niko 353-602121 P42MR 230V Presence Detector User Manual
- June 12, 2024
- niko
Table of Contents
niko 353-602121 P42MR 230V Presence Detector
Presence detector P42MR, 230 V, master, 12-13 m, 360°, for surface mounting.
Wiring
Connection diagram
230 V – OFF
- Remove if you want to use the contact as a dry contact (potential-free).
This product must be secured with a miniature circuit breaker (MCB) of max. 16 A in the electrical cabinet. The MCB rating is limited by national installation rules.
Dimensions
Installation
If a grommet needs to be replaced, please make sure the new grommet is halogen-free.
Dismantling
230 V – OFF
App settings
230 V – ON
| | |
---|---|---|---
Factory settings| Switch ON/OFF| 500 lux| 15 min
| |
---|---|---
LED behaviour
Green LED continuous on| | Connection OK|
---|---|---|---
Green LED breathing| | Connection OK, overrule ON|
Green LED flashing| | Warming up| Wait
Red LED continuous on| | Error|
_More info – >_detector tool
Red LED breathing| | Warning
Blue LED flashing| | Walk test active
Specifications
Article number 353-602121
Configuration 230 V Master
Input voltage 230 Vac ± 10 %, 50 Hz
Maximum power consumption 0.2 W
Circuit breaker maximum MCB rating 16 A*
Relay contact NO (max. µ10 A), potential-free
Maximum load incandescent and halogen lamps (cosφ = 1) 2300 W
Maximum load fluorescent lamps (cosφ ≥ 0.5) 1200 VA
Maximum load economy lamps (CFLi) 350 W
Maximum load LED lamps 230 V 350 W
Maximum load LED driver 500 VA
Maximum load electronic transformer 500 VA
Maximum capacitive load 140 µF
Maximum switching current 165 A/20 ms – 800 A/200 µs
Light intensity range 20 – 2000 lux, ∞
Number of channels 1 channel
Maximum number of secondary detectors 10
Switch-off delay pulse, 15 s – 120 min, ∞
Hysteresis on light intensity + 10%
Detection angle 360 °
Detection range (PIR) Ø 12 m from a height of 3 m
Ambient temperature -25 – +40 °C
Mounting method surface mounting
Mounting height 2 – 3.5 m
Colour white (RAL 9010)
Dimensions visible (HxWxD) 100 x 100 x 50 mm
Dimensions (HxWxD) 100 x 100 x 50 mm
Wire capacity 1.5/2.5 mm²
Maximum range Bluetooth® (free field, depending on the device) 50 m
Operating frequency 2.4 GHz
Maximum radio frequency power -2 dBm
Protection degree IP54
Impact resistance IK02
Modification of settings app (iOS/Android) and 2-way Bluetooth®
communication
Halogen-free yes
Marking CE
- The MCB rating is limited by national installation rules.
Detection area
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check the wiring scheme |
| The ambient light is too strong | Check the response value luminosity and |
raise the value if necessary
Load does not turn off| The switch-off delay is too long| Check the switch-off
delay and shorten the
delay if necessary
The detector receives false triggers| Check for any objects that may cause
false triggering and remove them from the
detection range or lower the sensitivity
App cannot connect to the detector| Bluetooth® has been disabled on your
mobile device| Enable Bluetooth® on your mobile device
Support & contact
nv Niko sa
Industriepark West 40
9100 Sint-Niklaas, Belgium
www.niko.eu
+32 3 778 90 80 support@niko.eu
Niko prepares its manuals with the greatest care and strives to make them as complete, correct and up to date as possible. Nevertheless, some deficiencies may subsist. Niko cannot be held responsible for this, other than within the legal limits. Please inform us of any deficiencies in the manuals by contacting Niko customer services at support@niko.eu.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>