MINELAB 0049 Handle RHS Mldg Printed Explorer User Manual
- June 10, 2024
- MINELAB
Table of Contents
MINELAB 0049 Handle RHS Mldg Printed Explorer
Product Information
This user manual provides important safety information and instructions for using the Minelab metal detector. The detector complies with the EU Directive 2014/53/EU and is designed to detect metals. The manual contains simplified EU conformity statements, warranty terms, and assembly instructions for the detector. The detector can be modified only by the manufacturer or an authorized technician. The operator of the detector is responsible for obtaining the necessary local licenses or permits for using the device.
Product Usage Instructions
- To assemble the detector, refer to the Quick Guide included orvisit www.minelab.com/product-manuals for more information.
- For complete product specifications and usage advice, visit www.minelab.com/product-manuals or contact customer support to request a paper copy.
- Register your product online at register.minelab.com to activate the warranty.
- Do not pack or store the detector as luggage.
- Only use the detector for its intended purpose of detecting metals.
- Obtain all necessary local licenses or permits for using the detector.
- Do not modify the detector as it may void the warranty and compromise its safety.
- For more detailed product information and operating instructions, refer to the user manual available at www.minelab.com/knowledge-base/product-manuals.
ADVICE AND SAFETY INSTRUCTIONS
For complete product specification and operational guidance, read the Instruction Manual at www.minelab.com/product-manuals. Alternatively, please contact us to make arrangements for a copy.
ASSEMBLY INSTRUCTIONS
For guidance on detector assembly, please refer to the Getting Started Guide
included or visit: www.minelab.com/product-manuals.
The Minelab website also provides information on accessories available for
your detector.
WARRANTY TERMS
Please refer to www.minelab.com/support/product- warranty for full warranty terms and conditions. Register your product warranty online at register.minelab.com.
SAFETY CONSIDERATIONS
- Keep out of reach of children, small parts are a choking hazard.
- Do not mutilate the batteries.
- Dispose of batteries as per local regulations.
- Only charge the detector and accessories according to the instructions in the manual.
- Do not dispose of the detector or accessories in a fire.
- Disconnect coil before packing/storing as luggage.
- CAUTION — Risk of explosion if battery is replaced by an incorrect type.
- CAUTION — Only charge the battery in ambient temperatures between 0°C and 40°C.
- Headphone use at HIGH volume may cause reduced awareness of surroundings and could lead to hearing damage. Use at lower volumes advised.
- Adult supervision required when used by children.
REGULATORY INFORMATION
Federal Communications Commission (FCC) Statements (as applicable)
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- (1) This device may not cause harmful interference, and
- (2) this device must accept any interference received, including interference that may cause undesired operation.
Part 15.105 NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
US Responsible Party: MINELAB AMERICAS INC, 123 Ambassador Drive, Suite
123, Naperville, IL 60540, USA
ComplianceManager@minelab.com.au
Compliance Statements for Canada (as applicable) This product meets the
applicable Innovation, Science and Economic Development Canada technical
specifications.
RSS-Gen notice : This device complies with Industry Canada’s license-
exempt RSSs. Operation is subject to the following two conditions: 1) This
device may not cause interference; and 2) This device must accept any
interference, including interference that may cause undesired operation of the
device.
Modification
Any changes or modifications not expressly approved by the grantee of this
device could void the user’s authority to operate the device.
Simplified EU & UKCA Declaration of Conformity
Hereby, Minelab Electronics Pty Ltd declares that the radio equipment type
[Refer to detectors listed in Table 1] complies with Directive 2014/53/EU and
The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of the EU &
UKCA declarations of conformity are available at the following internet
address:
www.minelab.com/compliance.
EU Importer: MINELAB ELECTRONICS PTY LTD,
2 Second Avenue, Mawson Lakes, SA 5095, Australia
License / Permit
The equipment operator is responsible for investigating and obtaining any required local license or permit for metal detecting activities.
WEEE:
This symbol indicates that the equipment and its electrical accessories should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling and proper disposal. Refer 2012/19/EU (Waste Electrical and Electronic Equipment).
RADIO FREQUENCY SPECIFICATION
CERTIFICATION SCHEME ID
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. | The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by [Minelab Electronics Pty Ltd] is under license. Other trademarks and trade names are those of their respective owners.
Certification and logo usage dependant on product and region
Documents / Resources
|
MINELAB 0049 Handle RHS Mldg Printed
Explorer
[pdf] User Manual
0049, Z4C-0049, Z4C0049, 0049 Handle RHS Mldg Printed Explorer, 0049, Handle
RHS Mldg Printed Explorer, RHS Mldg Printed Explorer, Printed Explorer,
Explorer
---|---
References
- MINELAB - Register Your Minelab
- StackPath
- StackPath
- StackPath
- StackPath
- StackPath
- Product Warranty | Minelab Metal Detectors