bluebuilt BBRVMSW01 Radiator Fan Mono Set and Extension Set User Manual

bluebuilt BBRVMSW01 Radiator Fan Mono Set and Extension Set

Product Information

Product Name:
Radiator Fan Mono Set and Extension Set
Version: V1.0
Model Numbers: BBRVMSW01, BBRVESW01

• This manual wasoriginally written in Dutch, and all other languages are translated documents. In case of translation errors, the Dutch version takes precedence. – Contact details for BlueBuilt, a registered brand of Coolblue B.V., can be found at the end of the manual.

Safety Instructions

• The manual and safety instructions must be read carefully before using the appliance with the appropriate parts.
• Failure to comply with all instructions may cause material damage and/or serious injury.

Product Usage Instructions

Setting up the Appliance:

• Remove and check the packaging.
• Unpack the appliance.
• Install the appliance.
• Install the temperature sensor.
• Connect the thermostat cable.
• Connect multiple fans if required.

Use

• Set the thermostat according to your desired temperature.

SETTING THE THERMOSTAT
The display shows the temperature detected by the temperature sensor. If the temperature sensor is not connected or is damaged, the display shows 00. The default setting of the fan is that the fan switches on at a radiator temperature of 30°C and switches off at a temperature below 29°C. To change these settings, follow the steps below:

SETTING THE ACTIVATION TEMPERATURE
Press and hold the left button (ON/+°C) for three seconds. The temperature on the display screen flashes. A higher activation temperature can be selected using the left button (ON/+°C). A lower temperature can be set using the right button (OFF/-°C). If the buttons are not operated for three seconds, the setting is saved and the current radiator temperature is shown on the display.

SETTING THE DEACTIVATION TEMPERATURE
Press and hold the right button (OFF/-°C) for three seconds. The temperature on the display screen flashes. A higher deactivation temperature can be selected with the left button (ON/+°C). A lower temperature can be set using the right button (OFF/-°C). If the buttons are not operated for three seconds, the setting is saved and the current radiator temperature is shown on the display.

Cleaning and Maintenance

• Important information regarding cleaning and maintenance is provided.
• Clean the housing as instructed.

IMPORTANT INFORMATION

• Carry out cleaning and maintenance as indicated. This extends the life of the appliance and will keep it working properly.
• RISK OF ELECTRIC SHOCK! Remove the mains plug from the socket. Ensure that the plug is not accidentally plugged into the socket during the activities.
• RISK OF BURNS! Wait until all hot parts of the appliance have cooled down before starting cleaning and maintenance.
• WARNING: Never spray the appliance and make sure no water gets into it. Never use aggressive cleaning agents, white spirit, detergents, impregnated wipes or other cleaning solutions. These may damage the housing and appliance.
• Cleaning and user maintenance must not be carried out by children without supervision.

CLEANING THE HOUSING
To clean the housing:

1. Remove the mains plug from the socket.
2. Use a soft damp cloth to wipe the housing.
3. Then wipe the appliance dry with a soft cloth.

Malfunctions and Solutions

• Troubleshooting guide for common malfunctions is provided.

You can solve some problems easily yourself using the table below. If the following descriptions do not solve your problem, please contact our customer service: www.coolblue.nl/klantenservice. Only a qualified electrician or authorized person may solve the faults not contained in this manual. Repairs carried out by unauthorised persons may cause injury and/or serious damage to persons and property.

cable connector is firmly inserted into the radiator fan port. If necessary, try another port on the fan. If the radiator becomes hot, and the fault code ‘00’ remains visible, then the sensor or cable is defective. In this case, please contact customer service.
The radiator fan is on, but there does not appear to be any difference in the heat output.| The radiator fan is positioned the wrong way round.| Check that the radiator fan is blowing the right way, using section 3, and turn the fan around.
The radiator fan does not fit between the
radiator panels.| It is a narrow radiator, with a distance between the radiator panels less than 7 cm.| Follow the steps for installing the radiator fan on a narrow radiator, see section 3.3.3. If the fan still does not fit, at- tach the feet to the radiator fan as described in section 3.3.4 and place the product on the floor under the radiator.
The radiator fan does not fit under the radiator.| There is not enough room.| Place the radiator fan on the radiator. Make sure the radiator fan is facing upwards so that the air flow is facing upwards.
---|---|---
The radiator fan does not fit between the wall and a single pan- el radiator.| There is not enough room.| Attach the feet to the radiator fan as described in section 3.3.4 and place the product on the floor under the radiator.
I have a different type of radiator from that men- tioned in section 3.3.| The manual does not give instructions on installation for other-shaped ra- diators.| Attach the feet to the radiator fan as described in section 3.3.4 and place the product on the floor under the radiator. If there is no room under the radiator, place the fan on the radiator. Make sure the radiator fan is facing upwards so that the air flow is facing upwards.

