Vive MOB1033 Upright Walker Owner’s Manual
- June 7, 2024
- Vive
Table of Contents
Vive MOB1033 Upright Walker
OVERVIEW
The Upright Walker allows for easier travel than traditional walkers. The 8 inch wheels and dual armrests with brakes make for a smoother, safer ride.
WHAT’S INCLUDED
1x Base
2x Arms combined with backrest
2x Front Wheels
2x Legs combined with hand brakes
4x Bolts
4x Female Star Locks
2x Tri-Grip Screws
2x Curved Washers
1x Bag
1x Cane Holder
UPRIGHT WALKER ASSEMBLY
For
video demonstration check out vhealth.link/y39
The Upright Walker requires assembly before use. Please follow the instructions below:
-
Identify the partially assembled base piece, unfold it, and ensure the seat is flat and locked into place
-
Attach the 2 front wheels to the seat base by inserting and secure the bolt. Insert from the inside all the way through the holes and securing the female star lock on the outside of the leg of the base.
-
Insert the 2 back legs. Push the push pin in and insert until the push pin depresses, locking in the hole.
-
Insert the tri-grip screw from the outside of the leg and screw in to better secure the leg. Repeat for the other leg.
-
Locate the 2 handles and insert them into the two front tubes of the legs of the walker.
-
Push the push pin in and move the arms down to the desired height
-
Insert the 2 hand grips into the designated slot within the arms
-
Choose the desired length by lining up the holes where you want the length to be and secure with the bolt, curved washer and female star lock.
-
Insert the cane holder container into the pin head on the base on the walker.
-
Use the Velcro straps to safely secure the break lines out of the way.
-
Hang your bag from its straps on the two tubes made for holding the bag.
FOLDING THE UPRIGHT WALKER
To fold the Upright Walker, simply pull up at the seat. To unfold the walker
for use, stretch the seat flat, and push down.
ADJUSTING THE HEIGHT OF THE HANDLES
There is a push button at each tube where the handle height can be adjusted up
or down by pressing the button and snapping into place when desired height is
reached.
OPERATING THE HAND BRAKES
Pull in on the hand brake to slow or stop the walker. To lock the walker in
position, push out on the hand brakes until they “click” and hold into the
outward position on their own.
SPECIFICATIONS
- Overall Width: 25″
- Overall Length: 32″
- Armrest Lowest Height: 41″
- Armrest Highest Height: 46″
- Seat Width: 17.5″
- Seat Depth: 9.5″
- Folded Width: 10.8″
- Shopping Bag Weight Capacity: 11 LBS
- Product Weight: 20 LBS
- Max User Weight: 300 LBS
WARNING
- Do not use strong corrosive cleaners to clean the product’s surface.
- Product should not be left outside in rainy conditions.
- Product may rust if regularly exposed to moisture.
- Before sitting down on the seat, please lock both brakes to prevent the walker from sliding.
- Do not hang any heavy weighted items on either of the armrests as it will cause the walker to be unstable.
- Please fold the walker before storage.
- This item is meant to be a walking aid. This means that it is not built to support the full weight of ones body, it is only meant to assist you while walking. If a large amount of force is placed on this item, even when brakes are in locked position, this can cause the item to move out of its position.
- Use caution when going over bumps.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>