vivitek DX4630Z Laser Projector User Guide
- June 12, 2024
- vivitek
Table of Contents
DX4630Z / DW4650Z / DH4661Z / DU4671Z / DU4771Z
DX4730Z / RU43723 / DU4871Z Series
Quick Start Guide
DX4630Z Laser Projector
- Connect AC Power
- Connect Input HD Device(s) To The Projector
- Power On (In Order)
- Position Projector
- Adjust Zoom and Focus
- Run Presentation
| Item | KEY | Description |
|---|---|---|
| 1. | IR transmitter | Transmits signals to projector. |
| 2. | Laser | Press to operate the on-screen pointer. DO NOT POINT IN EYES. |
| 3. | Power ON | Turns the projector on. |
| 4. | Power OFF | Turns the projector off. |
| 5. | HDMI | Displays the HDMI1/2 and DVI source selection (toggle) |
| 6. | PC | Displays the VGA1NGA2/PC source selection (toggle). |
| 7. | Video / S-Video | Displays the VIDEO/S-VIDEO source selection. |
| 8. | USB | Displays the USB source selection. |
| 9. | HDBaseT | Displays the HDBaseT source selection. |
| 10. | Network | Displays the Network source selection. |
| 11. | MENU | Opens the OSD. |
| 12. | Navigates and changes settings in the OSD. |
Quick Menu – For Vertical Keystone +.
13.| EXIT| Return to last OSD page.
14.| | Play the previous item on the programming list for MHL.
15.| ENTER| Enters and confirms settings in the OSD.
16,| | Navigates and changes settings in the OSD.
Quick Menu – For Horizontal Keystone.
17.| Keystone| Opens the Keystone menu.
18.| | Navigates and changes settings in the OSD.
Quick Menu – For Vertical Keystone.
19.| MHL| Enable the Mobile High-Definition Link technology feature for smart
devices.
20.| Laser| Use as on-screen pointer. DO NOT POINT IN EYES.
21.| | Reverse in set increments for MHL.
22.| | Play or pause video/music for MHL.
23.| | Forward in set increments for MHL.
24.| | Navigates and changes settings in the OSD.
Quick Menu – For Horizontal Keystone.
25.| | Stop video/music playing for MHL.
26.| | Play the following item on the programming list for MHL.
27.| Source| Alternate input source.
28.| Auto| Auto adjustment for frequency, phase, and position.
29.| Volume| Displays the Volume setting bar.
30.| Brightness| Displays the brightness setting bar.
31.| Contrast| Displays the Contrast settings bar.
32.| Mute| Mutes the built-in speaker.
33.| Lamp| Displays the lamp selections.
34.| Zoom| Displays the digital zoom settings bar.
35.| 3D| Enable 3D feature.
36.| Freeze| Freezes/unfreezes the on-screen picture.
37.| Blank| Makes the screen blank.
38.| Status| Opens the OSD Status menu (the menu only opens when an input
device is detected).
39.| Wired jack| Connect wire remote to the projector.
- Note: Please download the latest user’s Manual from Vivitek local website.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>