KERN MSW 200 Handy Scope Meter Instructions
- June 12, 2024
- KERN
Table of Contents
MEDICAL SCALES 2022
Tape for measuring circumference KERN MSW · MBA-A01
PROFESSIONAL CARE
APPROVED MEDICAL DEVICE
MSW 200 Handy Scope Meter
Circumference
measuring tape and height rods for professional use in medical diagnostics
- KERN MSW 200 Convenient tape for measuring circumference with convenient pull-out mechanism
- KERN MBA-A01 Portable mechanical height rod
Features
-
Continuous pull-out measuring tape for precise measurement e.g. around the body
-
Ideal to determine the WHR (Waist-to-HipRatio), which can give information about the distribution of the body’s fat deposits using an indirect determination of abdominal fat
-
Useful diagnosis instrument
-
Integrated feed mechanism
-
The easiest handling:
– Pull out the measuring tape,
– Hang it in the recess provided for this,
– Operate the feed mechanism,
– Read measurement value with millimetre precision -
Measuring tape length 2,05 m (80 inch)
-
Net weight approx. 0,05 kg
-
Note: The models are only delivered in a set of 5 units. That means the price refers to a delivery of 5 units. Cannot be delivered individually.
-
Robust construction
-
Compact size
-
Easy and hygienic cleaning
-
For babies up to a maximum of 80 cm
-
Measuring range 30–80 cm (11,8-31,5 inch); increments of 1 mm (0,04 inch)
-
Readability on scale with moveable stop
-
Large guide surfaces make handling easier (aligning, shifting, reading)
-
Overall dimensions max. W×D×H 850×240×60 mm
-
Net weight approx. 0,36 kg
Pictograms
| Adjusting program CAL:
For quick setting up of the balance‘s accuracy.
External adjusting weight required
---|---
| Memory:
Balance memory capacity, e.g. for article data, weighing data, tare weights,
PLU etc.
| Data interface RS-232:
To connect the balance to a printer, PC or network
| Control outputs (optocoupler, digital I/O):
To connect relays, signal lamps, valves, etc.
| Statistics:
using the saved values, the device calculates statistical data, such as
average value, standard deviation etc.
| PC Software:
to transfer the measurements from the device to a PC
| GLP/ISO log:
With date and time.
Only with KERN printers
| KERN Communication Protocol (KCP):
It is a standardized interface command set for KERN balances and other instru
ments, which allows retrieving and controlling all relevant parameters and
functions of the device. KERN devices featuring KCP are thus easily integrated
with computers, industrial controllers and other digital systems
| Piece counting:
Reference quantities selectable. Display can be switched from piece to weight
| Totalising level A:
The weights of similar items can be added together and the total can be
printed out
| Weighing units:
Can be switched to e.g. nonmetric units.
Please refer to website for more details
| Weighing with tolerance range:
(Check weighing) Upper and lower limiting can be programmed individually, e.g.
for sorting and dosing. The process is supported by an audible or visual
signal, see the relevant model
| Hold function:
When patients do not stand, sit or lie completely still, a stable weight is
calculated using an average weight
| Hold function:
When the weighing conditions are unstable, a stable weight is calculated as an
average value
| ZERO:
Resets the display to “0”
| Protection against dust and water splashes
IPxx: The type of protection is shown in the pictogram cf. DIN EN
60529:2000-09, IEC 60529:1989+A1:1999+A2:2013
| Suspended weighing:
Load support with hook on the underside of the balance
| Battery operation:
Ready for battery operation. The battery type is specified for each device
| Rechargeable battery pack:
Rechargeable set
| Universal plug-in power supply:
with universal input and optional input socket adapters for A) EU, CH; B) EU,
CH, GB, USA
| Plug-in power supply:
230V/50Hz in standard version for EU. On request GB, AUS or USA version
available
| Integrated power supply unit:
Integrated in balance. 230V/50Hz standard EU. More standards e.g. GB, AUS or
USA on request
| Weighing principle: Strain gauges Electrical resistor on an elastic
deforming body
| Peak hold function:
capturing a peak value within a measuring process
| Push and Pull:
the measuring device can capture tension and compression forces
| Integrated scale:
In the eyepiece
| 360° rotatable microscope head
| Monocular Microscope:
For the inspection with one eye
| Binocular Microscope:
For the inspection with both eyes
| Trinocular Microscope:
For the inspection with both eyes and the additional option for the connection
of a camera
| Abbe Condenser:
With high numerical aperture for the concentration and the focusing of light
| Halogen illumination:
For pictures bright and rich in contrast
| LED illumination:
Cold, energy-saving and especially long-life illumination
| Fluorescence illumination
for compound microscopes:
With 100 W mercury lamp and filter
| Fluorescence illumination
for compound microscopes:
With 3 W LED illumination and filter
| Phase contrast unit:
For a higher contrast
| Darkfield condenser/unit:
For a higher contrast due to indirect illumination
| Polarising unit:
To polarise the light
| Infinity system:
Infinity corrected optical system
| Automatic temperature compesation:
For measurements between 10 °C and 30 °C
| Verification possible:
The time required for verification is specified in the pictogram
| Package shipment:
The time required for internal shipping preparations is shown in days in the
pictogram
| Pallet shipment:
The time required for internal shipping preparations is shown in days in the
pictogram
Your KERN specialist dealer
Documents / Resources
| KERN
MSW 200 Handy Scope
Meter
[pdf] Instructions
TMBA-A01-A, MSW 200, MBA-A01, MSW 200 Handy Scope Meter, Handy Scope Meter,
Scope Meter, Meter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>