Foxwell NT809 Bidirectional Scan Tool User Guide

June 12, 2024
Foxwell

NT809 Bidirectional Scan Tool
User Guide QUICK START GUIDE
Shenzhen Foxwell Technology Co., Ltd.

Vehicle Connec3tiol

Tablet with cable

  1. Locate the data link connector (DLC) under the dash on the driver side of the vehicle.
  2. Connect the Diagnosic cable to the scamer and tighten the captive screws to ensure good connection.
  3. Connecta correct adapter to the data cable according to the vehicle being senviced and plug it ito the veicle DLC.
  4. Switch the ignition key to the ON position.

Tablet with VCI dongle : Bluetooth Connection

  1. Locate the data link connector (DLC) under the dash on the driver side of the vehicl.
  2. Connect the Diagnostic cable to the VCI dongleandplug it into the vehicie DLC with a correct adapter.
  3. Switch the ignition key to the ON position.
  4. Checkif the connection indicator is correct. if yes, it means the scanner s ready to start diagnoss.

Tablet with VCI dongle: USB Connection

Foxwell NT809 Bidirectional Scan Tool - buletooth
connection

  1. Locate the data link connector (DLC) under the dash on the driver side of the vehicl.
  2. Connect the Diagnostic cable to the VCI dongleandplug it into the vehicie DLC with a correct adapter.
  3. Switch the ignition key to the ON position.
  4. Connect the VCI dongle 1o the tablet with the USB Type-8 cabie.
  5. Checkif the connection indicator fs correct. If yes, it means the scanner s ready to start diagnoss.

Registration

NOTE
Please make sure your network works correctly and the tablet is fully charged or connect to external power supply.

  1. Press Update from home screen of diagnostic APP, and then press Free Registration to start.Foxwell NT809 Bidirectional Scan Tool - app
  2. Enter one of your emails and tap Send Code to get a 4-digit security code. Input the code, create a password and click Free Registration to complete.
  3. Foxwell NT809 Bidirectional Scan Tool - app 1The serial number will be recognized automatically and click Submit to activate the scanner.Foxwell NT809 Bidirectional Scan Tool - app 2

Update

  1. Press Update from home screen of diagnostic APP.
    Foxwell NT809 Bidirectional Scan Tool - app 3

  2. The available updates display. Click Update button behind the software you wish to update

Pictures illustrated here are for reference only and this Quick Start Guide is subject to change without prior notice. For more detailed operations, please refer to the User’s Manual.

Diagnostic Operations

Before start diagnosis, please make sure:

  1. The ignition switch is turmed to ON position.
  2. The engine is off.
  3. The vehicle battery voltage is between 10-14 volts.
  4. The scanner is correctly connected to the vehicle.

Don’t connect or disconnect the equipments while the ignition is on or the engine is running.

  1. Establish communication with the vehicle either via Bluetooth/USB or cable connection.
  2. Identity the vehicle either by VIN reading or manually entry.
  3. Find the control modules installed in the vehicle either by Quick Scan or manual selection.
  4. Start the tests and make records of test data when necessary.

Powering up the Scanner

Before using the diagnostic APP of the scanner (including updating the scanner), please make sure to provide power to the scanner. In case of low battery volume, please charge it with the USB Type-C cable.
The unit operates on any of the following sources:
Foxwell NT809 Bidirectional Scan Tool - batteryFoxwell NT809 Bidirectional Scan Tool - usb
cable

One Touch Complaint

ONE Touch Complaint collects the necessary data from the vehicle which helps the troubleshooting of diagnostic failures.

  1. Click during the diagnostic process when face a failure.
  2. Input the necessary information in the complaint sheet. And the data logging file will be la collected automatically.
  3. Press Upload to send to Foxwell server directly when connecting with Wifi or Press Save to save the complaint and send to us later.(The saved complaint can be found at Data Manager–Data Record menu.) Press Email to share or PDF to print. And press Back to cancel.

Remote control

Whenever you need to get remote support from Foxwell,

  1. Click the Remote Control icon at the home screen to start TeamViewer.Foxwell NT809 Bidirectional Scan Tool - remote control
  2. Press QuickSupport icon and the TeamViewer ID will show.
  3. Send your ID to us to let our team to take control your tablet.Foxwell NT809 Bidirectional Scan Tool - ID

Contact Us

For service and support, please contact us.

WebSite:  www.foxwelltech.us
E-mail: [email protected]
Service Number : + 86 – 755 – 26697229
Fax: +86 – 755 – 26897226

REGISTER YOUR PRODUCT AThttp://www.foxwelltech.us/register.html
Pictures illustrated here are for reference only and this Quick Start Guide is subject to change without prior notice.
For more detailed operations, please refer to the User’s Manual

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Foxwell User Manuals

Related Manuals