HTU V14 Car Phone Mount User Manual
- June 14, 2024
- HTU
Table of Contents
HTU V14 Car Phone Mount
Product Information
The HTU Car Phone Mount is a magnetic car mount designed for holding mobile phones securely in a vehicle. It is designed with safety, convenience, and elegance in mind. The product features N52 magnets that provide a magnetic force of 20 Newton, making it safer and more secure. The car mount also includes a cable organizer to prevent messy cables in the car. It is compatible with both horizontal and vertical air vents and can accommodate various phone cases, including Magsafe cases, non-Magsafe cases, and cases without any Magsafe or magnetic features. The product is suitable for use with iPhone 12, 13, 14, and newer versions.
Product Usage Instructions
- Package Contents:
- Magnetic Car Mount
- Match-up Card
- Air Vent Installation:
- Choose a suitable air vent in your vehicle.
- Attach the Air Vent Clip to the chosen air vent by inserting it firmly.
- Ensure the Grip Nut is tightened securely to hold the Air Vent Clip in place.
- Phone Case Adaptability:
- If you have a Magsafe case, it can work directly with the magnetic car mount without any additional accessories.
- If you have a non-Magsafe case, please stick the provided MagSafe Ring to the outside of the phone case.
- Ensure that your phone case is smooth and flat. Do not stick the MagSafe Ring to an uneven phone case as it may affect the stickiness.
- Mobile Phone Adaptability:
- The magnetic car phone mount is compatible with iPhone 12, 13, 14, and newer versions.
- For bare phones, simply attach the phone directly to the Magnetic Support Panel.
- Installation Video:
- To access the product installation video, please scan the provided QR Code or visit the website http://htulink.com.
If you encounter any issues or have any questions regarding the product or its installation, please contact HTU customer service at htuservice@163.com. We strive to provide solutions until you are 100% satisfied with your purchase.
Product Introduction
A Letter from an Engineer
Dear Customer,
As a product engineer, thanks for your detailed suggestions. To live up to your trust, I have been upgrading my products since 2010.
What drive me to be a Car Mount Engineer?
- A traffic accident made me realize that the car mount is important for driver safety, cell phone safety, and vehicle safety, especially on the highway.
- I’ve been reading feedback on Amazon’s car mounts to find inspiration to design a better product for you.
Design priorities: safety first, convenience second, elegance third
I always design products with driver safety in mind, but it is not easy to match them to hundreds types of cars, and thanks to many users’ suggestions, this product was originally designed with 5 major improvements:
- No.1: Integrated with a locking reminder device that prevents from being over-fastened, providing extra protection.
- No.2: Features strong triangle support, and an extendable chromed steel clip hook, it can hold the phone tightly on the air vent.
- No.3: The cable organizer could prevent the car cables from getting messy and make the car tidy.
- No.4: We use N52 magnets to increase the magnetic force from the mainstream 15 Newton to 20 Newton, which is safer.
- No.5: For better durability (10,000 times) and thermal stability (-45°F~215°F), we adopt healthy refined materials that have been tested hundreds of times.
All the innovation means surprise or risk, but it will work in long term.
I hope that this new car mount will meet your expectation. If it doesn’t fit
your vehicle or any problem, pls contact
htuservice@163.com to get a solution until you
have 100% Satisfaction!
Best Regards!
Product Diagram
Magsafe Car Mount
Air Vent Clip
Package Contents
Wipe
Compatibility
Air Vent Compatibility
Phone Case Compatibility
- Fits 99% of phone cases such as Magsafe/ OtterBox/ Silicone/ Clear/ Rubber, except popsocket and ring case.
Adaptability
Phone Case Adaptability
- Magsafe cases can work directly without the magsafe ring.
- For Non-Magsafe cases, please stick the magsafe ring to the outside of the phone case.
- Please make sure your phone case is smooth and flat. Please don’t stick the magsafe ring to the uneven phone case, which would affect the stickiness.
Mobile Phone Adaptability
- The magnetic car phone mount shall be used in the following 3 usage conditions.
- Please choose the corresponding usage according to the model of your mobile phone.
- No MagSafe Ring is needed
- iPhone 12/13/14 or newer versions without case & with a MagSafe or magnetic case
- White Slim Magsafe Ring is needed:
- Mobile phones with a slim phone case, the back of phone case must be smooth, flat, and slim.
The below situation requires the use of a magsafe ring included:
- iPhone 14 / 13 / 12 series phones with regular smooth surface cases
- iPhone 11 series and under models with regular smooth surface cases
- Samsung Galaxy, Google Pixel, and other phones with regular smooth surface cases
Black Thick Magsafe Ring is needed
- Mobile Phones with a normal thick phone case.
Assembling the MagSafe Ring
- Use a cleaning wipe to clean the back of the phone (or phone case) where the magsafe ring be pasted.
- If use a phone case, please install the magsafe ring OUTSIDE of the phone case.
- Unfold the match-up card.Place the match-up card in the center of the phone or phone case. Align the match-up card up and down, left and right, using a MM scale. Make sure the number are the same for the horizontal sides, and so does the vertical sides.
- Remove the protective cover of the magsafe ring, and aim it at the circle of the match-up card before pasting it on the back of the phone or phone case.
- Press firmly along the magsafe ring.
- Remove the match-up card, and the installation is completed.
- After pasting the magsafe ring, leave it for 24 hours before using the magnetic phone mount.
Tips for Using the Air Vent Clip
- Applicable air vent depth: 12mm-38.7mm (0.5inch-1.5inch)
Installation Steps
- Unscrew the nut.
- Insert the nut and tighten it.
- Turn counterclockwise to extend the hook. Insert the hook into the horizontal or vertical air vent.
- Turn clockwise to lock the hook.
- Align the magsafe ring and place your phone on it.
- Take the phone from the MagSafe car mount in the upper left or upper right direction.
Cable Organizer keeps your cord organized and tidy.
We will try our best to deserve your trust.
No need to return the items.
More Information
Temperature rising makes a horrible in-car environment.
Please pay attention to the safety of pets and babies.
Car temps over time
Replacement, 24-hour response, and 5 years warranty until your 100% satisfaction if any problem:
- Email: htuservice@163.com
- Website: http://htulink.com
How to Get Product Installation Video?
Scan the QR Code
