Blueair 3613111100 Air Purifier User Manual

Blueair 3613111100 Air Purifier

Product Information

Usage Instructions

Safety Information:

The Blue Pure 211i+Max air purifier is an electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of fire, electric shock, or injury.

Regulatory Information:

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the# user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occurin a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

FCC/ISED RF Exposure Information: This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Product Map

Air Quality Status:

The air purifier has a particle sensor to measure the fine particles (PM 1, PM 2.5, and PM 10) levels. The LED indicator displays air quality status in 5 colors from excellent (blue) to very polluted (red).

Getting Started:

Auto Mode:

Automatically adjusts the fan speed based on your indoor PM levels to ensure optimal air quality. Recommended setting.

Safety information

Safety information Blue Pure 211i + Max
Model number 3613111100

Blue Pure 211i + Max air purifier is electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of fire, electric shock or injury.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Supervise children to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Always disconnect the appliance from the power supply before maintenance.
• Do not attempt to open or service the appliance yourself, this can void your warranty. Service must be done by the manufacturer, service agent or similarly qualified personnel using only original Blueair spare parts.
• Ensure that the power cable and the power plug are not at risk of getting damaged. To avoid hazard, a damaged power cable must always be replaced by the manufacturer, service agent or similarly qualified person.
• If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply and contact Blueair.
• The power plug must be firmly inserted in the power socket.
• To reduce the risk of electric shock, this equipment has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet. Do not alter the plug in any way.
• When disconnecting the unit from the power supply, do not pull on the power cord, pull on the power plug.
• Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet.
• Do not use an extension cord or a power strip. Refer to the rating label on your appliance. Do not alter the power plug in any way. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet.
• Do not use the included power cord for anything else but the appliance.
• Do not allow objects to enter or block the air inlets and air outlets as this can cause electric shock or damage the appliance.
• Do not place any objects on top of or directly against the appliance.
• Do not sit on, stand, climb onto or hang from the appliance.
• Keep the appliance, including the power cable, at a safe distance from heated surfaces and open fire.
• Keep the appliance and power plug away from water and other liquids.
• Keep the appliance and power plug away from chemicals such as pesticides and deodorants. Place the air purifier on the floor or a stable surface to prevent tipping.
• Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms or pool areas.
• Always turn off and disconnect the appliance from the power supply before moving the unit, changing filters, cleaning or carrying out maintenance procedures.
• Never clean with gasoline, chemical solvents, or corrosive materials as these agents may damage the air purifier.

Regulatory information

FCC STATEMENT

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC/ISED RF Exposure Information: This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.

Product map

• A. User interface
• B. Air outlet
• C. Air quality indicator (AQI)
• D. Fan motor
• E. Silencer
• F. Particle & carbon filter
• G. Washable fabric pre-filter

Air quality status
The air purifier has a particle sensor to measure the fine particles (PM 1, PM 2.5 and PM 10) levels. The LED indicator displays air quality status in 5 colors from excellent (blue) to very polluted (red).

Getting started

Buttons

1. ON/Standby

2. Night mode (lowest speed setting)

3. Fan speed (0-1-2-3-4)

4. Auto mode

5. Toggle
   Indicators

6. Filter replacement

7. Real-time PM values

8. Wi-Fi

Auto mode
Automatically adjusts the fan speed based on your indoor PM levels to ensure optimal air quality. Recommended setting.

Night mode

Lowest fan speed and fully dimmed lights.

Fan speeds 1–2-3-4

Fan speed levels which you can manually set by pressing the Fan Speed button on the interface or adjust via Blueair app.

How to use tips

Change brightness
Press the Fan Speed button and On/Standby button at the same time. Hold for three seconds.
Then, keep holding your finger on the On/Standby button and tap the Fan Speed button with the other finger to adjust brightness.
If the brightness is on the lowest level, then it will increase by one level. If the brightness is on the highest level, then it will decrease by one level.

