ELINZ IPCAMONVIF Wi-Fi Security Camera User Guide
- June 12, 2024
- ELInZ
Table of Contents
ELINZ IPCAMONVIF Wi-Fi Security Camera
Product Information
The Wi-Fi Security Camera (SKU: IPCAMONVIF) is a high-quality security camera that allows you to monitor your surroundings remotely. It features a built-in micro SD card slot, supports 2.4 GHz Wi-Fi, and can be easily connected to your smartphone using the XMEye app. The camera offers a resolution of 1080p for clear and sharp video footage.
Package Contents:
- 1x Wi-Fi Security Camera 1080p
- 1x Antenna
- 1x SAA Power Adapter
- 1x Caps
- 1x Screw Set
MicroSD Card Installation:
- Make sure the security camera is turned OFF.
- Remove the two screws to access the micro SD card slot.
- Insert the MicroSD card into the card slot with its contact points facing downward.
- Tighten the screws to secure the micro SD card.
- Important : Always unplug the security camera before inserting or removing the MicroSD card. Use a genuine MicroSD card with a reading/writing speed of no less than U1/Class 10. The maximum supported capacity is 128 GB.
Downloading and Installing Mobile App:
- Scan the QR code provided to download the XMEye app from the App Store or Google Play Store.
- Install the app on your smartphone and grant all necessary authorizations for full functionality and alarm push notifications.
- After installation, sign up and register for a free account.
- Ensure that your smartphone is connected to the same Wi-Fi network that you want to connect your Wi-Fi camera to.
- Keep the camera and your smartphone nearby the router as this camera only supports 2.4 GHz Wi-Fi.
Turning the Device On:
The Wi-Fi Security Camera will automatically activate once the power cable
is inserted into the power input port. The camera will enter Wi-Fi and
initialization mode upon start-up.
Adding Camera to XMEye App:
- Open the XMEye App and tap on the + icon in the top right-hand corner.
- Select the Wi-Fi Config tab to enter the Wi-Fi configuration screen.
- Enter your Wi-Fi password and click OK to start searching for your camera.
- The app will search for nearby devices. When the green symbol appears, click on it.
- Click “Add” to finish adding your camera.
- Important: The camera’s serial number, domain name, and device ID will automatically show on the app. No need to enter them manually or scan a code. The default username is “admin” with a blank password and leave the port blank.
If you have any inquiries, issues, or comments regarding our products, please contact us using the information below:
- Email: [email protected]
- Phone: 1300 881 773
- Chat: Visit our website for live chat support.
Read this quick guide carefully before use, and retain it for future reference.
Product Instructions
Installing a MicroSD Card
The micro SD card slot is located inside the security camera. Please make sure
the camera is turned OFF. To access it, you need to remove two screws (Image
1), then insert the MicroSD card into the card slot with its contact points
facing downward (Image 2).
Important: Please unplug the security camera before inserting or removing
the MicroSD card. Please use a genuine MicroSD card manufactured by a
qualified supplier, with a reading/writing speed of no less than U1/Class 10.
(Maximum support capacity is 128 GB)
Downloading and Installing Mobile App
Scan the QR code below to download “XMEye” app in App Store or in Google Play
Store. When you install it, please allow all the authorizations if you want
full functions and alarm push notifications.
- After installing the app on your smartphone, you can sign up and register for a free account and start adding your Wi-Fi camera.
- Important : Before adding, please ensure that your smartphone is connected to the same Wi-Fi network that you want to connect your Wi-Fi camera to. This camera only supports 2.4 GHz Wi-Fi keep the camera and your smart phone nearby the router.
Turning the Device On
This Wi-Fi Security Camera will automatically activate once the power cable is
inserted into the power input port. Upon start-up, the camera will begin Wi-Fi
and initialization mode
Adding Camera to XMEye App
- Step 1. Open XMEye App then tap on the “+” icon in the top right hand corner.
- Step 2. Now select the “Wi-Fi Config” tab to enter the Wi-Fi configuration screen.
- Step 3. Fill in your Wi-Fi password then Click on “OK” and the app will start searching for your camera
- Step 4. The app will start looking for nearby devices like shown below.
- Step 5. When the green symbol appears, click on it.
- Step 6. Just click “Add” to finish adding your camera.
Important : The cameras serial number, domain name, and device id, all
details will automatically show on the app (No need to enter manually or to
scan a code).
The default username is admin and password is null; the default password is
blank and leave the port blank.
Package Contents
- 1x Wi-Fi Security Camera 1080p
- 1x Antenna
- 1x SAA Power Adapter
- 1x Caps
- 1x Screw Set
Specifications
- Resolution: 1920x1080P @ 25fps
- Chipset: XM530 + 2235P
- Sensor: 1/3″ CMOS Sensor
- Lens: 3.6mm
- IR LED: 18pcs IR LEDs
- Night Vision Distance: 10-30m
- Viewing Angle: 90°
- Video Encoding: H.265
- Two-Way Talk: Supported
- Cloud Storage: Support Optional
- Multi-User View: up to 4 users
- Motion Push Notification: Support
- Waterproof: IP66
- Compliance: ONVIF 2.4
- Network Protocol: HTTP, TCP, IP, ICMP, RTP, UDP, RTCP, SMTP, DHCP, DNS, PPPOE
- WiFi: Support WiFi 2.4Ghz 802.11b/g/n
- Mobile App: Xmeye
- Maximum Storage Support: MicroSD card (up to 128 GB)
- LAN: RJ45 10M/100M Ethernet port
- Power Supply: DC 12V 1A Working Temperature: -10°C ~ +55°C
For any inquires, issue or comments concerning our products, please send us an
email to the address below and we will respond as soon as possible.
Feel free to contact us at 1300 881 773, send us an email at
[email protected] or chat with us.