On2Pets CT103 2 Ft. Interchangeable Leaf Branches Cat Tree Instruction Manual
- June 4, 2024
- On2Pets
Table of Contents
On2Pets CT103 2 Ft. Interchangeable Leaf Branches Cat Tree
PARTS
Disclaimer: Some items may not be drawn to scale
STEP 1
-
Insert Leveling Glides (A2) into Base (B1). Adjust to ensure Base (B1) is stable and level.
Screw Large Rod (A1) into Base (B1) until tight. -
Place Base Trunk (B2) on top of Base (B1). Make sure the small wood gasket fits inside trunk.
-
Place Perch (C2) over Base Trunk (B2). Rotate Perch (C2) clockwise until tight.
STEP 2
-
Insert each Cap (D1) into the slots from underneath Perch (C2) with open end facing up.
-
Push Branch (E1) into Cap (D1). Press down firmly to secure branch.
-
Change branch colors easily and customize to your liking.
NOTE: Additional leaf sets are sold separately and come with their own cap system.
Love your cat furniture? Share a review on On2Pets.com.
PLEASE BE REMINDED: Product not intended for the use of children. Be
aware some components may be swallowed. If such event occurs, stop use of the
product immediately and check our return and warranty policies.
This product is protected by the following USPTO codes: D668,006 / D700,754 /
8,695,533B1 / D688,002
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>