SUNSUN Z-8 Dog Training Collar and Automatic Anti-Barking Device User Guide

SUNSUN Z-8 Dog Training Collar and Automatic Anti-Barking Device

Product Information

The Dog Training Collar is an automatic anti-barking device that combines remote dog training and automatic anti-barking modes. It has a range of up to 1000 feet, allowing you to train your dog from a distance. The collar has three training functions: shock, vibration, and sound. It is designed with adjustable shock levels for small, medium, and large dogs with different hair types. The receiver is equipped with LED indicator lights to provide visual feedback.

Product Usage Instructions

1. Transmitter:The transmitter enters the dog training mode after power on. Chooseone training function (shock, vibration, or sound) by pressing thecorresponding button on the transmitter. The selected function iconwill appear on the screen. Press and hold the button to train yourdog, and release it to stop the training.
2. Automatic Barking Control Mode:When your dog barks, the device will detect the barking and shakingto activate the anti-barking warning. The warning method includes a2-second warning beep, followed by 3 seconds of vibration and 3seconds of shock. The warning will continue until your dog stopsbarking. To stop the anti-barking mode, switch to the dog trainingmode or turn off the device.
3. Mode Switching:To switch from the dog training mode to the automatic anti-barkingmode, press the mode switch button once. The anti-barking icon willappear on the screen, indicating that the emitter is successfullyswitched to the automatic anti-barking mode. To switch back to thedog training mode, press the mode switch button again, and theanti-barking icon will disappear.
4. Adjustable Shock Levels:The collar has three shock levels for small, medium, and largedogs. Each level can be adjusted from 0 to 19 tones by pressing the`+/-‘ button on the transmitter.
5. Receiver:In the dog training mode, the LED indicator light on the receiverwill be constantly on. In the anti-barking mode, the LED indicatorlight will flash at a low frequency. During charging, the LEDindicator light will flash at a high frequency, and when thebattery is fully charged, the LED indicator light will beconstantly on.

Product Specifications

1. Transmitter
   This product combines remote dog trainingandautomatic anti-barking modes, with a range of upto1000feet

2. Dog training mode:
   The Transmitter enters the dog training modeafterpower on. The dog training mode has three trainingfunction:shock, vibration and sound. Choose one functionbypressing the button, you will see the function icononthe screen. The receiver will immediately train your dog. Release the button, the receiver will immediatelystop.

3. Automatic barking control mode
   When your dog barks, its body will shake, andthedevice will detect your dog’s barking and shakingtomake an anti-barking warning.

   • Warning method: there will be 2 seconds warningbeep, 3 seconds vibration and 3 seconds shockinturn. Itwill not stop until your dog stops barking.
   • If you want to stop the anti-barking mode, switchtothe dog training mode or turn off the device.

4. Mode switching method:
   

   • a. Switch from the dog training mode to the automatic anti-barking mode:
     Press the mode switch button once, and you will see the anti-barking icon on the screen, and the emitters successfully switched to the automatic anti- barking mode.

   • b. Switch from the automatic anti-barking mode to the dog training mode:
     Press the mode switch button once, you will see the anti-barking icon disappears, and the emitter is successfully switched to the dog training mode.

5. Adjustable shock levels:

   • This product is designed with three shock levels for small, medium and large dogs of different hair types. Each level has 0-19 tones that can be adjusted by pressing the ‘+/-’ button.
   • You can set the shock levels for the dog training mode and the anti-barking mode separately
   • Shock level testing method:
   • Make the testing light full contact with the conductive pole, press the shock mode button and check the brightness of the testing light, the brighter the light, thehigher the shock level.

6. lock:

   • Press the lock, all mode buttons except the on/off buttons are locked.
   • When locked, you will see the lock icon on the screen. After unlocking, the icon will disappear.

7. When the device is charging, the power icon will flash, when the battery is fully charged, the power icon is constantly on.

Receiver

LED Indicator Light

1. In the dog training mode, the LED indicator light is constantly on. In the anti-barking mode, the LED indicator light flashes at low frequency.
2. When the device is charging, the LED indicator light flashes at high frequency, when the battery is fully charged, the LED indicator light is constantly on.

Shock Intensity Increase Shock Intensity Decrease

• ADJ: Size selection button
• LMS: Large/medium/small dog shock levels

FCC Warning Statement:

The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restriction. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>