SleepHub Ground Beaking Sleep Aid for Better Sleep Speaker User Guide
- June 5, 2024
- SleepHub
Table of Contents
SleepHub Ground Beaking Sleep Aid for Better Sleep Speaker User Guide
IMPORTANT SAFETY INSTRUCTIONS
Please read, follow and save these instructions to reduce the risk of damage or injury:
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
A lightning flash in a triangle symbol is to warn the user of uninsulated dangerous voltage, within the product enclosure, that may be of sufficient magnitude to constitute a risk of electric shock
An exclamation in a triangle symbol is to warn the user of important operating and maintenance instruction
A water drop in a barred circle symbol is to warn the user of a potential risk of water damage to the product, and electrical shock
A
flame in a triangle symbol is to warn the user of a potential risk of fire
hazard
- Warning: This product contains magnets which may be harmful to pacemaker wearers
- Do not use your SleepHub™ if any part of the product, including power and audio cables show any sign of damage
- To reduce the risk of an electric shock, do not open any part of your SleepHub™ product, including power adaptor
- Only use the power adapter supplied. Do not use the product, if the adapter or any of the other part of the product appear damaged
- Power socket and power adaptor should be located near the SleepHub and easily accessible at all times
- The product does not have an on/off switch. Switch off at the wall socket and/or remove the plug
- Do not expose the product to moisture or water
- Do not use SleepHub™ in a bathroom, near a bathtub, washbowl, kitchen sink, laundry area, near a swimming pool, or anywhere else where water or moisture are present.
- Do not use your SleepHub™ if any part of the product, including power and audio cables, show any sign of water damage, or are wet
- Do not place any part of the product, including power and audio cables, near any source of ignition or naked flame
- Do not cover Main Console unit during use, as this may lead to overheating and a potential fire hazard
- Do not make any alterations to the product as this may compromise safety, regulatory compliance, system performance and may void the warranty
- Only use your SleepHub™ indoors in a clean and dry environment
- Do not cover or block the Speaker vents during use to ensure premium performance
- This product is not a toy and is not suitable for use in areas where children are playing or frequently present.
Please note :
Visit sleephub.com for more information, a full user
manual, and contact details if you need help or technical support.
What’s in the box
Please identify and inspect the contents of your package. Inside the box you should find the following items:
-
SleepHub™ main unit
-
Two speakers
-
Two RCA cables (1 x 5m and 1 x 2m)
-
Mains power adapter
-
Getting started guide
-
Guarantee leaflet
If any of these items are missing or appear damaged, please contact us at support@sleephub.com
Quick start guide
-
Unpack your SleepHub™ and check all components
-
Place the speakers either side of the user
- Speakers can be placed either side of the bed, facing the bed or behind the bed
- Ensure that each speaker is placed either side of the person who will be using the device as they sleep, so that person is lying in the field of sound for each speaker
Please take care where you locate your SleepHub™. Do not expose the product to trip hazards, liquids or water as this may cause an electrical hazard
-
Connect the speakers to the main unit using the RCA cables
- The 2m cable should be connected to the speaker closest to the main unit
- The 5m cable should be connected the speaker furthest from the main unit
-
Plug the power adapter into a wall socket and connect it to the main unit
Caution!
Risk of product damage: Always make sure that the outlet power supply and voltage corresponds to the voltage printed on the underside of the SleepHubTM
Risk of electric shock: Always pull from the plug, when removing from the socket. Never pull the cable
First Time Use
Connecting to the internet
To ensure that your SleepHub™ is always up to date with the latest software and operating at peak performance, keep it connected to your local WiFi network at all times
- On the home screen (below), tap the settings button to access the settings menu
- Select WiFi and follow the on-screen prompts to select and connect to your local WiFi network
- Your SleepHub™ will check for software updates and install the latest versions, to ensure peak performance
- Proceed to choose your Sleeping Mode…
Choosing your Sleeping Mode
If your SleepHub™ screen is black, just tap anywhere on the screen to access the home screen where you will see “Slide to Sleep”. From your SleepHub™ home screen, swipe to sleep, and tap the Sleeping Mode section of the screen (see below) to access the Sleeping Mode selection menu.
- Deep Sleep: An eight-hour programme including an 18 minute wake-up cycle and alarm. Ideal if you have a regular schedule which allows an undisturbed eight hour rest period
- Easy Sleep: A customised programme for when you have a set amount of time to get the sleep you need. The Deep Sleep programme is automatically adjusted to deliver the optimum sleep pattern depending on how long you have between going to bed and waking up
- Fall Asleep: A two-hour programme guides you into a deep sleep with optional wake-up alarm. Ideal if you struggle to fall asleep but remain asleep, once you do
- Power Nap: A choice of 30, 45 and 60 minute programmes, including an optional wake-up alarm. Ideal if you need an energising nap
Selecting your soundscape
Your SleepHub™ plays a selection of soundscapes to help create the right
environment for your ideal sleep experience.