from the fan motors can be heard. Make sure the radiator fan housing is not in direct contact with the radiator, if necessary move the fan magnets until the contact noise has disappeared.

Taking Out of Service:

• Instructions for taking the appliance out of service are provided.

WARNING!
Do not place heavy objects on the appliance. This may cause deformations and damage to the appliance.
If the appliance is stored for a longer period, the following measures must be taken:

1. Remove the mains plug from the socket.
2. Clean the appliance in accordance with the instructions in Cleaning and maintenance.
3. If possible, pack the appliance in its original packaging or in a plastic bag and put it in a dry place.

Waste Disposal:

• Instructions for disposing of the appliance and packaging material as waste are provided.

DISPOSE OF THE APPLIANCE AS WASTE

• This symbol on the product indicates that this product must not be treated as normal household waste, but should be collected separately. Return the product to a collection point for recycling waste electrical and electronic equipment if you live within the EU or in other European countries that have separate collection systems for waste electrical and electronic equipment. By properly disposing of the product as waste, you help to avoid potential environmental and public health risks that could otherwise arise from mishandling discarded equipment. Recycling materials contributes to the conservation of our natural resources.

DISPOSE OF THE PACKAGING MATERIAL AS  WASTE
Dispose of the packaging material through your local recycling facility. By properly disposing of packaging material and packaging waste, you help prevent potential risks to the environment and public health. The symbol on the packaging indicates that the packaging is made of cardboard.

Note:

• The latest version of the manual can be found online at www.coolblue.nl by searching for the article number. For any further assistance or customer service, please contact BlueBuilt through their website: https://www.coolblue.nl/klantenservice

FOREWORD
ABOUT THIS DOCUMENT

• This manual contains all information for the correct, efficient and safe use of the appliance.
• This manual is intended for the end user and/or buyer of this appliance.
• Installation of the appliance, use and all cleaning and maintenance activities as described in the instructions may be carried out by the end user, unless clearly indicated to the contrary.
• Make sure you have read and understood the instructions in this manual completely before installing or using the appliance. This prevents fire, explosions, electric shocks and/or other hazards that may result in physical injury and/or material damage.
• Please retain this document for future use as long as you use and/or own the appliance and pass it on to subsequent users of the appliance.
• Coolblue B.V. cannot in any way be held liable for material or immaterial damage to you or to others, the appliance, your other belongings or belongings of others caused by not following the instructions in this manual.
• The warnings and safety instructions in this manual do not cover all possible circumstances and situations.
• In this manual the BlueBuilt radiator fan will also be referred to as ‘appliance’.
• If you contact our customer service, make sure you have the model number ready. The information can be found on the type plate or on the front of this manual.

ORIGINAL INSTRUCTIONS
This manual was originally written in Dutch. All other languages are translated documents. In the case of translation errors, the Dutch version takes precedence.

SYMBOLS USED

COPYRIGHT
The data depicted in this manual, including texts, photographs, graphic drawings, trademarks, (trade) names and logos, are the property of Coolblue B.V. and are protected by copyright, trademark law and/or any other intellectual property right, unless these data belong to a third party. You are never allowed to reproduce, transfer, distribute, store or make the contents of the manual available to third parties, in whole or in part, without the prior written consent of Coolblue B.V. and/or the third party to whom the data belong.

NOTE!
You can also find the latest version of this manual online, at www.coolblue.nl if you search for the article number.

BLUEBUILT CONTACT DETAILS
BlueBuilt is a registered brand of Coolblue B.V. Customer service can be reached at: https://www.coolblue.nl/klantenservice

Coolblue B.V.
Weena 664
3012 CN Rotterdam
Netherlands

SAFETY

WARNING
Read this manual and safety instructions carefully and make sure you understand the contents before using the appliance with the appropriate parts. Failure to comply with all instructions may cause material damage and/or serious injury.

