VIMAR 02079 Interfaccia ethernet/RS485 Instruction Manual
- June 12, 2024
- VIMAR
Table of Contents
VIMAR 02079 Interfaccia ethernet/RS485 Instruction Manual
Ethernet/RS485 interface, installation on DIN rail (60715 TH35), occupies 9
modules size 17.5 mm.
The device performs the transfer of data from an RS-485 line to the Ethernet
network.
FEATURES
- Rated supply voltage: 12-24 V d.c. ± 10%.
- Absorption: 200 mA.
- Max terminal cable section: 2,5 mm2
- Operating temperature: +5 °C – +40 °C (indoor).
- Relative humidity during operation: max. 90%
- Occupies 9 modules size 17.5 mm.
CONNECTIONS.
See figure below.
N.B.: In order to install 2 or more interfaces 02079, contact Customer
Support.
INSTALLATION RULES.
Installation should be carried out in compliance with the current regulations regarding the installation of electrical systems in the country where the products are installed.
REGULATORY COMPLIANCE.
EMC directive. Standards EN 60950-1, EN 61000-6-1, EN 61000-6-3.
REACH (EU) Regulation no. 1907/2006 – Art.33. The product may contain traces
of lead.
WEEE – User information
The crossed bin symbol on the appliance or on its packaging indicates that the
product at the end of its life must be collected separately from other waste.
The user must therefore hand the equipment at the end of its life cycle over
to the appropriate municipal centres for the differentiated collection of
electrical and electronic waste. As an alternative to independent management,
you can deliver the equipment you want to dispose of free of charge to the
distributor when purchasing a new appliance of an equivalent type. You can
also deliver electronic products to be disposed of that are smaller than 25 cm
for free, with no obligation to purchase, to electronics distributors with a
sales area of at least 400 m2. Proper sorted waste collection for subsequent
recycling, processing and environmentally conscious disposal of the old
equipment helps to prevent any possible negative reusing and/or recycling
materials used in manufacture.
FRONT VIEW.
Connections
- 1 vertical 8-pole female flying terminal. Step 5.08 – max sect. 2,5 mm2
- 1 RJ45 connector for connection to Ethernet.
- 1 vertical 4-pole female flying terminal – Step 5.08 – max sect. 2,5 mm2
CONNECTIONS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>