EMEET GeniusCall HS80 Wireless Headphone User Manual
- June 12, 2024
- eMeet
Table of Contents
EMEET GeniusCall HS80 Wireless Headphone
IN THE BOX Overview
Operation Instructions
Power on/off
- Press and hold the power/Bluetooth button for 2 seconds to turn on the device. Press and hold the button for another 2 seconds to turn off the device.
Connection and Pairing
Connect to a PC
- Insert the EMEET Adapter attached to the device into your PC’s USB port to operate.
- Connect the headset with a USB cable, and insert the other end of the USB cable into your PC’s USB port. The headset serves as a wired one.
Pair with a smartphone
- Press the power/Bluetooth button twice until the indicator flashes blue and a prompt sound is heard from the headset.
- Select “EMEET GeniusCall HS80” from the list of Bluetooth devices to connect with it.
Wearing
- You can wear the headset with the boom on either side (lefter right). Pull the boom to the bottom to switch between the left and right channels.
- You can mute or unmute the MIC during a call by moving the boom. (Note: The indicator remains unchanged when the MIC is muted or unmuted)
Charging
- To charge the headset, connect the charging base to a power source through a USB cable, then place the headset on the charging base.
- Connect the headset to a power source through a USB cable. The power indicator blinks green during charging and turns off when the headset is fully charged.
Button Operation Instructions
| Button | Operation | Action |
|---|
Power / Blueto button
| ****
oth
| Press and hold for 2 seconds| Power on/off
Press twice| Bluetooth pairing starts (with the device on)
Press| Check battery level (with the device on)
Press and hold for 10 seconds| Force restart
Mute / unmute| MIC| Press| Mute/unmute MIC (duringa call)
Volume+
| Press| Volume+
Press and hold| Next
Volume-
| Press| Volume-
Press and hold| Previous
Multifunction Button
| ****
Press
| Answer/switch a call
Play/pause
Press and hold
| Reject a call (when a call comes in)
End a call (during a call)
Rapidly press twice| Call back
Simultaneously press and hold the Volume+ and Volume- buttons for 10
seconds| Reset
LED Indicator
| Feature | Status | LED |
|---|
Charging A
| Charging| Flashes green
Fully charged| Off
Status indicator A| Calling| Steady red
Battery indicator B
| Low battery| Red for 5 seconds and off
Medium battery| Yellow for 5 seconds and off
High battery| Green for 5 seconds and off
Bluetooth status
indicator B
| Bluetooth pairing| Flash blue
Bluetoothconnected| Blue for 5 seconds and flashes
Dongle status C
| Pairing| Flash blue
Connected| Steady blue
Download Application
Please visit www.emeet.com/EMEETLINK to
download the EMEETLINK PC desktop app for software updates and other user-
defined operations.
Note : The device can operate normally even if EMEETLINK is not
downloaded.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>