PEXMAN PM-50 2.1 CH Portable Bluetooth Fabric Speaker User Manual
- June 4, 2024
- PEXMAN
Table of Contents
PEXMAN PM-50 2.1 CH Portable Bluetooth Fabric Speaker
Features
- 2.1CH portable Bluetooth fabric speaker
- Water resistant IPX5, splash-proof, rainproof, perfect for beach, poolside, boat and more outdoor activities
- Dedicated button for TWS function, achieve true wireless Bluetooth playing with double enhanced stereo sound
- Karaoke function with single input for one wired microphone
- Optimized Google Assistant and Siri voice control
- Hands-free Mic for easy picking up the cal
- EQ function offering dynamic sound effect
- RGB Lighting
- With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device
- Power bank function support 5V, 1A output
- Line-in function, suitable for PC, MID, TV and other audio devices
- Built-in lithium rechargeable battery 7.4V 4400mAh
- Strong carry handle, easy to take out
Specifications
- Bluetooth version: V5.0
- Horn Size: 3 inch*2
- Subwoofer Size: 5 inch
- RMS Power Output: 4OW
- Peak Power Output: 88.5W
- Battery Capacity: 7.4V, 4400mAh
- Play time: 4 hours at maximum volume
- Frequency Response: 50Hz-15kHz
- Bluetooth connecting range: 10m
- Product size: 452(L) 182 (W) 234 (H) mm
Package Contents
- 1x Portable Bluetooth Speaker
- 1x Charging cable
- 1x Audio cable
- 1x User Manual
Product Details
- Backward/Volume down
- Forward/Volume Up
- RGB Light
- Play/Pause
- EQ Button
- TWS Button
- Power On/Off
- Battery Indicator
- 5V 1A Output
- Charging jack
- Reset jack
- MIC port
- AUX IN port
Power On/off:
Long-press the Power button to turn the speaker on and off.
Bluetooth
- Turn the power button to “ON, the speaker enter Bluetooth mode automatically.
- Activate Bluetooth of mobile phone and search for device name “PO2S” then connect it.
- Play the music from your mobile phone and enjoy.
- Long-press Forward or Backward button on the device or operate on Mobile phone to select songs you like.
- Short-press Forward or Backward button to adjust volume up and down. Or adjust the mobile phones’ volume.
- Short-press Play/Pause button on the device or operate on Mobile phones to play/pause the music.
- Long-press TWS button to disconnect the Bluetooth connection with the mobile device.
Remark: Under Bluetooth playing mode, insert the AUX cable will disconnect the Bluetooth and switch to play the connected external audio device. Pull the AUX cable out of the speaker, the speaker will return to Bluetooth mode.
TWS Function (True Wireless Stereo):
- Turn on two identical speakers you want to pair, both under BT mode. Only need to set one of the two units.
- Short-press the “TWS button to pair, the TWS button wil keep lighting after paired successfully.
- Make Bluetooth connection with your mobile phone to play music by the two paired Speakers to create more powerful surround sound effect.
- Short-press the “TVwS” button again to exit TWS mode.
Notes: Under Bluetooth connected status, when short-press TWS button to make TWS connection, the Bluetooth connection will be disconnected first; After TWS connected, users need to search the Bluetooth device and connect again.
Power Bank Function
Turn the speaker on.
Connect other device to the 5V 1A Out port via a charging cable.
AUX-IN:
- For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to connect from the device’s “Line Out” to the “Aux In” of this device, then enjoy.
- Under any playing mode, when you use the audio cable to connect the device, it will auto-switch to the AUX mode.
- When using an external device, all functions can be controlled by the external device.
EQ Introduction:
This unit offers 2 kinds of sound effect, short-press EQ button to change the
EQ modes.
RGB Light
The RGB light is on when speaker powered on, user can short-press the RGB
Light button to turn the light off and on.
Activating Voice Assistant:
- Make Bluetooth connection with your mobile phone.
- Long-press Play/Pause button to activate voice assistant SIRI/GOOGLE ASSISTANT.
Hand-free call:
- Under Bluetooth connection status, if there is an incoming call, user can short-press Play/Pause button to accept the call or long-press Play/Pause button to reject the call.
- During the call, user can long-press Play/Pause button to switch to talking on the phone.
- Short-press Play/Pause button or operate on mobile phone to end the call.
Reset Functionality:
If the speaker does not turn off or respond, user can short-press the Reset
jack with a small round pin to reset the speaker.
More Remarks:
- Default volume is at 30% status of max volume.
- Play time may vary depending on volume level and music style.
How to charge:
- The charger is not included in the package, please charge thee speaker via a standard 5V/1-3A charger or via a PC.
- Charge time should be 5-9 hours. After full charging, the 4 LEDS is off when speaker off.
IMPORTANT:
When playing music during charging, please put the volume to middle, because
for some music with heavy bass, the charger may not be able to afford the high
current temporarily under the maximum volume.
Warning
- Don’t use/store this speaker in extreme temperatures.
- Please store it in cool and dry area, keep away from anything that generates heat, such as radiators, stoves, etc.
- In order to have hearing protection and an extended speaker life, avoid listening to songs on maximum volume.
- When cleaning this speaker, use a soft dry cloth. For more sever stains, please dampen the cloth with water only. Anything else has the chance of dissolving the paint or damaging the plastic.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>