MINELAB MDS-10 Dual Sensor Detector User Guide

MES-10
Field Guide
MDS-10 Dual Sensor Detector

MDS-10 Unfolding Procedure

1. Extend the Lower Shaft
   

2. Unfold the Detector
   

3. Unfold the Sensor Head

4. Position the Armrest
   

5. Extend the Middle Shaft
   

Factory Reset

Quick Start

1. Turn On
   

2. MD Ground Balance
   

3. MD Test Piece
   

4. GPR Skyshot
   

5. GPR Test Target
   

6. Begin Detecting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>