Swann SWIFI-4KXTRM-GL 4K Wire Free Security Camera User Guide

Swann SWIFI-4KXTRM-GL 4K Wire Free Security Camera

CAMERA OVERVIEW

• Set (mini) button
• Reset button
• MicroSD card slot
• 32GB card pre-installed,
• Max. 128GB card supported

Note: Keep the top and bottom rubber covers closed when not in use to prevent water and dust from entering.

GET STARTED

Charging the camera

Before using the camera for the first time, fully charge it with the included USB-C charging cable.

1. Open the rubber cover on the bottom of the camera to access the camera’s USB-C charging port.
2. Insert the smaller end of the USB-C charging cable into the camera’s USB-C charging port and the larger end into a USB wall charger, such as the USB power adapter that came with your smartphone.
3. The LED indicator on the front of the camera turns solid blue while charging and turns off once the camera is fully charged. Actual charging times may vary depending on the USB power supply and the remaining battery level. A full charge may take up to 11 hours due to the camera’s large battery capacity.
4. Make sure to unplug the USB-C charging cable from the camera and close the rubber cover tightly after charging is done to keep out water and dust.

DOWNLOAD THE SWANN SECURITY APP

1. Download the latest version of the Swann Security app from the Google Play™ Store or Apple App Store® on your Android or iOS mobile device. Simply search for “Swann Security”. Or, you can scan the QR code below to get the app.
2. Open the app and create your Swann Security account by tapping “Not yet registered? Sign Up” at the bottom of the screen. Then, activate your Swann Security account by confirming the verification email sent to your registered email address.

SET UP THE CAMERA

• Launch the Swann Security app and sign in. Tap the Pair Device button on the screen (or tap the menu icon in the top left and select Pair Device). The app will now guide you through the pairing process to set up the camera with your Wi-Fi network.
• Please note that the camera is only compatible with the 2.4GHz network. If your router is using the 5GHz band, ensure that it is operating in mixed mode.

CAMERA PLACEMENT

• The camera can be conveniently placed on a table or shelf, or mounted on a flat surface using the provided stand. Because the camera is completely wire-free, you’ll have a lot of flexibility on where you can install it.
• Select a location with strong, reliable Wi-Fi reception to ensure best video streaming and battery performance. You can easily check this using your smartphone. Connect your smartphone to the Wi-Fi network in the chosen spot and check if you have at least 2 bars of Wi-Fi signal.
• As a general rule, placing the camera closer to your router will result in better wireless connection quality. If you’re finding the Wi-Fi signal to be weak or out of range, consider installing a Wi-Fi range extender to boost the Wi-Fi coverage of your existing network.

Installing the stand (Recommended installation height > 2m)

1. Remove mounting plate from the stand by rotating counterclockwise.
   • If mounting to a wooden surface, screw mounting plate directly to the surface.
   • If mounting to a masonry surface (brick, concrete), mark and drill holes, insert wall plugs, and screw mounting plate to the surface.
2. Reattach the stand to mounting plate by rotating clockwise until secure.

Attaching the camera to the stand Screw the camera to the stud on the stand, point the camera in the desired direction, and then turn the locking knob counterclockwise until it is tight enough to secure the camera in position.

HELP AND RESOURCES

Optimizing motion detection
The camera’s PIR motion sensor detects heat signatures of moving objects. You’ll generally get good detection results by pointing the camera downwards at an angle where people will be moving across the coverage area before heading directly towards the camera. You can turn motion detection on or off, as well as adjust the motion detection sensitivity in the Swann Security app.

Camera LED indicator guide

update in progress
Slow Blinking Blue| Wi-Fi Pairing mode|

Rebooting the camera
On rare occasions, it might be necessary to reboot the camera if it becomes unresponsive. A simple reboot can also quickly fix connectivity issues. To do this, use a paper clip to press and release the Reset button. This will power off the camera. Then, briefly press the SET button for 1 second to boot up the camera.

Swann Security app manual
To learn more about using the Swann Security app, you can download the manual from the App Menu > User Manual, or scan the QR code for your mobile device on the right. The manual provides detailed information on how to view live camera video, use 2-way talk, playback and download motion recordings, and configure various camera settings, including light duration, motion detection sensitivity, modes, and more.

• Input rating: 5VDC, 2A,Max.10W, Operating temperature: –10°C-40°C,
• Built-in battery information: Model J838C, Capacity: 3.6V, 13400mAh, 48.24Wh, Altitude during operation: ≤ 2000 m
• Frequency: 2412MHz-2472MHz, Maximum radio-frequency power: <=20dBm

FCC STATEMENT

This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons.
WARNING: Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment.

IC STATEMENT

• This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
• The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance.
• This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

UK DECLARATION OF CONFORMITY

• Hereby, Swann Communications declares that this product is in compliance with the requirements for UKCA marking. The
• Declaration of Conformity can be obtained at uk.swann.com/compliance.

RECYCLING

This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give their product to a competent recycling organization or to the retailer when they buy a new electrical or electronic equipment.

BUILT-IN BATTERY CAUTION

• Do not leave in an extremely low air pressure environment

• Do not leave in an extremely high-temperature environment

• Do not attempt to replace the battery or disassemble the product. There are no user-serviceable parts inside. Doing so will void the warranty and can result in a safety hazard The symbol indicates DC voltage

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person

• Luminaires delivered without control gear, the control gear shall be SELV/PELV

• SUPPORT.SWANN.COM

• FAQs & Help Articles

• Manuals, Guides & Videos

• Technical Support

• Community Forums

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>