PRIMACOL PROFESSIONAL Silver Sand Instructions

: June 12, 2024
: PRIMACOL PROFESSIONAL

Table of Contents

Silver Sand
SUBSTRATE PREPARATION
APPLICATION
Documents / Resources

Instruction
Silver Sand

Silver Sand

PRIMACOL PROFESSIONAL Silver Sand - Sand

NOTE
Always test the product before use on the main surface. The effect obtained depends on many factors, such as substrate preparation, tools used, application technique. The manufacturer is not responsible for improper use of the product.
Painting should be carried out at a temperature of 5 – 25°C, avoiding direct sunlight on the painted surface.
It is recommended to decorate the surface with products from one production batch. Otherwise, the contents of all packages must be mixed together in one container.
The product should be stored in a tightly closed original container at 5 – 25 °C and out of the reach of children. Do not expose it to sunlight. Protect from freezing.

SUBSTRATE PREPARATION

The substrate should be clean, degreased, even, stable and uncracked.
Fresh cement and lime-cement plasters should be seasoned for at least 4 weeks.
Paint the surface with Decobase paint. It will create a base layer for further work in a colour similar to the effect’s colour and ensure the best possible final result. If necessary, apply 2 coats of Decobase. Leave the wall to dry completely.
Highly absorbent or not equally absorbent surfaces should be primed with a suitable primer before applying Decobase. We recommend our PRIMACOL® DECORATIVE primer.

APPLICATION

After opening the Silver Sand bucket, stir the contents thoroughly.
For colours: Umbra 2, Umbra 40, Turquise 2, Turquise 40, Claret 2, Claret 40, Navy Blue 2, Navy Blue 40, Bottle Green 2, Bottle Green 40, Black 2, Black 40 – pour the appropriate amount of colorant into the Silver Sand S0 base and mix thoroughly.
Mixing should be repeated during the application, from time to time.
Apply the paint with a flat brush.
Work on small areas at a time (approx. 1 m²) using the “wet-on-wet” method.
Depending on the desired effect, painting can be done vertically, horizontally, crosswise or in an irregular way. The most popular method of application is to make irregular, energetic brush strokes, spreading the paint in different directions.
The method of painting determines the decorative effect obtained.
Once the whole wall is finished, leave it for about 24 hours until completely dry.

Umbra 2 2ml colorant	Turquise 2 2ml colorant
Claret 2 2ml colorant	Navy Blue 2 2ml colorant
Bottle Green 2 2ml colorant	Black 2 2ml colorant
Umbra 40 40ml colorant	Turquise 40 40ml colorant
Claret 40 40ml colorant	Navy Blue 40 40ml colorant
Bottle Green 40 40ml colorant	Black 40 40ml colorant