Red100 Lighting SLBC9A195 LED Lamp User Guide

Red100 Lighting SLBC9A195 LED Lamp

Warning

1. Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.

2. This device complies with part 15 of the FCC Rules. Operation is subject to the followingtwo conditions:
   (l) This device may not cause harmful interference. and
   (2) this devicemust accept any interference received. including interference that may cause undesiredoperation.

3. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

This product meets the applicable Industry Canada technical specifications.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.

Product features

1. App dimming and color matching
2. Energy saving and emission reduction, long service life
3. Stable performance, safety and reliability
4. Changeable colors, high-end atmosphere
5. Convenient installation and wide applicability

Installation steps

1. Cut off all the electronics components
2. Reconnect the circuit as indicated in the picture
3. Turn on the lamp holder
4. Screw the lamp into the lamp holder
5. The lamp is not suitable for discharge within 15cm

Precautions during use

1. Before use, determine whether the lamp is damaged or loose.
2. Pay attention to the power supply voltage before installing lamps
3. The light source of the product cannot be changed at will, and the structural parts and seals can not be disassembled

Download original steps:

1. Open the mobile app store and search for TUYA Smart. The above interface is displayed. and click “Install” button
   |
   ---|---
   
2. Click open or return to the desktop to open on the desktop

Dimming steps:

1. Connect the lamp to 120V voltage

2. The light starts to flash. turn on the mobile app, Click the plus sign in the upper right corner
   

3. Click auto discovery and start collection
   

4. Click next
   

5. Click the plus sign in the upper right corner of the device to be connected
   

6. After the distribution network is completed, it will automatically jump to the dimming interface. The color temperature between 2700-6500k can be called out in the upper circular area, and the brightness of the lower arc-shaped adjusting rod can be l % – l 00%.

7. Click the color light in the upper left corner to switch to the color light adjustment page. The color of the color light can be adjusted in the circular area above, and the brightness of the arc-shaped adjustment rod below can be 1 % – l 00%.
   

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>