PXN Ravine Pro Wireless Noise Canceling Gaming Headset User Manual
- June 12, 2024
- PXN
Table of Contents
Ravine Pro Wireless Noise Canceling Gaming Headset
User Manual
Wireless Noise Canceling
Gaming Headset
Thank you for choosing and supporiing PXN, please read tis manual carefully before starting to enjoy your gaming experience.
Product Overview
Headset
USB transceiver
Power ON/OFF
Headset Charging
Hold and press the ”
power button” for about 3 seconds to turn it on, the blue light will turn on
for 2 seconds and then start flashing.
Hold and press the’ power button” for about 5 seconds to turn it off, the blue
light will turn on for 2 seconds and then turn off.
BT Connection
For the first time
using, the headset will automatically enter pairing mode and you will hear the
prompt “Pairing” after turning it on. Then, check your BT pairing list on the
phone to find “Ravine Pro” and connect to it. Once connected, you will hear
the prompt “Connected” and the blueindicator will flash every 10 seconds.
2.4G Connection
After plug the transceiver
into your PC, console, or mobile device, the headset will automatically
connect after turning it on. When the headset are connected, you will hear the
prompt ‘Connected” and the transceiver’s blue light will remain on. The blue
indicator light on the headset will flash every 10 seconds.
Forced Pairing
If you need to connect the
headset to another device after using them with one device for more than 5
minutes, press and hold the up arrow button for 2 seconds to enter forced
pairing mode. The blue indicator light on the headset will flash every 0.5
seconds.
Button Functions
| Main Control Functions | Button Functions | Gusture |
|---|---|---|
| Power ON | Press and hold the power button when the headset is under OFF state | |
| Power OFF | Press and hold the power button when the headset is under ON state | |
| Play/Pause | Press the power button once | |
| Answer/Hang up calls | Press the power button once | |
| Reject calls | Hold and press the power button | |
| Previous track | Press the up arrow button once | |
| Next track | Press the down arrow button once |
Volume up/down
Music mode (green light) Game mode (blue light) Movie mode (ice blue light)|
Moving the volume knob upwards increases the volume
Moving the volume knob downwards decreases the volume|
Double-click the down arrow button to switch to another sound effect
You will hear a prompt when the sound effect has been changed|
ANC mode
Transparent mode Normal mode| Double-click the up arrow button to switch to
another working mode
You will hear a prompt when the mode has been changed|
Microphone on/off| Pull down to open/Pull back to dose You will hear a prompt
when it switches on and off|
Forced pairing| Hold and press the up snow button You will hear a prompt|
LED light on/off| To turn off the light, press and hold the down arrow key
To turn on the light, press and hold the down arrow key once more|
How to wear
Product Specifications
| Product Name | Ravine Pro |
|---|---|
| BT Version | BT 5.3 |
| BT Protocol | A2DPAVRCP HFP HSP |
| Audio Decoding | SBC. MC |
| Driver | 40mm composite diaphragm speaker |
| Frequency Response | 20Hz-20KHz |
| Sensitivity | 94dB |
| Effective Range | 210m |
| Battery Type | Lithium battery |
| Battery Capacity | 800mAh |
| Input Voltage | 5V/600mA |
| Charging Interface | type-C |
| Charging Time | 1.5 H |
| Battery Life | BT mode: about 47 hours (with lights oft), |
about 35 hours (with lights on)
2.4G mode: about 42 hours (with lights off), about 32 hours (with lights on)
Attentions
Avoid using the headphone at a high volume for a long time. If tinnitus or
earache occurs, please stop using. Do not use this product while driving a
motor vehicle. Avoid using this product during thunderstorms or rainy weather
to prevent potential product malfunctions or electrical hazards. Keep this
product out of reach of children and pets to prevent accidental swallowing and
potential choking hazards
Warning: The rechargeable battery of this product must be properly
handled for recycling purposes. Do not dispose of the battery in a fire, as It
may cause an explosion.
Suggestion: It is recommended to fully charge the product once a month to
maintain the battery performance of the product.
FCC
This equipment has been tested and found to comply with the limits for a Class
B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC ID: 2AFGF-RAVINEPRO
FCC ID: 2AFGF-RAVINE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>