Galaxy Audio JIB/BT4R Dual XLR Bluetooth Receiver User’s Manual

Galaxy Audio JIB/BT4R Dual XLR Bluetooth Receiver

Introduction

Thank you for choosing the Galaxy Audio® professional, lightweight, compact, portable XLR Bluetooth® Receiver. The JIB/BT4R interfaces high-quality stereo Bluetooth® audio wirelessly from a Bluetooth® enabled smart device to an active speaker or mixing console using an XLR line output. You have joined the ranks of countless satisfied customers. Our years of professional experience in design and manufacturing ensure our products’ quality, performance, and reliability.

Safety

IMPORTANT SAFETY INSTRUCTIONS!

1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with a dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manu­factures instructions.
8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
13. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is dam­aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled with liquids, such as vases, on the apparatus.

System Components

The JIB/BT4R includes the following components:

JIB/BT4R Receiver (x2 in Dual JIB/BT4RS System) Micro USB Charging Cable (x2 in Dual JIB/BT4RS System) Quickstart Guide

JIB/BT4R Receiver Features and Functions

JIB/BT4R Stereo Bluetooth® Receiver

Receiver Features:

Front Panel

1. Micro USB Charging Input
2. Power Switch
3. PAD Switch
4. Charge Status LED Indicator
5. Bluetooth® Pairing & Stereo-Link Button
6. Pairing Status LED Indicator
7. XLR Output Connector

Receiver Functions:

1. MICRO USB INPUT: Connect the included micro USB charging link to recharge or supply power indefinitely.
2. POWER: Switch between ON/OFF to power the receiver on or off. The receiver is automatically in pairing mode when powered on. If previously paired, it will remember the previous device after powering on.
3. PAD (0dB or -10dB): When plugged into Mic level input, the pad switch should be engaged.
4. CHARGE LED: The charge/battery indicator will flash blue quickly when the battery is low. When charging, the light will remain a solid blue. Once fully charged, the LED indicator will turn off.
5. PAIR/STEREO-LINK Button: Pressing the PAIR/STEREO-LINK button on two receivers will allow them to connect to each other. It can also be used to disconnect the 2nd receiver.
6. PAIR STATUS LED: Indicated when the receiver is in pairing mode, paired, and when music is transmitting to it.
7. XLR OUTPUT: Connect the receiver to your active loudspeaker, amp, or mixer XLR input.

Receiver Bluetooth® Pairing and Unpairing

Wireless Pairing Setup

1. Power On Receiver:
   Flip the POWER switch to “ON”. The receiver will immediately be in pairing mode.
   NOTE: The “PAIR” LED will quickly flash blue and red while unpaired.

2. Ready Your Bluetooth® Enabled Device:
   Make sure your Bluetooth® enabled device has its Bluetooth® feature turned on and is within range.

3. Pair Your Bluetooth® Enabled Device:
   Find the receiver (JIB/BT4R) in your device’s Bluetooth® settings to connect.
   NOTE: Once paired, the “PAIR” LED will slowly flash blue.

4. Play Your Audio:
   On your Bluetooth® device, start playing audio.
   NOTE: While playing, the “PAIR” LED will remain a solid blue.

Stereo-Link Setup (Optional)

1. Pair a Single Receiver:
   To Stereo-Link, you must have two receivers. Pair the first JIB/BT4R to a Bluetooth® enabled device by following the previous steps.

2. Stereo-Link Receivers:
   With the first JIB/BT4R receiver paired, and the 2nd JIB/BT4R receiver powered on and unpaired, press and release the “STEREO-LINK” button on both receivers at the same time.
   NOTE: Before the 2nd receiver is linked, it will flash red and blue quickly when it is ready to link. Once both receivers are linked, they will slowly flash only blue. When audio is being transmitted, both receivers will remain a solid blue.

Disconnecting Stereo-Link, Bluetooth® Connection, and Changing Paired Device

1. Disconnecting Stereo-Link:
   To disconnect the Stereo Link, press and hold the “STEREO-LINK” button on either one receiver.
   NOTE: The disconnected receiver will be the secondary that did not first pair with the Bluetooth® device. The disconnected receiver’s “Pair” LED will alternate flashing between blue and red.

2. Unpair From Your Bluetooth® Enabled Device:
   To disconnect, press the “PAIR” button. The status LED will alternate between blue and red, signaling that the receiver is unpaired and ready to pair to a new device.
   NOTE: The receiver will remember the previously connected device for the next use. You can play audio from that same device. To use a different Bluetooth® enabled device, you will need to disconnect from the previous device first.

3. Pair Your New Bluetooth® Enabled Device: Repeat the previous pairing steps with your new device.
   NOTE: The JIB/BT4R uses a Bluetooth® 4.0 chip and has a range of up to 10 meters under optimal conditions. Once the JIB/BT4R is paired with a Bluetooth® device, other Bluetooth® devices cannot pair to it. There is always a chance of interference with any Bluetooth® connection. Bluetooth® is in the same frequency band as many cell phones and WiFi routers. These have higher outputs than Bluetooth® and can cause interference.

Receiver Setup

1. Pair Your Receiver:
   Before connecting the receiver to equipment, it is easiest to go through the pairing process first. If Stereo-Linking two receivers, link them first as well.