SAFETY WARNINGS AND REGULATIONS

• This appliance may be used by children from eight years of age and above and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been trained in the safe use of the appliance and that they understand the associated dangers.
• This appliance should not be used by children under the age of eight.
• This appliance and its components are not toys, so children should not play with the appliance or its components.
• Children, legally incompetent persons and domestic animals must be supervised while using the appliance. Children must be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance must not be carried out by children without supervision.
• RISK OF SUFFOCATION! Keep packaging away from children.
• This appliance is intended for domestic use and similar applications such as
• staff kitchens in shops, offices and other work environments;
• farms and guests in hotels, motels, B&B and other residential environments;
• catering and similar non-retail applications.
• This appliance is for indoor use only. This appliance should not be used outdoors.
• The appliance must be stored in a room free of naked flames, gas-powered appliances or electric heaters.
• The appliance must be stored in such a way so as to prevent mechanical failure.
• Store the appliance out of reach of unauthorised persons and do not allow anyone unfamiliar with the appliance and these instructions to use it.

SAFETY INSTRUCTIONS: INSTALLATION

• DANGER!
  • Risk of fire / flammable materials.
• Install the appliance in accordance with the installation instructions. Incorrect installation may cause electric shocks, fire and/or property damage.
• Use only the accessories provided for the installation.
• Ensure that the plug and socket are clearly visible and accessible at all times.

SAFETY OF PERSONS

• Always be alert and act with caution. Do not use electrical appliances if you suffer from impaired concentration or lack of awareness, or if you are under the influence of drugs, alcohol or medications. Even the slightest distraction can lead to serious accidents and injuries when using electrical appliances.
• Always operate and use the appliance as described in these instructions for use. Assume that what is not specified here is also not possible.

SAFETY IN USE

• Follow the maintenance instructions for trouble-free use and long service life.
• Do not use the appliance in the vicinity (at least one metre away) of highly flammable or explosive substances or fuels.
• Never expose the appliance to a naked flame.
• Do not expose the appliance to direct sunlight to avoid discolouration of the housing.
• Do not use paint, cleaning sprays, anti-insect sprays, etc. on or near the appliance. This may cause deformation of the housing or electrical damage.
• Do not expose the appliance to rain or use it in damp or wet environments, such as the bathroom and laundry room, nor near a bath, shower or swimming pool.
• Do not use the appliance close to a fire source, close to splashing oil, direct sunlight or splashing water.
• Do not spill or pour any water, oil or liquid onto or into the appliance.
• Always move and/or relocate the appliance calmly.
• Do not operate the appliance if you notice damage to the appliance, the power cable or the plug, or if does not work properly, has fallen or otherwise malfunctions. Contact customer service for further information (See Foreword for contact details).
• Unplug the appliance if you hear strange noises, smell an odour or see smoke.
• Do not insert fingers or objects such as pens through the grilles in the device and especially warn children of these dangers.
• RISK OF FIRE! Do not place objects on the appliance and never cover the appliance. Never block the grilles for incoming and outgoing air, not even partially. This can cause fire!
• Do not stand on the appliance.
• If the appliance is not in use, or when cleaning it, carrying out maintenance or moving it, first switch it off and then remove the plug from the socket.

SAFETY INSTRUCTIONS: ELECTRICAL SAFETY

• DANGER!
  • Risk of fire / flammable materials.

If there are any questions regarding the instructions for electrical safety, please contact customer service (see Foreword for contact details).

• Before use, check that the voltage on the socket you want to use matches that on the type plate of the appliance (100-240 V; 50/60 Hz). Damage caused by faulty voltage is not covered by the guarantee.
• RISK OF ELECTRIC SHOCK! Only use the appliance’s factory-fitted plug and never change it. The plug must match the type of socket used to reduce the risk of electric shocks.
• RISK OF ELECTRIC SHOCK! Do not remove the earth contacts from the plug.
• RISK OF ELECTRIC SHOCK! Never pull the power cable to carry or move the appliance or to disconnect the plug. Keep the power cable away from heat, oil, sharp edges or corners and moving parts. Do not make any changes to the power cable or submerge it in water or other liquids. Do not turn or kink the power cable, do not roll up the power cable too tightly after use and do not wind it up around the appliance; this may damage the insulation layer! Damaged or tangled power cables increase the risk of electric shocks.
• RISK OF ELECTRIC SHOCK! Do not touch the appliance, plug or mains cable with wet or damp hands.
• Fully unroll the appliance’s power cable before plugging it into the socket. This is to prevent heat generation in the cable.
• Do not pass the power cable under a carpet or cover it with mats, runners and the like. This can lead to unforeseen heat generation.
• Regularly check the appliance for damage to the power cable and plug. If there is visible damage, a strong smell, or parts become excessively hot, stop using it immediately and remove the plug from the socket.
• It is not permitted to open, change or repair the appliance yourself. Do not drill holes into the appliance anywhere to avoid dangerous situations. The appliance, plug and/or cable must be repaired and/or replaced by an electrician or an equivalent qualified person. Repairs by amateurs invalidate the guarantee and can cause dangerous situations!

