On2Pets Interchangeable Leaf Branches Curved Canopies Instruction Manual
- June 4, 2024
- On2Pets
Table of Contents
On2Pets Interchangeable Leaf Branches Curved Canopies
PARTS
Disclaimer: Some items may not be drawn to scale
STEP 1
- Turn Canopies (C1, C2) over and insert L Brackets (B4) into the guided slots until flush.
- Screw (B1) into the narrow part of the L Bracket (B4) into Small Canopy (C1) and Large Canopy (C2).
- Screw (B2) into the wider part of the L Bracket (B4) into Small Canopy (C1) and Large Canopy (C2).
STEP 2
- Insert each Cap (D1) into the slots from underneath Canopies with open end facing up.
- Push Branch (E1) into Cap (D1). Press down firmly to secure branch.
- Repeat step 2.2 until both Canopies are complete.
STEP 3
-
Locate the studs on the wall where you want to place your Canopies. Use a level on the flat portion of the shelf to align it straight.
NOTE: L Brackets (B4) are 16” apart to ensure correct installation into the wall studs. If screws are not aligned into the wall studs it might not support
the weight of your cat.
-
After you locate the studs, insert Screws (B3) into L Brackets (B4) and screw Small Canopy (C1) and Large Canopy (C2).
Change Branch colors easily and customize to your liking.
NOTE: Additional leaf sets are sold separately and come with their own
cap system.
BEFORE YOU BEGIN INSTALLATION, PLEASE READ THE FOLLOWING:
- Assemble at your own risk. On2Pets shall not be held liable for injury or damages to wall due to incorrect installation.
- Installation may require two people.
- Holes are 16” apart. Installation should only be into the wall studs. We do not recommend using plastic anchors.
- This product supports cats up to 32 lbs.
Love your cat furniture? Share a review on On2Pets.com.
PLEASE BE REMINDED: Product not intended for the use of children. Be aware some components may be swallowed. If such event occurs, stop use of the product immediately and check our return and warranty policies.