KlipXtreme KTE-100BK Sports Wireless Earbuds User Manual

KlipXtreme KTE-100BK SportsBuds User Manual

Sports Buds
KTE-100BK

Introduction

Thank you for purchasing the KlipXtreme KTE-100BK True Wireless Stereo (TWS) earbuds with Bluetooth ® compatible wireless technology. We encourage you to read this quick installation guide thoroughly to get the most out of this wireless device.

Main features

• True Wireless Stereo, streams audio without cables between the earbuds
• Amazing sound quality to keep you motivated during your workouts
• Ear hooks enable high impact exercise while keeping the earbuds in place
• Wireless connectivity through Bluetooth® v5.1 compatible devices
• Battery playback of 18 hours total and 6 hours for each cycle
• Smart touch design to use the earbuds with a simple tap
• Compatible with Google and Siri voice assistant for true hands-free control with just one touch
• IPX3 waterproof and sweatproof protection
• Charging case that automatically provides power to the earbuds when placed in the case
• USB-C port for faster charging speed
• Microphone with noise reduction technology for hands-free conversations
• Sleek and attractive design

Package content

• Wireless earbuds (2)
• Charging case (1)
• Type C charging cable (1)
• Quick installation guide (1)

Product overview

1. Earbud LED indicator
2. Multifunction button: press the multifunction button to start and pause media, to answer or end an incoming call, and to summon the Google or Siri voice assistant
3. Microphone
4. Type C charging port: insert the Type C cable in this port to charge the battery
5. Charging case battery LED indicator: when the charging case is charging, the LED indicator flashes red. When it reaches full charge, the LED light remains on. When the case charges the earbuds, the LED indicator is solid blue. It turns off once it completely charges the earbuds.

Basic operation

Charging the case and earbuds

1. To charge the case, plug the supplied USB cable into a power source and the Type C end into the case’s charging port. The LED indicator flashes red. When it reaches full charge, the LED light remains on.
2. Charging the case battery to its full capacity may take 1.5 hour.
3. Unplug the case from the power source and place the earbuds on the sockets of the charging case.
4. While the earbuds are being charged, the LED indicator lights solid red. It takes 1.2 hour to fully charge the earbuds.
5. The fully charged earbuds have up to 18 hours of total run time depending on the volume level and type of music file being played. Battery runtime can last 6 hours per charging cycle (3) for an estimated total of 18 hours combined.

Turning your earbuds on or off

1. The earbuds automatically turn on when removed from the charging case.
2. The right earbud’s blue LED indicator turns off when both earbuds synchronize.
3. The earbuds automatically turn off when placed in the charging case.

Advanced operation

TWS pairing

Simply take the earbuds out of the charging case. They will sync with each other automatically, and then enter into pairing mode.

Note: Before installing this product, please make sure your device is Bluetooth ® compatible.

Pairing the earbuds with your mobile device

1. Turn both earbuds on by removing them from the charging case. Both earbuds synchronize automatically. One Earbud will start blinking red and blue.
2. Set your Bluetooth ® mobile device to “discover” the wireless earbuds.
3. Place both earbuds and your phone not more than three feet from each other.
4. On your mobile phone, tap the newly discovered audio device KTE-100BK being displayed in the Bluetooth ® list.
5. When the mobile device asks if you want to pair with it, click Yes or OK to accept.
6. The blue LED indicator in both earbuds turns off when they are successfully paired to the phone.
7. If after 60 seconds the pairing process fails, please repeat steps 1 through 5 as described above.
8. The earbuds turn off automatically after 5 minutes if they are not paired to a device.
9. You only need to pair the earbuds with your mobile phone once, as they reconnect with memorized devices automatically.

Pairing your earbuds in mono mode

1. If the earbuds were previously paired to your mobile device, unpair/forget them from your mobile device.

2. Remove one earbud from the charging case. The earbud starts blinking red and blue.

3. Place the mobile phone and earbud within three feet of each other. Select the KTE-100BK earbud from the list of newly discovered devices in your phone.
   Note: The KTE-100BK will appear twice in the Bluetooth ® devices list.

4. To pair the earbuds back together insert them back into the case and remove them together, this allows one to pair with the other making them a single unit.

Using the wireless earbuds

1. Answering and ending a call
   • When there is an incoming call, your phone will ring along with a tone through your earbuds.
   • Touch the multifunction button once on any earbud to pick it up. You may also press the answer button on your mobile phone to receive the incoming communication in your earbuds.
   • To end a call, press the multifunction button once again on any earbud. Likewise, you may also finish the call directly using the end key on your smartphone.
   • To reject an incoming call, press the multifunction button for 2 seconds.
2. Music playback and voice commands using your earbuds
   • Press the multifunction button once on either one of the earbuds to play and stop audio playback.
   • Triple tap the left button to go to the previous track.
   • Triple tap the right button to go to the next track.
   • Press the left button twice to lower the volume.
   • Press the right button twice to increase the volume.
   • When audio is being played or paused, press, and hold the multifunction button for 3 seconds to enable the voice assistant for Siri or Google.

Troubleshooting

If you can’t connect the earbuds to your mobile phone, try the following:

• Make sure that the earbuds are charged, turned on, paired with, and connected to your mobile phone.
• Make sure the Bluetooth® feature is activated on your phone.

Precautions

• Do NOT put the earbuds under heavy pressure; keep them away from heat.
• Your earbuds are powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with compatible chargers.
• Unplug the USB charger from the source when not in use.
• Parts of the earbuds are magnetic. Metallic materials may be attracted to the earbuds. Do not place credit cards or other magnetic storage media near the earbuds as information stored on them may be erased.
• Do NOT drop, hit, or shake the device.
• Do NOT disassemble, repair, or modify the earbuds yourself.
• Do NOT use strong chemicals, solvents, or detergents to clean the device.

Technical specifications

¹ Range estimate is based on an area free and clear of obstacles and interference, and within the line of sight between devices.

² Depending on the volume level and type of music file being played.

³ Battery runtime can last 6 hours per charging cycle (3) for an estimated total of 18 hours combined.

FCC statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

For more information, go to www.klipXtreme.com.

KlipXtreme® is a registered trademark. All rights reserved. The Bluetooth ® brand is a registered trademark owned by Bluetooth SIG, Inc. Siri and all related logos are trademarks of Apple.com, Inc. Google Assistant is a trademark of Google LLC. All other brand names and trademarks are the property of their respective owners. Any mention of such is only intended for identification purposes, and therefore shall not be construed as a claim to any or all rights pertaining to those brands. Made in China.

www.klipXtreme.com.

Documents / Resources

| KlipXtreme KTE-100BK Sports Wireless Earbuds [pdf] User Manual
KTE-100BK Sports Wireless Earbuds, KTE-100BK, Sports Wireless Earbuds, Wireless Earbuds, Earbuds
---|---

References

• Apple
• Home - Klip Xtreme

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>