EXPLANATION OF GRAPHIC SYMBOLS ON THE PRODUCT AND PACKAGING

PRODUCT FEATURES

DESCRIPTION OF THE APPLIANCE
With the BlueBuilt radiator fans, the heat from radiators or convector heaters is distributed evenly and efficiently throughout the space. With the help of the radiator fans, a room is heated on average twice as fast as without a fan. The radiators provide energy saving because the heating installation is switched on less often. Radiator fans can easily be mounted on different radiators by means of the magnetic attachment. Depending on the temperature of the radiator, the fan is automatically switched on and off by the temperature sensor. This manual describes the operation of the BlueBuilt Mono Set, and the Extension Set. Multiple Extension Sets can be connected to the Mono Set. The power adapter in the pack can power up to 10 fans.

SPECIFICATIONS

| Radiator ventilator, Mono set & Extension set| Adapter
---|---|---
Model / Type| BBRVMSW01 & BBRVESW01|
Weight| 445g (mono set) / 347,5g (extension set)|
Size (H × B × D)| 300 mm x 69 mm x 30 mm|
Electrical protection| Class III| Class II
Nominal voltage, frequency and current| 5V⎓0.2A| 100-240V~, 50/60Hz, 0.35A
Input power| 1W| 100-240V~, 50/60Hz, 0.35A
Energy consumption in standby mode (PSB)| 0W| 0.05W
---|---|---
Maximum noise level| 39.1 dB(A)| 0 dB(A)
Maximum fan flow rate| 1.59 m³/min|
Tropical climate yes/ no| No| No
Suitable for room temperature >40°c| <=40°c| **** <=40°c

GUARANTEE
This appliance comes with a guarantee period of five years after purchase. For more information on guarantee conditions, please visit www.coolblue.nl/klantenservice. In any case, you must have the purchase order with purchase and/or delivery date in order to be able to claim the guarantee.

INSTALLATION

Before installing the appliance, carefully review the safety information (section 1).

REMOVE AND CHECK THE PACKAGING

• WARNING!
  Suffocation hazard due to oxygen deficiency: never let children play with the packaging material. Keep the packaging material out of reach of children.

Remove the packaging and packaging material from the appliance. Keep the packaging to store the appliance when not in use. Check that the appliance is not damaged. Do not connect the appliance if it is damaged. Report any damage immediately to customer service. In that case, keep the packaging. Check the contents of the packaging using figure A. If any parts are missing or damaged, please contact www.coolblue.nl/klantenservice.

UNPACKING THE APPLIANCE

• RISK OF SUFFOCATION!
  Keep packaging materials out of reach of children. Packaging materials are not toys.

To turn the appliance on:

1. Remove all packaging material and any transport attachments present (e.g. tape, tie-wraps, cable ties and protective film).
2. Check that all parts are present and that there is no damage to the appliance or accessories.

WARNING!
Do not use a damaged appliance but contact customer service. See Foreword for the contact details.

| Radiatorventilator, Mono set| Radiator ventilator, Extension Set
---|---|---
A. Radiator fan| |
B. Extension cable usb-C to usb-C 50 cm| |
C. Power adapter type F to usb-C| |
D. Thermostat with connecting cable usb-A to usb-C 170 cm| |
E. Temperature sensor| |

NOTE!
The power adapter in the pack can power up to 10 fans.

