COMMSCOPE WB-TK24D Trapeze Kit Instructions
- June 12, 2024
- CommScope
Table of Contents
WB-TK24D
Trapeze Kit, 24 in wide, two rungs
Instructions
Product Classification
| Product Type | Trapeze kit |
|---|
General Specifications
| Application | Waveguide bridge kit, 24 in |
|---|---|
| Cable Runs, quantity | 28 |
| Hole, quantity | 24 |
| Mounting | Waveguide bridge channel |
| Rungs, quantity | 1 |
Dimensions
Height| 101.6 mm | 4 in
---|---
Width| 609.6 mm | 24 in
Length| 152.4 mm | 6 in
Hole Size| 3/4 in | 7/16 in
Outline Drawing
Material Specifications
| Material Type | Hot dip galvanized steel |
|---|
Packaging and Weights
Included| Hardware | Threaded rod | Z-bracket
---|---
Packaging quantity| 1
Weight, net| 5.9 kg | 13.007 lb
Regulatory Compliance/Certifications
| Agency | Classification |
|---|---|
| CHINA-ROHS | Below maximum concentration value |
| ISO 9001:2015 | Designed, manufactured and/or distributed under this quality |
management system
REACH-SVHC| Compliant as per SVHC revision on
www.commscope.com/ProductCompliance
ROHS| Compliant
Included Products
ZB-H8 – Horizontal Z-bracket, 23 in, for 14 coaxial cable runs
©2023 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 19, 2023
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>