TELLUR 597125 Knob-Lever Keyed Entry Bed and Bath Hall and Closet Instruction Manual

TELLUR 597125 Knob-Lever Keyed Entry Bed and Bath Hall and Closet Instruction Manual

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

PREPARATION

Before beginning installation of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. ESTIMATED ASSEMBLY TIME: 40 – 60 MINUTES

PACKAGE CONTENTS

• **Latch

**

• **Strike Plate

**

• Outside Knob or Lever Assembly
  
  

• Inside Knob or Lever Assembly
  
  

• Keys (Only Included With Entry Knob/Lever)
  

• **Lever Removal Tool (Only Included With Levers)

**

• **Latch/Strike Screws

3/4 in. (19 mm) Qty. 4 / Cant. 4
**

• **Mounting Screws for Knob/Lever

15/16 in. (24 mm) Qty 2. / Cant. 2
**

TOOLS NEEDED (NOT INCLUDED)

• Phillips Screwdriver
  

• Tape Measure
  

PREPARE DOOR AND CHECK DIMENSIONS

For drilling refer to production template below.

INSTALL LATCH

a. Install the latch so that the slant of bolt faces in direction that the door closes.

b. Secure the latch with the supplied screws.

IMPORTANT: BEFORE INSTALLING KNOBS / LEVERS, ADJUST THE LATCH (IF NEEDED)

Adjustable latch

Look in the door hole. If the square hole in the latch is centered in the door hole, no adjustment is required. Proceed to step 3. If the square hole is not centered, adjust the latch. See “Latch Adjustment.”

Latch Adjustment (only if needed):

Universal latch

Measure the backset of the hole to determine the square spindle loading location you should use.

TEMPLATE

Fold on dotted line and fit on door edge.

Mark 1 in. (25.4 mm) hole at center of door edge.

INSTALL KNOBS (LEVERS: SKIP TO STEP 4

a. Install the outside knob. Insert the spindle through the square hole in the latch

b. Install the inside knob and tighten the screws

INSTALL LEVERS

a. Install the outside lever. Insert the spindle through the square hole in the latch.
The lever handle faces away from the door edge

OPTIONAL: LEVER FLIP

b. Optional: If you wish to flip the lever handle for a different look, temporarily remove the outside lever from the door. Remove both lever handles from the lever bases, and swap the inside and outside lever handles. Reinstall the outside lever when finished.

Insert the lever removal tool into the hole in the side of the lever, and pull the lever handle to remove it.

Entry levers only: Make sure the outside lever is unlocked.

Make sure lever clicks into place. Pull to test for secure fit.

c. Install the inside lever and tighten the screws.

INSTALL STRIKE

Install the strike on the door frame and tighten the screws.

Replacement Parts List & Troubleshooting

For replacement parts & troubleshooting, call customer service at 1-800-433-4047, 8:00 a.m. – 5:00 p.m., EST, Monday – Friday.

CARE AND MAINTENANCE

THE FOLLOWING CARE INSTRUCTIONS SHOULD BE FOLLOWED TO ENSURE A LONG LASTING FINISH:

Limited Lifetime Warranty

The Manufacturer extends a Limited Lifetime Mechanical and Finish Warranty to the original “User” of this Product against defects in materials and workmanship as long as the User occupies the residential premises upon which the Product was originally installed. Upon return of a defective Product to the Manufacturer, the Manufacturer shall either replace, repair or refund the purchase price in exchange for the Product. This warranty does not cover abused or misused Products or those Products used in commercial applications. No other warranties, express or implied are made with respect to the Product including but not limited to any implied warranty of merchantability or fitness for a particular purpose. The Manufacturer DOES NOT authorize any person to create for it any obligation or liability in connection with the Product. The Manufacturer maximum liability hereunder limited to the purchase price of the Product, and in no event shall the company be liable for any consequential, indirect, incidental or special damages of any nature arising from the sale or use of this Product, whether in contract, tort, strict liability or otherwise. (For warranty service, please call 1-800-433-4047, 8:00 a.m. – 5:00 p.m. EST, Monday through Friday).

Note: Should the Product be considered a consumer product it may be covered by the Magnusson Moss Federal Warranty Act, please be advised that: (1) Some states do not allow limitations or incidental consequential damages on how long an implied warranty lasts so that the above limitations may not fully apply: and (2) This warranty gives specific legal rights and a User may have other rights which may vary from state to state.

Questions

Call customer service at 1-800-433-4047,
8:00 a.m. – 5:00 p.m., EST, Monday – Friday.

References

• EDGE Studios

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>