Bebe Stars 844-186 Crib Crystal Graphite User Manual
- June 12, 2024
- Bebe Stars
Table of Contents
Bebe Stars 844-186 Crib Crystal Graphite
IMPORTANT INFORMATION
Your child’s safety depends on you. Proper bed side crib usage cannot be assured unless you follow these instructions
WARNINGS
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Conforms to safety requirements EN 1130:2019
-
Do not use this product without reading the instructions for use first.
-
Suitable for babies with maximum weight of 15kgs.
-
Stop using the product as soon as the child can sit or kneel or pull itself up.
-
Placing additional items in the product may cause suffocation.
-
Do not place the product close to other objects, which could present a danger of suffocation or strangulation, e.g. strings, blinds/curtain cords, etc.
-
Do not use more than one maress in the product.
-
The product should be placed on a horizontal floor.
-
Young children should not be allowed to play unsupervised in the vicinity of the crib.
-
The crib should be locked in the fixed position when the child is le unattended.
-
All assembly fings should always be tightened properly and care should be taken that no screws are loose, because a child could trap parts of the body or clothing (e.g. strings, necklaces, ribbons for babies’ dummies, etc.), which would pose a risk of strangulations.
-
Be aware of the risk of burning cigarettes, open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the crib.
-
DO NOT use crib if any parts are missing, damaged, or broken. Contact Bebe Stars for replacement parts and instructions if needed.
DO NOT substitute parts. -
Use only accessories or spare parts sold or approved by the manufacturer.
-
Only use the maress sold with this crib, do not add a second maress on this one, there is a suffocation hazard
When your children can sit, kneel or crawl, do not use the crib.
NEVER leave your child unattended
COMPONENTS
- Sleeping nest
- Removable guardrail
- Height adjust handle
- Wheels
- Supporting tube
- Storage basket
- Mattress
ASSEMBLY INSTRUCTIONS
Frame assembly
-
Insert the supporting tubes into the plastic joints (a, b, c, d) unl you hear a “click”.
-
Insert the bracket tube into the plastic joints (e,f) until you hear a “click”.
-
Frame fully assembled
Bassinet assembly
-
Stick the velcro to cover the bracket.
-
Zip all the zippers on the bassinet.
-
Place the maress flat into the bassinet
-
The crib is fully assembled.
WARNING: Always completely raise the drop side when not attached to the parent’s bed.
OPERATION INSTRUCTIONS
Height adjustment
Unbutton the plastic height adjust handle (a) on both sides so you can raise
or lower the bassinet.
Removal of the guardrail
A. Unzip the zippers on both sides of the guardrail.
B. Push the buttons as indicated by the arrows on them.
C. Remove the ends of the guardrail.
D. Roll up the guardrail tube and fix it with the elastic cord.
Use as bedside sleeper
Place the straps under the parent’s bed mattress and attach them on the crib with the buckles.
Make sure the crib’s legs are touching the parent’s bed sideboard (a). Step
down the locking handles on the wheels (b) to lock the crib in place.
Installing the mosquito net.
Aach the clips of the mosquito net to the guardrail tubes on both sides of the crib and cover the bassinet .
CARE INSTRUCTION
Plastic and metal parts may be sponged lightly using warm water and a mild
detergent. Dry thorougly before storing.
Never clean any part of the product with abrasive, ammonia based, bleach based
or spirit type cleaners.
Do not twist; do not spin-dry; do not iron.
WARNING! During the removal and/or application of the mattress cover,
handle the fabric carefully in order to avoid accidental damage.
Thank you for choosing Bebe Stars products
bebestarsbygilis
@bebe.stars
bebestarsbygilis
63200 | Nea Moudania | Greece
FOLLOW US
www.bebestars.gr
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>