Essential Audio Tools C13 Current Conductor User Manual
- June 16, 2024
- essential audio tools
Table of Contents
Essential Audio Tools C13 Current Conductor
Specifications
- Mains Connector: Schuko
- Conductor type: OFC, stranded
- Screening: Braided tinned copper + aluminium foil
- Rated voltage: 220-250V~ @ 50/60 Hz
Description
The essentia audio too s is a power cord that is designed to enhance audio quality. By using this power cord, you can expect improvements such as quietness in silent parts of the music, more noticeable details, and a more holographic soundstage. High-quality recordings with low volume and high dynamics will benefit the most from the lowered background noise.
Safety Precautions
It is important to follow these safety precautions:
- Avoid water and other liquids: Do not expose the cable to moisture. Use the cable indoors and in dry locations only. Do not expose it to dripping or splashing. Avoid placing objects filled with liquids, such as vases, on or near the cable. If any liquid is spilled on the cable or into the connectors, return it to your dealer for servicing.
- Unplug before cleaning: Always unplug the cable before cleaning. Clean the cable with a dry cloth or duster. Do not use any cleaning solutions, sprays, or water.
- Do not exceed maximum total load: Ensure that the total current does not exceed the specified Amps.
- Check your supply voltage: This cable is designed for a maximum of 250V~ @ 50/60Hz mains supply. Connecting it to a higher voltage may damage the cable and void the warranty.
- Connect power cords safely: Route power cords in a way that they are not likely to be walked on or pinched by items. Avoid routing power cords near heat sources. To disconnect the power cord, pull it out by the plug (wall outlet side first). Do not pull the cable itself, as it may result in damage leading to fire or electric shock.
User Manual
Description
Essential Audio Tools power cords are built with two layers of screening; a 100% closed aluminium foil and a tinned braided copper screen. This double shielding protects the nearby signal cables from the fields generated by the current flowing through the conductors. It also works the other way around: preventing the conductors picking-up airborne disturbances from the environment. The twisted Oxygen Free Copper (OFC) conductors are fully capable of transporting the current your equipment needs without ohmic losses.
What to expect?
The result of experimenting with our power cords can vary from small changes
to big surprises. The most heard improvements are quietness in silent parts of
the music as well as more noticeable details and more holographic soundstage.
A high-quality recording with on average low volume and high dynamics will
benefit most from the lowered background noise.
Safety precautions
Avoid water and other liquids
To avoid risk of fire and electrical shock: do not expose the cable to
moisture. Use indoors and in dry locations only. Do not expose to dripping
and/or splashing. Do not place objects filled with liquids -such as vases- on
or near the cable. Do not use the cable if any liquid is spilled on the cable
or into the connectors; return it to your dealer for servicing.
Unplug before cleaning
Always unplug the cable before cleaning. Only clean the cable with a dry cloth
or duster. Do not use any cleaning solutions, sprays, or water.
Do not exceed maximum total load
The total current may not exceed the specified Amps.
Check your supply voltage
This cable is designed for a maximum of 250V~ @ 50/60Hz mains supply.
Connecting to a higher voltage may damage the cable and warranty will be void.
Connect power cords safely
Power cords should be routed in such a way that they are not likely to be
walked on or pinched by items. Do not route power cords near heat sources. To
disconnect the power cord, pull it out by the plug (wall outlet side first).
Do not pull the cable itself, doing so may result in damage which can lead to
fire or electric shock.
Specifications
Mains Connector Conductor type Screening Rated voltage
Schuko OFC, stranded Braided tinned copper + aluminium foil 220-250V~ @ 50/60
Hz
Warranty
Essential Audio Tools products have a warranty period of two years from date
of purchase. This warranty covers manufacturing defects and failures within
products specifications.
When warranty is claimed the original bill with the buyer’s name and date of
purchase should be presented.
Warranty will void if
- The device has not been used in conformance with the user manual.
- The device has been used in an industrial environment.
- The bill has been altered or made illegible.
- Modifications or repairs have been performed by non-authorized persons.
- Malfunction is caused by device-external conditions, such as: overloading, atmospheric discharges and fire or water damages etc.
Warranty is limited to damages regarding the cable itself: all eventual consequential damages are not covered by warranty.
More information about our products:
MORE INFORMATION:
WWW.ESSENTIALAUDIOTOOLS.COM
Essential Audio Tools: CopyRight by Square Audio BV, The Netherlands, info@essentialaudiotools.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>