xpr MTPXS-OSDP-MF Elegant Mifare RFID Reader Installation Guide
- June 12, 2024
- xpr
Table of Contents
MTPX-OSDP-MF
MTPXS-OSDP-MF, MTPXBK-OSDP-MF
CSN reader with OSDP interface
INSTALLER’S MANUAL
SPECIFICATIONS
Technology:Proximity (13.5 MHz, ISO14443-A)
Interface: RS-485, OSDP compatible
Supported credentials: Mifare (Classic, Desfire, Plus, Ultralight)
Read range: Up to 6 cm
Power supply: 9 – 14 VDC, 120 mA
Sound Indicator: Internal buzzer
LED Indicators: Red, Green and Orange (Red + Green)
Environmental rating: Outdoor, IP65
Operating humidity: 5% – 95% relative humidity,
non-condensing
Operating temperature: -20°C to 50°C
Mounting: Surface mount
Panel connection: Cable 0.5 m
Dimensions (mm): 92 x 51 x 27
MOUNTING
Rubber gasket
Front Back Mounting base (optional)
WIRING
Wrap the wires around the ferrite core (1 turn).
The ferrite core is provided with the kit and it is used to reduce the EMI.
Connection reader to OSDP controller
Recommended cabling: Multiconductor cable 2 twisted pair with shielding.Max
length: up to 1200m.The cable shielding will be connected to the fixing clamp
of the access unit.
PROGRAMING AND SETTINGS
Procedure for SCBK (Secure key for OSDP communication) Reset: Power the reader. Set DIP Switch 1 to ON and in the less than 5 sec set it back to OFF position.
VISUAL AND AUDIO SIGNALIZATION
All signalization is managed by the OSDP controler except: Reader OFFLine: Red blinking LED.
SOFTWARE SETTINGS
XPR Toolbox is software for settings and firmware update of the reader. Reader is ready to be used “out of the box”, so is not required to be configured by the software. XPR Toolbox can be downloaded from https://software.xprgroup.com/
CONNECTION TO PC
To setup the reader or update the firmware, run the XPR Toolbox and select
”OSDP Standard readers”and ”MTPX-OSDP-MF” and click on “Open” tab. Follow the
instruction in the software to set up or update firmware.
This product herewith complies with requirements of EMC directive 2014/30/EU,
Radio Equipment Directive 2014/53/EU.
In addition it complies with RoHS2 directive
EN50581:2012 and RoHS3 Directive 2015/863/EU. ****
Documents / Resources
| xpr
MTPXS-OSDP-MF Elegant Mifare RFID
Reader
[pdf] Installation Guide
MTPXS-OSDP-MF, MTPXBK-OSDP-MF, MTPXS-OSDP-MF Elegant Mifare RFID Reader,
Elegant Mifare RFID Reader, Mifare RFID Reader, RFID Reader, Reader
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>