Blueair 110757 Blue Pure Mini Max User Manual
- June 1, 2024
- Blueair
Table of Contents
Blueair 110757 Blue Pure Mini Max
Safety information
-
Product name
Blue Pure Mini Max -
Model number
3131000100 -
Blue air purifiers are electrical appliances for indoor use only, take the necessary precautions to reduce the risk of fire, electric shock or injury.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
-
Children shall not play with the appliance.
-
Cleaning and user maintenance shall not be done by children without supervision.
-
Always disconnect the appliance from the power supply before maintenance.
-
Do not attempt to open or service the appliance yourself. Service must be done by the manufacturer, service agent or similarly qualified personnel using only original Blueair spare parts.
-
Ensure that the power cable and the power plug are not at risk of getting damaged. To avoid hazards, a damaged power cable must always be replaced by the manufacturer, service agent or similarly qualified person.
-
If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply and contact Blueair.
-
The power plug must be firmly inserted in the power socket.
-
When disconnecting the unit from the power supply, do not pull on 7 the power cord, pull on the power plug.
-
Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet.
-
Do not use an extension cord or a power strip. Refer to the rating label on your appliance.
-
Do not alter the power plug in any way. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet.
-
Do not use the included power cord for anything else but the appliance.
-
Do not allow objects to enter or block the air inlets and air outlets as this can cause electric shock or damage the appliance.
-
Do not place any objects on top of or directly against the appliance.
-
Do not sit on, stand, climb onto or hang from the appliance.
-
Keep the appliance, including the power cable, at a safe distance from heated surfaces and open fire.
-
Keep the appliance and power plug away from water and other liquids.
-
Keep the appliance and power plug away from chemicals such as pesticides and deodorants.
-
Place the appliance on the floor. The appliance must be placed on a stable surface.
-
Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms or pool areas.
The energy efficiency of this ENERGY STAR-certified model is measured based on
a ratio between the model’s CADR for Smoke and the electrical energy it
consumes, or CADR/Watt. Blue Pure.JOJ Max air purifier is an electrical
appliance for indoor use only. Take the necessary precautions to reduce the
risk of fire, electric shock or injury.
WARNING: RISK OF ELECTRIC SHOCK – These servicing instructions are for
use by qualified personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
Product map
- User interface
- Air outlet
- Noice shield
- Fan motor
- Particle & carbon filter
- Washable fabric pre-filter
Getting started
-
ON/Standby button
-
Fan Speed button
Indicators -
Night mode (lowest speed setting)
-
Speed 2
-
Speed 3
-
Filter replacement
Two button control
Press the ON/Standby button to turn the air purifier. Adjust the mode and the
fan speed using the Fan Speed button. This air purifier has a total of UISFF
fan speeds – Night mode being the lowest/most silent one, Speed UISFF being
the highest one.
Night mode
The lowest fan speed and fully dimmed lights. 1,2,3
Fan speeds 1-2-3
Fan speed levels which you can manually set by pressing the Fan Speed button
on the interface.
How to use tips
Filter reset
Extra long-press the Fan Speed button for about 15 seconds (until all the LEDs
of the interface light up). Then release. After replacing the filter, it is
required to manually conduct a filter reset on the appliance. If done
correctly, the red filter replacement indicator will blink three times and
then disappear.
Enable/disable Child locks
Long press the On/Standby button for about 5 seconds (until all the LEDs of
the interface light up and blink once). Then release. When the Child lock is
on the air purifier will continue to operate but the speed/mode button will be
locked.
Maintenance information
Important!
Turn the air purifier off and disconnect the air purifier from the power
supply before maintenance.
Changing your filter
When your air purifier’s indicator light turns red, it’s time to change the
main filter. This typically occurs at 6 months of active operation.
Step 1
Turn off the air purifier and unplug it. Rotate the top counter-clockwise to
unlock it, then lift it to remove it.
Step 2
Remove the fabric pre-filter and the noise shield.
Step 3
Use the filter handles to pull out the old filter and replace it with a new
one. Make sure to remove plastic wrapping before inserting the new filter in
the appliance.
Step 4
Place the noise shield back on top of the filter. Pull up the fabric pre-
filter over the filter and the noise shield. (Please ensure that the leather
tag is on the upper side of the fabric pre-filter.)
Step 5
Twist the top back on and plug in the air purifier.
Step 6
Important! Turn the air purifier back on and reset the filter indicator by
pressing down the Fan Speed button for 15 seconds. until all the LEDs of the
interface light up for the second time and blink once).
Cleaning your washable pre-filter
Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior
of the fabric with a soft brush attachment. If the pre-filter requires a
deeper cleaning, wash according to the instructions on the pre-filter’s label.
Hang to dry.
Step 1
Turn the air purifier off and unplug it. Rotate the top counter-clockwise to
unlock and remove it.
Step 2
Remove the fabric pre-filter from the noise shield and main filter.
Step 3
Wash according to the instructions on the fabric pre-filter label.
Step 4
Pull the clean pre-filter back over the noise shield and main filter.
Step 5
Please ensure that the leather tab of the pre-filter is on the upper part.
Step 6
Push the top cylinder down, and rotate it clockwise to lock it.
Disposal and recycling
This air purifier should be recycled as electronic waste. If you have any questions regarding the disposal of this air purifier, please contact your local waste management for the best way to recycle it.
Troubleshooting
For more information and troubleshooting tips, please check the Support page at www.blueair.com
Blueair Inc.
125 S Clark,
Suite 2000,
Chicago, IL, 60603 USA
Tel: +1 888 258 3247
[email protected]