2. Connecting To Equipment:
   Plug into any active speaker, amp, or mixer that has XLR Input connections.
   NOTE: You can connect to most mixers, amplifiers or other devices that accept line-level inputs.

3. Power:
   Make sure the receiver is charged before each use. Alternatively, you can plug the receiver into a power source using the included micro USB cable for continuous power while in use.

4. Adjusting Levels:
   Volume can be controlled with the Bluetooth® enabled device, most active speakers, amps, and mixers.
   NOTE: It is recommended to adjust the volume of devices in the following order:

   • Adjust the Bluetooth® enabled device volume higher.
   • If using a mixer, first adjust the input channel levels and then its main output level.
   • The active Speaker/Amp should be the last volume adjustment.

5. PAD Switch:
   When plugged into Mic level input, the pad switch can be engaged for appropriate sensitivities. Lowering the input signal sensitivity can help to avoid signal overload and distortions.

Specifications

• Bluetooth® Version: V4.0
• Frequency Range: 2.4GHz – 2.48GHz
• Input Connector: Micro USB Charging Input
• Output Connector: XLR/M
• Controls: PAD Switch, Bluetooth® Pair/Stereo-Link Button
• Indicators: Charging LED, Stereo-Link/Pair LED
• Sensitivity: -80dBm < +/-0.1 % BER
• Signal to Noise: > 75dB
• Total Harmonic Distortion: <0.1 %
• Operating Range: Under Typical Conditions 32.8′ (10 m)
  • Note: actual range depends on RF signal absorption, reflection, interference, and battery characteristics
• Operating Temperature: Range -40° F to 176° F (-40 c0 to +80 C0)
  • Note: battery characteristics may limit this range
• Dimensions: 4.9″ x 1.32″ x 1.1″ (124 x 33.4 x 27.5 mm)(HxWxD)
• Weight: 3.35 oz (95 g)
• Power Requirements: Internal 3.7V Rechargeable Lithium Battery Power Supply Battery Operation: About 10 hours

1. www.galaxyaudio.com
2. www.galaxyaudio.com/support/warranty
3. www.galaxyaudio.com/products/JIB-BT4R

THREE YEAR LIMITED WARRANTY

WARRANTY Information can be viewed online at https://www.galaxyaudio.com/support/warranty

Specifications in this manual are subject to change without notice. For the most up to date manual and information visit

• www.galaxyaudio.com.
• 1-800-369-7768

© Copyright Galaxy Audio 2019

FREQUENTLY ASKED QUESTIONS

What is the Galaxy Audio JIB/BT4R Dual XLR Bluetooth Receiver?

The Galaxy Audio JIB/BT4R is a dual-channel Bluetooth receiver that allows you to wirelessly connect Bluetooth-enabled devices to sound systems via XLR outputs.

What is the main function of the JIB/BT4R Bluetooth Receiver?

The JIB/BT4R allows you to receive audio wirelessly from Bluetooth devices and route it to professional sound systems through XLR outputs.

What type of devices can be paired with the JIB/BT4R?

The JIB/BT4R can be paired with Bluetooth-enabled devices such as smartphones, tablets, laptops, and other devices that support Bluetooth audio streaming.

How many channels does the JIB/BT4R support?

The JIB/BT4R is a dual-channel receiver, meaning it can receive audio from two separate Bluetooth devices simultaneously.

What are the output options on the JIB/BT4R?

The JIB/BT4R features XLR outputs, which are commonly used in professional audio setups.

Is the JIB/BT4R suitable for live performances and events?

Yes, the JIB/BT4R can be used for live performances and events where wireless audio connectivity is desired.

Does the JIB/BT4R support stereo audio output?

Yes, the JIB/BT4R supports stereo audio output, allowing you to transmit left and right audio channels.

Is the JIB/BT4R powered via batteries or AC power?

The power source for the JIB/BT4R can vary. Some versions might run on batteries, while others might require AC power.

What is the effective wireless range of the JIB/BT4R?

The wireless range can vary, but Bluetooth typically has a range of up to around 30 feet (10 meters) under optimal conditions.

Can the JIB/BT4R be used in recording studios?

Yes, the JIB/BT4R can be used in recording studios to receive audio wirelessly from Bluetooth-enabled devices.

Does the JIB/BT4R offer any control over audio quality settings?

The JIB/BT4R might offer basic control over audio quality, but it's primarily designed for ease of use and convenience.

Is there a delay in audio transmission when using the JIB/BT4R?

Bluetooth audio transmission can introduce a slight delay, known as latency. The level of latency can vary based on the Bluetooth protocol and devices used.

Is the JIB/BT4R compatible with all Bluetooth devices?

The JIB/BT4R is generally compatible with most Bluetooth audio devices, but compatibility can depend on the specific Bluetooth profiles supported by the device.

Can the JIB/BT4R be integrated into professional audio setups?

Yes, the JIB/BT4R is designed for professional audio applications and can be integrated into various setups.

Is the JIB/BT4R easy to pair with Bluetooth devices?

Pairing processes can vary, but Bluetooth pairing is usually straightforward and guided by the device's user manual.

Download the PDF Link:Galaxy Audio JIB-BT4R Dual XLR Bluetooth Receiver User’s Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>