On2Pets B01G9641QC 4 Ft. Interchangeable Leaf Branches Cat Tree Instruction Manual
- June 4, 2024
- On2Pets
Table of Contents
4 FT. INTERCHANGEABLE
LEAF BRANCHES CAT TREE
For inquiries or assistance, please contact us at Support@On2Pets.com.
MADE IN THE USA
@On2Pets
PARTS
Disclaimer: Some items may not be drawn to scale
STEP 1
1.1
Insert Leveling Glides (A3) into Base (B1). Adjust to ensure Base (B1) is
stable and level. Screw Large Rod (A1) into Base (B1) until tight.| 1.2
Place Base Trunk (B2) on top of Base (B1). Make sure the small wood gasket
fits inside trunk.| 1.3
Place Medium Perch (C2) over Base Trunk (B2). Rotate Medium Perch (C2)
clockwise until tight.
STEP 2
2.1
Screw Connector (A4) halfway into the remaining part of Large Rod (A1).|
2.2
Screw Small Rod (A2) onto the remaining half of Connector (A4) until tight.
NOTE: Hold Connector (A4) steady while rotating Rod (A2)| 2.3
Place Middle Trunk (B3) on top of Medium Perch (C2). Make sure the small wood
gasket fits inside trunk.
STEP 3
3.1
Place Small Perch (C3) over Middle Trunk (B3). Rotate Small Perch (C3)
clockwise until tight.| 3.2
Rearrange perches so your cat is able to climb easily.
NOTE: If Small Rod (A2) does not reach the Top Small Perch (C3), unscrew Small Rod (A2) until it screws into Small Perch (C3).
STEP 4
4.1
Insert each Cap (D1) into the slots from underneath Medium and Small Perch
(C2, C3) with open end facing up.| 4.2
Push Branch (E1) into Cap (D1). Press down firmly to secure branch.| Change
branch colors easily and customize to your liking.
NOTE: Additional leaf sets are sold separately and come with their own
cap system.
Love your cat furniture? Share a review on On2Pets.com.
PLEASE BE REMINDED : Product not intended for the use of children. Be
aware some components may be swallowed. If such an event occurs, stop the use
of the product immediately and check our return and warranty policies. This
product is protected by the following USPTO codes: D668,006 / D700,754 /
8,695,533B1 / D688,002