Lepro 33000233 LED Work Light User Manual
- June 12, 2024
- Lepro
Table of Contents
Lepro 33000233 LED Work Light
Product Information
- The LED Work Light is a multi-functional work light with 2 built-in lithium-ion batteries. It has a compact design and is equipped with a bracket for easy mounting. The light features a power switch, micro USB charging input, USB charging output, battery status LEDs, and a USB cover. The maximum input and output voltage/current is DC 5V/1A. The light source of this luminaire is not replaceable.
- The product is manufactured by LEPRO INNOVATION INC and distributed by Le Ming Trading Inc. It complies with part 15 of the FCC Rules and is certified with CAN ICES-005 (B) / NMB-005 (B) standards. The product can be purchased in the USA, Canada, and the United Kingdom.
- The product dimensions are approximately 122mm (4.80in) in length and 162mm (6.38in) in height. It weighs approximately 2200mAh and is powered by 2 lithium batteries. The batteries are rechargeable and should not be exposed to extreme temperatures. The product should not be modified or disassembled.
Product Usage Instructions
- Before usage, carefully check the product for any damage or defects.
- To turn on/off the light and choose lighting modes, press the power switch.
- The bracket of the work light is 180 degrees rotatable for flexible positioning.
- The work light can be charged using the included micro USB cable. Please ensure that the charging cable is connected to a compatible adapter (not included).
- When charging external devices using the work light’s USB output, make sure to use an adapter with the same specifications (DC 5V/1A).
- Avoid letting the batteries fully discharge and overcharging to maintain their good condition.
- If the batteries need replacement, it should be done by a professional. Dispose of the old batteries properly.
- The light source of the luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire should be replaced.
- If the product has not been used for more than 12 months, it is recommended to stop using it to avoid safety hazards.
- For safety during charging, use only adapters that have passed CE/PSE/UL/ETL certifications.
CAN ICES-005 (B) / NMB-005 (B)c
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
LEPRO INNOVATION INC
3651 Lindell Road Suite D1048, Las Vegas, NV 89103, USA
www.lepro.com +1
866-287-2558
cs@lepro.com
Le Ming Trading Inc.
801-6081 No. 3 Rd. Richmond, BC, V6Y 2B2, CA
www.lepro.ca +1
833-433-1453
cs@lepro.ca
Manufacturer
LE Innovation Limited
One Spencer Dock, North Wall Quay, Dublin 1, D01 X9R7, Ireland
www.lepro.de +49
800-723-6202
cs@lepro.de
Made in China Fabriqué en Chine Hergestellt in China
UK Importer:
Lighting EVER Ltd.
93 Addy House, Rotherhithe New Road, London, SE16 2PD, United Kingdom
www.lepro.co.uk +44
800-802-1244
cs@lepro.co.uk
DESCRIPTION
- Bracket
- Power Switch
- Micro USB Charging Input
- USB Charging Output
- Battery Status LEDs
- USB Cover
DIMENSION
10 W / 6000 K / IP44 / -25 °C ~ 40 °C / -13 °F ~ 104 °F
2200 mAh Lithium x 2
Built-in Battery
This product contains rechargeable batteries which should not be exposed to extreme temperatures. Do not attempt to modify or to disassemble the product
DISPOSAL
This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste, but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment
Notes
- This product is a multi-functional work light with 2 built-in lithium-ion batteries which can be charged by a micro USB cable (the USB charging cable is included, the adaptor is not included).
- Please check the product carefully prior to usage.
- Press the switch to turn on/off the light and to choose the lighting modes.
- The max input and output voltage/current is DC 5V/1A, please choose a proper adaptor and charge external devices using the same specifications.
- The bracket is 180 degree rotatable.
- Do not let the battery fully discharge and avoid overcharging in order to keep the battery in good condition.
- The batteries can be only replaced by a professional and should be disposed of properly.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- Avoid using and charging in environments above 40°C.
- If not in use for an extended period of time, fully charge first. Charge at least once every 3 months. If it has not been charged for more than 12 months, please stop using it to avoid safety hazards.
- For your safety, when using an adapter to charge, please follow the rules: Only adapters that have passed CE/PSE/UL/ETL safety certification and with the specified output voltage and current can charge our products. Please do not continue charging after it shows it is 100% fully charged.
References
- Lepro - AI Generated Lighting, Smart LED Bulbs, AI Smart Lights, LED Lighting Fixtures, Smart LED Strip Lights, LED High Bay Lights
- Lepro® - Lighting EVER - Indoor/Outdoor LED Bulbs, LED Lights, Light Fittings, LED Lamps, LED Light Fixtures
- Lepro - AI Generated Lighting, LED AI Smart Lighting, LED Lights, Smart LED Bulbs, Smart LED Strip Lights, High Bay LED Lights, LED Shop Lights
- LED Lampen, LED Beleuchtung, Außenbeleuchtung - LE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>