IOGEAR GVE440 Display Port 4kHDBaseT-Lite Extender Quick Start Guide

June 12, 2024
Iogear

IOGEAR-logo

IOGEAR GVE440 Display Port 4kHDBaseT-Lite Extender

IOGEAR GVE440 Display Port 4kHDBaseT-Lite Extender-
product

Package Contents

  • 1 x 4K Display Port HDBaseT-Lite Transmitter
  • 1 x 4K Display Port HDBaseT-Lite Receiver
  • 2 x Power Adapters
  • 1 x Quick Installation Guide
  • 1 x Warranty Card

System Requirements

  • Display Port output from the source
  • Display Port input to display

It is highly recommended to use a source device with a DisplayPort 1.1 compatible graphics card.

Introduction

The GVE440 DisplayPort HDBaseT-Lite Extender is able to extend a DisplayPort display up to 70m using a Cat 6 / 6a cable. This combination of IOGEAR and HDBaseT™ technology supports sharing 4K media up to 40m away, offering a simple, adaptable, and cost-effective solution for any professional A/V installation. The GVE440 DisplayPort HDBaseT-Lite Extender is the perfect solution for professional A/V installations that require video signal interference protection, such as medical and military installations. With its lightweight and easy-to-mount design and a slip-resistant DC Jack lock mechanism, the GVE440 can be installed in a multitude of locations.

Overview

left view

right view

  • A. F/W Upgrade Port and Switch
  • B. DisplayPort Input Port
  • C. Link LED
  • D. Power LED
  • E. Power Jack
  • F. HDBaseT Output Port

Receiver

left view

right view

  • G. Power Jack
  • H. HDBaseT Input Port
  • I. Video Out LED
  • J. Link LED
  • K. Power LED
  • L. F/W Upgrade Port and Switch
  • M. DisplayPort Output Port

Hardware Installation

  1. Connect the DisplayPort video source to the GVE440 transmitter DisplayPort Input Port with a DisplayPort cable. Note: The F/W Upgrade Port is reserved for technical support. If you would like to upgrade the firmware yourself, please contact your dealer.
  2. Connect one end of the RJ-45 cable to the HDBaseT output port on the transmitter. Then connect the other end of the RJ-45 cable to the HDBaseT input port on the receiver.
  3. Connect the GVE440 receiver DisplayPort Output Port to the DisplayPort monitor with a DisplayPort cable.
  4. Plug the power adapter cable into the power jack on both GVE440 units. IOGEAR GVE440 Display Port 4kHDBaseT-Lite Extender-fig-9

TROUBLESHOOTING FAQ

  1. Will the GVE440 convert a DisplayPort signal to HDBaseT, and convert the HDBaseT signal back to DisplayPort?
    The GVE440 will convert DisplayPort video to HDBaseT.

  2. What is GVE440 and what can it do for me?
    GVE440 is a video extender that can transmit video signal up to 4K resolution via DisplayPort to another display in a remote location for high video quality demanding user groups who are professionals in the field of architecture, graphic design, performing art, video broadcasting, and so on.

  3. What DisplayPort version does GVE440 support?
    GVE440 is DisplayPort 1.1 compatible. If the display or monitor supports version 1.2, GVE440 will still work because DisplayPort 1.2 is backward compatible. Be aware that DisplayPort requires high-quality cables for signal transmission.

  4. What is the maximum extending distance?
    GVE440 can extend up to up to 70m (230ft) from the DisplayPort source at 1080P@60Hz by Cat6a cable and 40m (130ft) at 4K x 2K by Cat 6a cable.

  5. What is the maximum resolution?
    The maximum resolution is 4096 x 2160 @ 60Hz.

Compliance Information

Federal Communications Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ­ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Limited Warranty

This product carries a 3 Year Warranty. For the terms and conditions of this warranty, please go to https://www.iogear.com/support/warranty

Register online at https://www.iogear.com/register

Important Product Information

  • Product Model
  • Serial Number

Contact Information

WE’RE HERE TO HELP YOU!

NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

  1. Visit www.iogear.com for more product information
  2. Visit www.iogear.com/support for live help and product support

IOGEAR

FREQUENTLY ASKED QUESTIONS

What is the IOGEAR GVE440 DisplayPort 4k HDBaseT-Lite Extender?

The IOGEAR GVE440 is a device that allows you to extend high-definition DisplayPort signals over long distances using HDBaseT-Lite technology.

What does HDBaseT-Lite technology do?

HDBaseT-Lite technology enables the transmission of high-quality video, audio, and control signals over a single Cat5e or Cat6 Ethernet cable.

What's the maximum resolution supported by the GVE440 Extender?

The GVE440 supports resolutions up to 4K (3840x2160) at 60Hz.

What's the maximum distance this extender can cover?

The GVE440 can extend DisplayPort signals up to 130 feet (40 meters) using Cat5e or Cat6 Ethernet cables.

Does the GVE440 support audio transmission as well?

Yes, the GVE440 supports audio transmission alongside video, providing a complete multimedia extension solution.

How do I connect the GVE440 Extender?

You connect the DisplayPort output from your source device (e.g., computer) to the sender unit, and then connect the receiver unit to your display using an Ethernet cable.

Does the GVE440 Extender require external power?

Yes, both the sender and receiver units of the GVE440 require external power to function.

Can I use the GVE440 Extender with other types of video sources or displays?

The GVE440 is designed specifically for use with DisplayPort sources and displays.

Is this extender compatible with all DisplayPort versions?

The GVE440 is designed to work with DisplayPort 1.1a, which supports resolutions up to 4K at 60Hz.

Can I use the GVE440 Extender with multiple displays?

The GVE440 is designed for point-to-point connections, which means it's typically used to extend signals from one source to one display.

Does the GVE440 support bidirectional IR transmission?

Yes, the GVE440 supports bidirectional IR transmission, allowing you to control the source device from the display location and vice versa.

What types of applications is the GVE440 Extender suitable for?

The GVE440 is suitable for various applications, including conference rooms, classrooms, digital signage setups, and home theater systems that require extended DisplayPort signals.

Can I daisy-chain multiple GVE440 Extenders for longer distances?

Daisy-chaining multiple units might not be supported. It's generally recommended to use additional extenders for longer distances.

Is there any noticeable latency introduced by the GVE440 Extender?

The GVE440 is designed to minimize latency, but there may still be a slight delay due to signal transmission.

Is the GVE440 Extender compatible with both Mac and Windows computers?

Yes, the GVE440 is typically compatible with both Mac and Windows systems that have a DisplayPort output.

DOWNLOAD THE PDF LINK:IOGEAR GVE440 Display Port 4kHDBaseT-Lite Extender Quick Start Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals