HAISEN HB001VCR-1A Microwave Motion Sensor Instructions
- June 12, 2024
- HAISEN
Table of Contents
HAISEN HB001VCR-1A Microwave Motion Sensor
Product Information
- Product: Microwave Motion Sensor
- Model: HB001VCR-1A
- Manufacturer: Shenzhen Haisen Technology Co., Ltd
- Date: 2021.1.13
- Address: Building A6, Nanpu Science & Technology Park, Hao’si Shajing, Bao’an District, Shenzhen, P.R.C.
- Contact: TEL: +86-755-82598105, Email: info@haisensz.com
- Website: www.haisensz.com
Product Usage Instructions:
- On/off control: The microwave motion sensor automatically controls the on/off function based on motion detection.
- Daylight sensor: The sensor includes a daylight sensor that adjusts the control based on the ambient light level.
- DC input: The sensor operates on a DC input voltage range of 10.5-15V.
- 5-year warranty: The product is backed by a 5-year warranty.
Technical Data:
- Operating voltage: DC: 10.5-15V
- Operating current: 30mA
- Stand-by power: 0.5W
- Microwave frequency: Not specified
- Microwave power: Not specified
- Detection area: Not specified
- Hold time: Not specified
- Daylight threshold: Not specified
- Stand-by period: Not specified
- Stand-by dimming level: Not specified
- Mounting height: Not specified
- Detection range: Not specified
- Motion detection: Not specified
- Detection angle: Not specified
- Operating temperature: Not specified
- IP rating: Not specified
- Warranty: 5 years
- Function setting: Not specified
- Connection: Not specified
Note: Please refer to the complete user manual for detailed instructions on function settings, installation, and connection.
SHENZHEN HAISEN TECHNOLOGY CO., LTD
PRODUCT SPECIFICATION
-
PRODUCT MICROWAVE MOTION SENSOR
-
MODEL HB001VCR-1A
-
SCOPE OF APPLICATION
This specification is applicable to describe the function and use of the HB001VCR inductor of Shenzhen Haisen Technology Co., Ltd -
DATE 2021.1.13
APPROVED | CHECKED | APPROVAL |
---|---|---|
MICROWAVE MOTION SENSOR
- Model: HB001VCR
Featured
- Automatic On/off control with Daylight sensor.
- DC input
- 5-year warranty
Technical data
Input
| Operating voltage| DC:10.5-15V
---|---|---
Operating current| <30ma
Stand-by power| <0.5W
Output|
Control method
| On/off
0-10V diming
Sensor Parameters
| Microwave frequency| 5.8GHz±75MHz
Microwave power| <0.3mW
Detection area| DIP Switch : 50%/100%| Remote control : 25%/50%/75%/100%
Hold time| DIP Switch :5s/30s/1min10min| Remote control :
5s/30s/1min/3min/5min10min/20min/30min
Daylight threshold| DIP Switch :10Lux/30Lux/50Lux/Disable| Remote control :
2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable
Stand-by period| DIP Switch :0S/ 30S / 20min/+∞| Remote control :
0s/10s/30s/1min/ 5min/10min/ 30min/ 60min/+∞
Stand-by dimming level| DIP Switch : 10% 20% 30% 50% 100%| Remote control :
10% 20% 30% 50% 100%
Mounting height| Max. 4m (ceiling mounted)
Detection range| diameter 10m*4m(Max)
Motion detection| 0.5~+1m/s
Detection angle| 150°(Wall mounted) 360°(ceiling mounted)
Others
| Operating temperature| -20°C~+60°C
IP rating| IP20
Warranty| 5 years
Function setting| DIP Switch
Connection| Red 12V+ Black DIM- Yellow DIM+
Note
|
1. The result is based on 1.65M/60kg medium-size man walking towards with speed 0.8m/s in vacant room; The sensor hanging at 3M height.
2. It may have different performance if the test delivered by different people, with different speed, at different height or in different conditions.
Mechanical
(Unit: mm)
Size (Unit: mm)
Wiring diagram
Installation Method
Settings
-
Detection area
In this area, movement will be detected and able to trigger the sensor. 100% detection area is also known as the strong sensitvity. -
Hold-time
The period of light keeping 100% brightness after moving objects leave the detection area. -
Daylight threshold
Definition of the ambient brightness; only when the ambient brightness is lower than the preset specific lux amount, the sensor will work; when it’s preset as “disable”, the sensor works everytime it detects motion regardless the ambient brightness. -
Stand-by period
The period of light keeping low output before it’s completely switched off. When it’s preset as”∞“, the light always keep at low output if no movement in the detection area and doesn’t turn off. -
Stand-by dimming level
The definition of low output in the standby period.
Detection coverage
This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Application
Automatically ON/OFF function:
Light on when detecting movement and off after people leave at night.
Applications: Corridor, Staircase.
- With sufficient daylight, even when motion is detected, the light remains OFF.
- With insufficient daylight, when motion is detected, the light is ON.
- After the last detection and the present hold time elapsed, light OFF.
No daylight function
The daylight threshold is set to “Disable”.
Light on when detecting movement, After people leave, Light off after standby
period. Applications: Dim places such as Basement Parking, Underpass.
- When motion is detected, the sensor will switch on the light to 100% brightness.
- After people leave the detection area, the light remains 100% bright within the hold time.
- After the last detection and the present hold time elapsed, the light was OFF.
Function Demo – Dimmable control/Corridor function
- With sufficient daylight, even when motion is detected, the light remains OFF.
- With insufficient daylight, when motion is detected, the light is ON.
- After the last detection, the light will be dimmed down to the stand-by dimming level (10%,20%,30%, or 50%) after hold time.
- After the stand-by period, light OFF.
Attention
- Please read the instructions carefully before using this product and keep it well for all users to read at any time.
- The sensor should be installed by a qualified electrician and ensure the power is off before the installation.
- We reserve the right to modify any incorrect text, image, and necessary technical parameters.
- Any unauthorized modification is forbidden, otherwise, all guarantees will be immediately invalid.
Application Environment
- DRIPPING WARNING: This product shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the product.
- VENTILATION WARNING: The normal ventilation of the product shall not be impeded for the intended use.
- SAFETY VERIFICATION: This device is made and tested to meet the safety standards of the FCC, requirements, and compliance with the safety performance of the U.S. Department of Health and Human Services and also with FDA Radiation Performance Standards 21 CFR Subchapter.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
FCC STATEMENT
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized change or
modification is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
“FCC Radiation Exposure Statement:
- The device has been evaluated to meet general RF exposure requirements.
- The device can ben used in the portable exposure condition with restrictions”
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
- The device has been evaluated to meet general RF exposure requirements.
- The device can be used in portable exposure conditions without restriction.
Shenzhen Haisen Technology Co., Ltd., Tel: +86-755-82598105 丨Fax: +86-755-82598106丨Email: info@haisensz.com 丨www.haisensz.com.
References
- China Microwave Motion Sensor & BLE Motion Sensor factories
- China Microwave Motion Sensor & BLE Motion Sensor factories
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>