HAISEN XS-HD06R Remote Control for Bi-Level Microwave Motion Sensor Owner’s Manual

HAISEN XS-HD06R Remote Control for Bi-Level Microwave Motion Sensor

Product Information

Specifications

• Model: XS-HD06R
• Mounting Height: M H
• Detection Range: Send
• Daylight Sensor: Included
• Stand-by Dimming: Yes
• Hold Time: Adjustable
• CCT: Variable
• Daylight Harvesting: Supported

Product Usage Instructions

Power On/Off

• To turn the device on or off, use the POWER button located on the control panel.

Auto Mode

• Enable the Auto mode to allow the device to automatically adjust settings based on environmental conditions.

Reset

• If needed, press the Reset button to restore the device to its default settings.

Scenes

• Select from different Scenes to customize lighting and sensor settings for specific scenarios.

Memory

• The device has memory functionality to store preferred settings for future use.

Apply Changes

• Press the Apply button after making adjustments to save the changes.

Mounting Height Adjustment

• Adjust the Mounting Height setting to optimize sensor performance based on installation height.

FAQ

• Q: How do I test the device’s functionality?
• A: Press the Test button to initiate a test mode where the device’s sensors and settings can be verified.
• Q: What are the electric parameters of the device?
• A: Refer to the Electric Parameters section in the user manual for detailed information on the device’s electrical specifications.

Model: XS-HD06R

Electric Parameters

• Working Voltage: AAA battery *2pcs (2.2-3V)
• Screen OFF Duration: 60S
• Icon Flicking Duration: 5S
• S(start) button ON Duration: 10S
• M(Memory) button Flicking Duration: 3S
• Carrier Frequency: 38KHz±2KHz
• Operation Distance Max: 15M/49ft (3V)
• Emission Angle: <30 degree
• Standby Current: <1.2uA
• Working Current: <5mA
• Peak Current: <30mA
• Working Temp: -4°F ~ +140°F
• Storage Temp: -22°F ~ +185°F

Dimensions

User LCD Screen Display

Briefing of Button Functions

perform the default program.
Function Programming Buttons
****| Scenes| Keep favorable programs (Detection area, hold time, daylight threshold, standby dim level, and standby period) into different scenes and apply them quickly.
| Start| Press this button to start programming, S icon on the LCD screen display starts to blink; after programming press the MEMORY button, S icon keeps being.
| Memory| Press this button to memorize the program and save it into SCENEs; after pressing it, M icon’s bright then off after 3S.
| Apply| Press this button to send the program(detection area, hold time, daylight threshold, standby dim level, and standby period) and the sensor works in SENSOR mode.
| Mounting Height| Adjust detection area/sensitivity levels according to real installation

situations, higher or lower.

| Send| Memorize and send out the last time setting of individual parameters(detection area,

hold time, standby dim level, standby period, daylight threshold, power, CCT, Daylight Harvesting, ON/OFF, Auto, Reset, Mounting Height, test)

****| Detection Area| Adjust from detection area options 25%，50%，75% and 100%.
| Daylight Threshold| Adjust from daylight threshold options, there are “—“(disable), 2lux, 10lux, 30lux,

50lux, 80lux, 120lux, 200lux, 250lux, 300lux, 350lux, 400lux, LEN(daylight learning).

| Standy Dim Level| Adjust from standby dim levels, 10%, 20%, 30% and 50%.
| Holdtime| Adjust from holdtime options: 5S, 30S, 1min, 3min, 5min, 10min, 20min and 30min.
| Standby Period| Adjust from Standby Period options, 0S, 10S, 30S, 1min, 5min, 10min, 30min, 60min and “–” as infinite.
| CCT Selectable| (To work with CCT-supported sensors)Adjust from CCT options, 2700K, 3500K, 4000K, 5000K, 5700K, 6500K.
****| Brightness

Adjustable

| Adjust brightness in both ON/OFF mode & SENSOR mode, minimum 10%, max 100%, each pressing makes 5% change.
****| Reserved Button| This remote control works for the next years, we keep this

reserved button for future reference.

| Daylight Harvesting| Daylight harvesting function enabled or disabled.
| Test Button| Quick testing button for only 2S ON then OFF.
| ****

| Choose higher parameters. Tips: 1. Press the POWER button then keep

pressing + button gets you directly to 100%

| ****

–

| Choose lower parameters. Tips: 1. Press the POWER button then keep pressing the – button to get you directly to 10%

Sensor & Intelligent Control

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>