INSTALLING THE APPLIANCE

The BlueBuilt radiator fan is suitable for a number of different radiators. Using the images below, check which type of radiator the fan should be installed on, and read through the corresponding section for proper installation:

1. Wide, double panel radiators, with a distance of 7 cm or more between the panels (type 20, 21, 22, 33)
2. Narrow, double panel radiators, with a distance of 7 cm or less between the panels (type 20, 21)
3. Single panel radiators (types 10 and 11)
4. Convector heating with wall mount, or placed in a convector pit. Other types of heating.

INSTALLATION ON A WIDE DOUBLE PANEL RADIATOR

1. Make sure the fan is facing up (with the logo facing up).
2. Check that the fan magnets are fitted as shown in the figure below: fitted alternately.
3. Place the fan at the bottom of the radiator between the radiator panels, where there are no radiator brackets or clamps. The fan magnets will automatically attach to the radiator. The installation of multiple fans follows in the same way.
4. To connect the thermostat cable, the sensor and/or connect several fans, go to sections 3.4, 3.5, 3.6.

INSTALLATION ON A NARROW DOUBLE PANEL RADIATOR
This instruction is for installing fans on narrow, double panel radiators with panels from 5.5 cm to 7 cm.

1. Make sure the fan is facing up (with the logo facing up).
2. Remove the magnets from the fan, invert them 180 degrees and put them back into the fan as shown in the figure below.
3. Place the fan at the bottom of the radiator between the radiator panels, where there are no radiator brackets or clamps. The fan magnets will automatically attach to the radiator. The installation of multiple fans follows in the same way.
4. To connect the power cable, the sensor and/or connect several fans, go to sections 3.4, 3.5, 3.6.

INSTALLATION ON A SINGLE PANEL RADIATOR

1. Make sure the fan is facing up (with the logo facing up).
2. Check that the magnets of the fan are fitted as shown in the figure below: all magnets must be fitted on one side of the fan.
3. Place the fan at the bottom of the radiator on the radiator panel, between the wall and the radiator, where there are no radiator brackets or clamps. The fan magnets will automatically attach to the radiator. The installation of multiple fans follows in the same way.
4. To connect the thermostat cable, the sensor and/or connect several fans, go to sections 3.4, 3.5, 3.6.

INSTALLATION UNDER A CONVECTOR / OTHER HEATING TYPES

1. Remove the magnets from the fan and place them in the slots at the bottom of the fan according to the figure below.
2. Place the fan under the convector. The installation of multiple fans follows in the same way.
3. To connect the thermostat cable, the sensor and/or connect several fans, go to sections 3.4, 3.5, 3.6.

INSTALLING THE TEMPERATURE SENSOR
Place the magnetic temperature sensor at the radiator, near the hot water supply (where the radiator first heats up). Insert the sensor connector into one of the four fan ports.

NOTE!
The installation of one sensor is sufficient for connecting multiple fans. In this case, make sure you connect the sensor to a radiator that heats up first.

CONNECTING THE THERMOSTAT CABLE

1. Connect the thermostat cable to the fan; insert the connector into an empty fan port.

2. Connect the thermostat cable USB-A connector to the power adapter, then plug the adapter into the socket. NOTE!
   If multiple fans need to be connected, connect them first (see section 3.6) before plugging the adapter into the socket. Make sure the thermostat cable and temperature sensor cable are connected to the type C ports on the same side of the ventilator.

3. Turn on the central heating. Wait for the radiator fan to automatically switch on. This occurs when the radiator temperature exceeds 30°c. The thermostat switches off automatically when the radiator cools down below 29°c. The thermostat shows the radiator temperature detected by the sensor.

CONNECTING MULTIPLE FANS
Multiple fans can be easily connected using the extension cable. Insert the extension cable connector into an empty fan port connected to the thermostat cable and sensor cable. Insert the other extension cable connector into an empty port of a second fan. Install the second fan on the radiator according to the instructions described in sections 3.3.1 – 3.3.4.

BlueBuilt is a registered trademark of Coolbue B.V., Weena 664, 3012 CN Rotterdam, The Netherlands.

References

• Service client | Coolblue - Tout pour un sourire
• Kundendienst | Coolblue - Alles für ein Lächeln
• Coolblue - alles voor een glimlach
• Service client | Coolblue - Tout pour un sourire
• Coolblue - alles voor een glimlach
• Coolblue - alles voor een glimlach
• Klantenservice | Coolblue - Alles voor een glimlach
• Klantenservice - Coolblue - alles voor een glimlach

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>