Zhongrui ZRS1 Low Power Battery Camera User Manual
- June 16, 2024
- Zhongrui
Table of Contents
V1.2
Quality . Service . Competitiveness
Fast Installation Manual
Before operating this unit, please read these instructions carefully, and save them for future use.
Interface description
This manual is suitable for various types of cameras.
(The appearance may be different due to different batches. The details are
subject to the receipt. This manual is only for the installation instructions
of this series of equipment.)
Description
-
Reset button
The working state of the device, long press 3-5 seconds to restore the factory, the camera will have a voice prompt broadcast. -
SD card slot
TF card, storage video and playback video. -
DC power supply
Power input
Software Installation
APP Download and Installation
Users can search “EseeCloud” on APP store or “IP PRO” on Google Play,or scan
the QR code below to install the APP.
| EseeCloud APP | APP download |
|---|
Note: For iOS system, it requires iOS 9.0 version or above.
For Android, Android 5.0 or above.
Account login
Account login: On the login interface, enter the account/ phone number/email,
and the corresponding password, and click the “OK” button to log in.
Third-party login: APP supports third-party login. Click the third-party
social software icon, jump to the APP to complete the authorization and log
in.
Wifi Configuration add process
Add WIFI mode (optional)
-
Power on the device, wait for the indicator light to flash slowly, connect to the IPCXXX hotspot in the phone settings, the password is 11111111;
-
Open the APP and click on the “+” in the upper right corner to enter the scan code interface;
-
Scan the QR code on the device ;
-
On the search device interface, click “Add”;
-
To view and use via WiFi or other networks, please select Remote View; If there is no network, if you connect to the camera at close range, please select local Direct Connection;
Remote View adding process
-
Select “Remote View” to add, connect the device to WiFi, select the correct WiFi, enter the password, and click Confirm;
-
Please wait patiently during the device configuration network;
-
The device is successfully added, please set a name and password for the device.
Direct Connection adding process
- Select “Direct Connection” to add, and set the name and password for the device to add successfully;
Note: The Direct Connection needs to be connected to the device hotspot to preview the device screen normally.
When the QR code of the device cannot be found (or the scan code is unsuccessful)
-
Connect to the IPCXXX hotspot in the phone settings, the password is 11111111;
-
Click “Other ways to add” on the scan code interface;
-
Select the wireless standalone camera, and the subsequent adding process is the same as the process of steps “Remote View ” and ” Direct Connection “;
Wired add configuration process
Adding method 1:
-
Power on the device, connect it to a router with internet access with a network cable, scan the QR code of the device, and click “Add”;
-
After setting the name and password for the device, it can be added successfully.
Adding method 2:
-
Select “Add by ID/IP” in “Other ways to add”;
-
Enter the device IDand password, and click Finish in the upper right corner to add successfully.
Adding method 3:
-
When the mobile phone and the device are on the same network, select LAN scan in “Other ways to add”;
-
After searching for the device, click Add, enter the device password to complete the addition.
Warning
In case of fire or lightning, pls don’t put product in damp and raining place,
operate or maintain according to the user manual.
Be careful when you see attachment with a Dangerous Voltage which might cause
serious electric accident.
Warning To reduce electric shock, unprofessional people please don’t open
product front panel or rear panel
Warning In case of electric shock and fire, pls don’t use power supply
beyond power list in user manual
Notice:
- Ensure your equity, pls read the user manual carefully before you use the product
- Pls contact professional people if you need install and maintain the product
- Working Environment: temperature of -20°C~+60°C, relative humidity under 85%
- Pls don’t exceed the user manual’s standard range of temperature, humidity and voltage.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>