OdorStop 66315211 5 In 1 Air Purifier User Manual

OdorStop 66315211 5 In 1 Air Purifier

Congratulations

• Dear Customer,
  • Congratulations on your purchase of the Odor Stop OSAP5 5-in-1 HEPA Air Purifier.
  • This product is designed to provide years of trouble-free service.
  • It utilizes five proven technologies in order to provide users with the highest quality air possible.
  • Please read this guide carefully to familiarize yourself with all functions and features.
  • If you have any questions, please contact us by email or phone at: service@odorstop.com or 1 888-956-7468.

Caution

• Read the user guide carefully before use.
• Use only the original power adapter.
• Do not touch the electrical plug with wet hands.
• Disconnect the power supply before replacing the filter.
• Do not block or put any object inside the air inlet or outlet.
• Do not attempt to repair the air purifier.
• Keep the air purifier away from water, heat, and fire.
• Do not run the air purifier without the filter.

What It Does

• Removes Contaminants – H13 true HEPA filter captures 99.97% of dust mites and mould
• Reduces Asthma and Allergies – Doctor-recommended technology removes problem particles
• Fights Odors – Reduces odors from smoking, mold, pets and more
• Creates Clean Air – State-of-the-art technology is powerful, safe, and energy-efficient

How the OSAP5 Purifies the Air

1. High Efficiency Pre-Filter: This filters out larger particles and dust before it enter the unit.
2. H13 True HEPA Filter: This filters out harmful contaminants to a level of 0.3 microns. This includes filtering dust mites, viruses, bacteria, and even mould spores.
3. Activated Carbon Filter: This filter uses a bed of activated carbon to remove contaminants and impurities.
4. UV Light: UV is a proven technology to reduce mould, bacteria, and viruses.
5. Tioz Photocatalytic Filter: This creates a process called photocatalytic oxidation (PCO). PCO is an advanced process by which volatile organic compounds (VOCs), bacteria, mould, and fungi are destroyed by incorporating photon and UV energy, activating a chemical reaction “oxidizing” (or destroying) the pollutant.

Overview

OSAP5 Overview

Filter Overview

• Place the unit upside down on a soft surface.
• Insert the filter by turning clockwise to secure.
• Remove the filter by turning filter counter-clockwise.

Getting Started

1. Turn purifier upside down on a flat, soft surface.
2. Rotate the base cover left and remove the filter.
3. Take plastic wrap off the filter, re-install the filter and secure by turning to the right.
4. Attach power adapter to the corresponding power inlet port on the back of the purifier.
5. Plug power adapter into a 110-120V grounded outlet.
6. Turn master switch to “on” position. The master switch is located on the back of the purifier above the power adapter inlet.
7. Push power button on and the purifier will turn on in “Auto” mode. It will automatically adjust to existing air quality.

Control Panel Overview

1. Power
2. Fan Speed Display
3. Filter Life
4. Filter Life/Timer Display
5. Timer
6. Light
7. Auto Mode
8. Lock
9. Sleep
10. Fan Speed
11. UV Lamp
12. Air Quality Display

Functions

1. Power Button
   • Press and purifier will start in “Auto” mode.
2. Fan Speed Display
   • Displays the fan speed from 1 (low) to 5 (high).
3. Filter Button –
   • Press and % of filter life remaining is displayed and LED light below “% Filter Remaining” will illuminate. This light will blink when the filter needs to be replaced. After replacing the filter, hold the “Filter Button” down for 5 seconds to reset.
4. Filter/Timer Display
   • Displays the filter life/timer setting. The corresponding LED indicates which function is displayed.
5. Timer Button
   • Press and timer is activated and LED light below “Hours Remaining” will illuminate. Each press will increase the length of time the purifier will run in 1/2 hour increments up to 24 hours. The purifier will shut off after the set time.
6. Light Button
   • Press and all lights will turn off/on.
7. Auto Mode Button
   • Press and purifier will automatically optimize functions based on air quality.
8. Lock Button
   • Press and hold for three seconds to turn the lock ON. With the lock on, a rapid beeping sound will occur when any button is pressed. Press and hold for three seconds to turn the lock OFF.
9. Sleep Button
   • Press and purifier will run on the lowest fan speed.
10. Fan Speed Button
    • Press to adjust fan speed from 1 (low) to 5 (high).
11. UV Lamp Button
    • Press and UV lamp will turn on/off.
12. Air Quality Display/Light Ring
    • Displays the air quality. The lower the number, the cleaner the air.

The light ring around the control panel changes color as follows:

• Good: Blue (<75),
• Moderate: Yellow (76-115),
• Polluted: Purple (116- 150),
• Bad: Red (>151). The Particle Matter (PM) 2.5 sensor measures air quality after the purifier has been running for 30 seconds. This should not be used as a professional indoor air quality instrument.

This User Guide is available to download from odorstop.com: www.odorstop.com/content/user- guides/OSAP5-User-Guide.pdf.

Maintenance

• Warning! Disconnect the power cord before attempting maintenance.
• The OSAP5 is designed to provide years of trouble-free service. There are a few things that can be done to make sure your purifier is operating at optimum performance.

HEPA FILTER

• Change or clean when the filter replacement light blinks or whenever the filter is degraded by build-up or damage.
• The filter may be vacuumed with a soft bristle tip to remove build-up.
• Warning: filter may damage easily.
• The life expectancy of the filter varies based on conditions of use, but it is recommended that it be changed every 6 months if the purifier is used daily.

CLEANING PURIFIER

• As needed, clean the purifier with a dust rag, damp cloth, or soft bristle tip of the vacuum to remove any build-up of debris.
• Removing the filter is recommended to clean the inside of the unit. Do not use any chemicals to clean the purifier.

PM 2.5 SENSOR

• Clean at least monthly if the purifier is used daily.
• Open the PM 2.5 sensor access door in the back of the purifier by using a coin or a large tip flathead screwdriver to gently pry the bottom of the door away from the unit.
• Use a dry cotton swab to clean any debris from the sensor by inserting the swab and twisting it.
• Do not use any detergents, chemicals, or liquids to clean the sensor.
• Be careful to reinstall the foam filter when resecuring the door.

Troubleshooting

For all other concerns or questions please contact customer service: service@odorstop.com or 1 888-956-7468.

Specifications

• Model OSAP5
• Power Supply 120V / DC24V – 18W
• CADR 160 m3/hr
• Noise Level Max 54 dB(A), Min < 22 dB(A)
• Weight 4 Pounds

Warranty

• Odour Stop warrants to the original purchaser that this purifier is free from any defect in materials and workmanship for three (3) years from the date of purchase.
• Odour Stop will replace or repair the unit without charge to the customer.
• To obtain warranty service please return the purifier in a suitable package to: OdorStop Customer Service at 5139 Southwestern Blvd. Hamburg, NY 14075

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>