect obtained depends on many factors, such as substrate preparation, tools used, application technique. The manufacturer is not responsible for improper use of the product. Painting should be carried out at a temperature of 5 – 25°C, avoiding direct sunlight on the painted surface.
It is recommended to decorate the surface with products from one production batch. Otherwise, the contents of all packages must be mixed together in one container.
The product should be stored in a tightly closed original container at 5 – 25 °C and out of the reach of children. Do not expose it to sunlight. Protect from freezing.

Claret	Navy Blue	Bottle Green	Black
20ml	20ml	20ml	40ml
colorant	colorant	colorant	colorant

SUBSTRATE PREPARATION

The substrate should be clean, degreased, even, stable and uncracked.
Fresh cement and lime-cement plasters should be seasoned for at least 4 weeks.
Paint the surface with Decobase paint. It will create a base layer for further work in a color similar to the effect’s colour and ensure the best possible final result.
If necessary, apply 2 coats of Decobase.
Highly absorbent or not equally absorbent surfaces should be primed with a suitable primer before applying Decobase. We recommend our PRIMACOL® DECORATIVE primer.

APPLICATION

Brush application
After opening the Mystic bucket, stir the contents thoroughly.
For colours: Claret, Navy Blue, Bottle Green and Black – pour the appropriate amount of colourant into the Mystic Universe M8 base and mix thoroughly.
Start applying the paint from the top corner of the wall and move diagonally extending the decorated surface.
Apply the product with a flat brush with soft bristles, making criss-cross movements. Work on small areas at a time (product is quick-drying).
After a very short time, return to the previously painted area and gently smooth it with a brush, moving the excess paint to avoid streaks and blur the transitions between painted areas.
Once the whole wall is finished, leave it to dry for at least 3 hours.
After this time, apply the second layer in the same way as the first, but starting from the opposite corner of the wall.
When finished, leave the wall for about 24 hours until completely dry.
Fine shadows may appear in the final result if Mystic paint is applied with a brush.
If you want to be sure you get a completely uniform effect, choose a spray application.
Spray application
Thoroughly protect unpainted surfaces with foil.
After opening the Mystic bucket, stir the contents thoroughly and dilute it to 10% with water. For colours: Claret, Navy Blue, Bottle Green and Black – pour the appropriate amount of colorant into the Mystic Universe M8 base and mix thoroughly before diluting.
Apply the first coat of paint and let the wall dry for at least 3 hours.
After this time, apply a second coat of Mystic and leave the wall for about 24 hours until completely dry.