From the sleep screen, tap the soundscape icon to access the soundscape menu.
Choose your preferred soundscape and tap OK to proceed, or tap the back arrow
to return to the Sleep screen. When you have selected your soundscape, alarm
time and alarm sound, press play to begin.
Balancing your sleep sound and soundscapes
SleepHub™ helps you to achieve quality sleep through scientifically formulated sounds that use rhythms and pulses to simulate the waves your brain should produce through each sleep cycle. We call this the sleep sound. The sleep sound should be set at a low volume so you can hear it faintly. You may choose to sleep with this sound only without playing a soundscape. Where you choose to play a soundscape, it should be set at a volume which is slightly lower than the sleep sound – you should still be able to hear the sleep sound above the soundscape.
To set the volume levels that best suit you:
- Tap the settings button on the home screen to access the settings menu
- Tap Volume Control on the settings screen
- Adjust the individual volume levels by moving the sliders up or down
Please note that you may need to try different levels during your initial sleep periods to find your optimal balance
Selecting your Alarm time
From the sleep screen, tap the Alarm icon to access the alarm time menu. Scroll up or down to select the hour and minute you want the alarm to begin, then tap OK to confirm. If you decide not to set the alarm, tap Cancel to return to the sleep screen.
Selecting your Alarm Sound
If you choose to set an alarm, you can select from a variety of alarm sounds to play at the end of your chosen sleep cycle. Choose your preferred alarm sound, and tap OK to proceed, or Cancel to return to the Sleep screen.
Switching off your alarm
- Tap the screen to snooze the alarm. The snooze function continues every 5 minutes until stopped
- Slide the screen to stop the alarm
Connecting to Bluetooth audio device
- Using your Bluetooth enabled audio device, find and connect to SleepHub™. Please refer to your audio device’s instructions on how to do this, if required
- You may now use the premium audio technology in your SleepHub™ to play your favourite music and sounds, while not in an active sleep mode cycle.
Additional settings
From the sleep screen, tap the Soundscapes icon to access the Soundscapes menu. Follow the on-screen prompts to tailor your SleepHub™’s settings to meet your individual requirements, including the sound levels, balance and brightness. For the latest information and advice on how to customise your SleepHub™, please visit sleephub.com
Register your SleepHub™
Register your SleepHub™ within 14 days of purchase at sleephub60.com to activate your 60-day sleep guarantee. To do this, you will need your serial number which you will find in the About section of your Settings menu.
Please note that every sleep experience is different; you may experience an improved sleep within only a few nights of using SleepHub™. You may even feel that improvement without adjusting your SleepHubTM’s audio settings.
For more guidance on how to get the very best experience for your individual needs, please visit sleephub.com for a detailed user guide, and the latest tips and information.
Technical information
Technical specification of the product, including power supply, audio cables and operating software are subject to change, without notice.
Product Specification:
- Power supply: AC – DC power supply. Input 100 -240VAC ~1.5A.
- Output 19V DC 3420mA
- Cable length: 2.0 m and 5 m RCA to RCA braided
- Console dimensions: Body Height:120.6mm, Length:187.6mm,
- Width:133.2mm
- Speaker dimensions: Body Height:127.7mm, Length:155.1mm,
- Width:136.3mm
Notice for USA & Canada:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
“FCC RF Radiation Exposure Statement
Caution: To maintain compliance with the FCC’s RF exposure guidelines,
place the unit at least 20cm from nearby persons.”
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Only use the power adaptor provided for the main unit:
Input: 100-240V AC 50/60Hz 1.5A,
Output: 19VDC 3.42A
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
Hereby, Cambridge Sleep Sciences, declares that this SleepHubTM is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The declaration of conformity may be consulted at www.sleephub.com/DOC.pdf.
SleepHub. Model Number: SH1
SH1-IFU01-A
SleepHub™ is a trademark of Cambridge Sleep Sciences Limited
Copyright 2020 Cambridge Sleep Sciences Limited. All rights reserved
Cambridge Sleep Sciences Limited is registered in England (No. 12401790)
Registered Office is: 115B Innovation Drive, Milton Park, Abingdon,
Oxfordshire, OX14 4RZ
References
- SleepHub® ground-breaking sleep aid for better sleep
- SleepHub® ground-breaking sleep aid for better sleep