atomi smart AT2020 Smart WiFi Outdoor Floor Lamp User Guide
- June 12, 2024
- Atomi Smart
Table of Contents
**atomi smart AT2020 Smart WiFi Outdoor Floor Lamp
**
Connection Guide
-
Scan the OR code below
or go to https://atomismart.oom/opp/
Get the app
Download the Atomi Smart app from the App Store or Google Play. -
Register
Follow the on-screen instructions and register an account.
Make sure to allow access to Location (Android) Bluetooth® end Local Network (iOS). -
Turn on your Atomi Smart device
And confirm that the light is flashing white.
It not flashing. press and hold the power button tor 10s to reset. -
Add your Atomi Smart device
Press “Add Device” or the “+” sign and select “Connect Device” on the pop-up that appears. -
Select the right network
Enter your home WiFi name and password, then press “Continue·.
Make sure you’re connected to a 2.4GHz WiFi Network
(Atomi Smart can’t connect to 5GHz Networks).
SmartWiFi
Outdoor Floor Lamp
Troubleshooting
The pop-up does not appear when adding a device.
Make sure that you are allowing t he app to access your phone’s Location
(Android), Bluetooth~ and Local Network (iOS). For more details, visit our
website’s Support page.
If the pop-up still doesn’t appear, follow the steps below
- Press “Add Device” or t he “+” sign and select your Atomi Smart device.
- Follow the on-screen instruct ions (Make sure you connect to a 2.4GHz WiFi Network).
I can’t find the atomi- smart-XXXX network in my WiFi list.
Make sure your Atomi Smart device is powered on and the light is f lashing
white. If not, reset your device.
My WiFi network doesn’t appear in the Atomi Smartapp.
Use your smo rtpho11e to con firm t11at you have al least two WiFi bars in the
vicinity of your Atomi Smart device. If not. move your Atomi Smort device c
loser to your router. (The list will refresh every 10 seconds).
Cannot connect to myWiFi network.
Make sure that you have entered the correct WiFi password during the WiFi
setup. Check if there are problems with your internet connection. If the WiFi
signal is too weak, reset your WiFi router 011d try again.
I’m getting “Failed to Add Device”, “Failed to find router” or “DHCP” error.
– Confirm that your phone is connected to a 2.4GHz WiFi network.
– Check whether the router password you entered is correct.
– Confirm that the DHCP service is enabled on you· router settir1gs.
– Make sure that your WiFi signal is st rong.
– Temporarily d isable your 5GHz 11et,vork.
– If you l1ave a mesh 11etwork/router that does not a llow you to disable
5GHz, t ry to move farther away from your router until your phone moves to the
2.4GHz band.
– For more Con11ectio11 Troubleshooting tips, visit atomismart.com
/connection-troubleshooting/
My Atomi Smart device appears as “Unavailable” or “Offline” in the app.
Refresh the device list.
I just replaced my router.
If you replace your router, you will need to reset your devices and odd them
again to the opp.
How to reset my device?
Press and h0ld the Power button for 10s. Confirm that the light starts
flashing.
How to control multiple lights simultaneously?
– Open the Atomi Smart opp and select one of the
outdoor lamps that you’ve added .
– Press the ‘Edit’ button on the top- right corner of the screen.
– Press ‘Create Group’ and select your lights.
– Press ·save’. You con now control your outdoor lamps simultaneously.
For more information about app and device features. tutorials and troubleshooting tips go to: www.atomismart.com/helpOutdoorLamp
FCC Statement
The following terms and conditions apply to the promo code;
- Coupon is only valid on the Atomi Smart website www.atomismart.com.
- A valid code must be entered at the checkout page in order to redeem the promotion.
- Customers can only redeem one time at checkout.
- Customers can only use the promo code once.
- Atomi Smart reserves the right to cancel or modify any order. or revoke the use of the promo code for any reason.
- Unless otherwise stated, promo codes are not valid in conjunction with other promotions or discounts.
- Additional terms and conditions may be specified in relation to specific promo code (for example, duration, eligibility, discount amount and products covered), and will govern the use and redemption of those vouchers.
- Promo code is not exchangeable for cash.
- Atomi Smart will not be liable and/or be required to offer replacement codes, discounts, credits, cash or otherwise compensate customers for
a. discontinued or cancelled promo code:
b. improper use of. or inability to redeem, a promo code; or
c. the inability to redeem promo code due to technical issues.
FCC Notice: This device complies with Part 15 of the FCC Rules.
Operation is subject to the two following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-
located for operating in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Caution: Modifications not approved by the party responsible for
compliance could void user’s authority to operate the equipment.
For questions or concerns, email us at
support@atomiusa.com Manufactured and marketed
by Atomi Inc. 10 West 33rd St., New York, NY 10001 atomin” is a trademark of
Atomi Inc. atomi smart® is a registered trademark of Atomi Inc. Designed by
Atomi in New York. Made in China
Five-year limited warranty from the date of purchase against defects in
material and workmanship.
The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Atomi Inc is under license. Other trademarks and trade names are those of their respective owners.
Still can’t connect?
Need assistance?
Our friendly customer service te am will
work hard to put a smile back on your face.
Here’s how we can connect.
1-800-757-1440
Mon Fri g:oO 5:00 EST (U.S)
Welcome to the Atomi Smart family!
We know you will love our products so much that we are giving you an exclusive
15% off your next purchase on atomismart.com.
Log onto
https://atomismart.com/shop-now/
Add to Cart
Enter promo code ATOMl15OFF
Proceed to checkout
Free shipping on orders over $50 within the contiguous US only
Terms and 001dltlons apply.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>