Enable/disable Wi-Fi/Bluetooth
Wi-Fi is on by default. Long press Fan Speed button for about 5 seconds (until all the LEDs of the interface light up and blink once). Then release.
When the connection is enabled, the Wi-Fi LED will blink. After successfully connecting the appliance to the app, the Wi-Fi LED will stay solid. Wi-Fi LED off means the connection has been disabled.

Enable/disable Child lock
Long press On/Standby button for about 5 seconds (until all the LEDs of the interface light up and blink once). Then release.
When the Child lock is on the air purifier will continue to operate but the speed/mode button will be locked.

Filter reset
Extra long press Fan Speed button for about 15 seconds (until all the LEDs of the interface light up for the second time and blink once). Then release.
After replacing the filter, it is required to manually conduct filter reset on the appliance. If done correctly, the red filter replacement indicator will blink three times and then disappear.

Factory reset
Extra long press On/Stanby button for about 30 seconds (until all the LEDs of the interface light up for the second time and blink four times). Then release.
After factory reset, the air purifier restarts with default configuration will go into Standby mode.

Connect to the Blueair app

Connecting to the Blueair app allows you to control the air purifier remotely and monitor filter usage. The app offers additional functions to the air purifier.

Step 1
Download the Blueair app from the App store or Google play.

Step 2
Open the app. Create or sign into your Blueair account.

Step 3
Click on Connect Product and select Blue. Follow the instructions to complete app pairing.

First time connection tips
Make sure to turn on your air purifier. Once the Wi-Fi indicator is blinking, it is ready to be paired with your app.
Make sure you are using a visible Wi-Fi network that is not hidden.
VPN (Virtual Private Network) should be deactivated while using the Blueair App.

Bluetooth is required for first time pairing. Turn your phone’s bluetooth on and keep your phone within 3ft of the air purifier for initial pairing.

This air purifier can only connect to 2.4 GHz Wi-Fi. If you are using a dual- band Wi-Fi router, make sure to select 2.4GHz.

Keep your air purifier within 15 feet of your Wi-Fi router to maintain optimal connection.

Maintenance information

Important! Turn the air purifier off and disconnect the air purifier from the power supply before maintenance.

Changing your filter

When your air purifier’s indicator light turns red, it’s time to change the main filter. This will occur some time between 6 and 9 months of operation, depending on usage and your air quality conditions.

Step 1

Turn off the air purifier and unplug it. Rotate the top counter-clockwise to unlock, then lift up to remove it.

Step 2

Remove the fabric pre-filter and the silencer.

Step 3

Use the filter handles to pull out the old filter and replace with new. Make sure to remove plastic wrapping before inserting the new filter in the appliance.

Step 4

Place the silencer back on top of the filter. Pull up the the fabric pre- filter over the filter and the silencer. (Please ensure that the leather tag is on the upper side of the fabric pre-filter.)

Step 5

Twist the top back on and plug in the air purifier.

Step 6

Important! Turn the air purifier back on and reset the filter indicator by pressing down the Fan Speed button for 15 seconds. (until all the LEDs of the interface light up for the second time and blink once). Then release.

Cleaning your washable pre-filter

Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires a deeper clean, wash according to the instructions on the pre-filter´s label. Hang to dry.

Step 1

Turn the air purifier off and unplug it. Rotate the top counter-clockwise to unlock and remove it.

Step 2

Remove the fabric pre-filter from the silencer and main filter.

Step 3

Wash according to instructions on the fabric pre-filter´s label.

Step 4

Pull the clean pre-filter back over the silencer and main filter.

Step 5

Please ensure that the leather tab of the pre-filter is on the upper part.

Step 6

Push the top cylinder down, rotate it clockwise to lock it.

Disposal and recycling
This air purifier should be recycled as electronic waste. If you have any questions regarding the disposal of this air purifier, please contact your local waste management for best way to recycle.

Troubleshooting

Scan here to access additional product, registration, warranty information and FAQs.

www.blueair.com
Blueair Inc.
125 S Clark,
Suite 2000,
Chicago, IL, 60603 USA
Tel: +1 888 258 3247
info@blueair.com

References

• Air Purifiers & Air Filters for Clean Air in the Home | Blueair

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>