MINELAB MANTICORE Metal Detector User Guide
- June 4, 2024
- MINELAB
Table of Contents
GETTING STARTED GUIDE
QUICK START
1
TURN ON
2
SELECT SEARCH MODE
3
NOISE CANCEL
4
GO DETECTING
SEARCH MODES
ALL-TERRAIN
Great for high-trash recreational areas, fields and historical locations
including most general detecting.
GENERAL FAST LOW CONDUCTORS
HIGH CONDUCTORS TRASH REJECT
BEACH
Perfect for all salty conditions – dry sand, wet sand, surf and underwater.
GENERAL LOW CONDUCTORS
DEEP SURF & **SEAWATER**
GOLDFIELD
Ideal for gold nugget prospecting in mineralised goldfield locations.
GENERAL
Can’t decide which Mode to use?
Use the General Mode for your detecting location.
ASSEMBLY
TIGHTEN CAMLOCKS
Tighten the Camlocks if they slip or become loose.
Open Tighten gently in increments
Close Check and repeat if needed
CHARGING
7-8 HOURS
CAUTION: Charge your detector with a good-quality USB charger that has a minimum charging capacity of 2A @ 5V. Risk of USB charger failure if a low- quality charger is used.
Look for the following marks on USB chargers:
CAUTION: Only charge the detector in ambient temperatures between 0°C and +40°C.
3 HOURS
CONTROLS & DISPLAY
SETTINGS MENU
Press from the Detect Screen to open the Settings menu.
1 Back
General Settings
Frequency
Audio Theme
Target Tones
Ferrous Tones
Ferrous Limits
Discrimination Pattern
Recovery Speed
Ground Balance
Noise Cancel
Search Mode
Volume
1 Flashlight
2 Tracking Ground Balance
3 Wireless Audio
4 Light Sensor
5 Headphones Connectivity
6 Battery Level/Charging
7 Target ID Number
Conductive ID Conductive ID with Ferrous Indicator
Salt Indicator (Beach Modes only)
8 Wireless Audio On/Off
9 Target Depth Indicator
10 Side Soft Key
11 ID MAP
a) Ferrous Limits
b) Target Trace (e.g. nail)
c) Discrimination Pattern
d) Target Trace (e.g. coin)
e) Target ID Scale Conductivity
f) More Ferrous
g) Less Ferrous
12 Navigation Arrows (×4)
13 Pinpoint
Press from the Detect Screen to toggle Pinpoint mode
14 Sensitivity
Press / from the Detect Screen to adjust Sensitivity
15 Action Bar Soft Keys (×2)
16 Action Bar
Actions/icons change depending on settings or the current screen
17 Backlight/Lighting
18 Sensitivity Level
19 Power
20 Frequency
21 Search Mode
22 Large Metal Overload
23 Charge Status LED
Scan the QR code or visit www.minelab.com/manticore for all product downloads including the full-length User Manual, specifications, software updates and learning resources.
Get these languages and more:
EN English FR français PT Português
DE Deutsch JP 日本語 RU русский
ES Español KO 한국어 ZH 中文
For product compliance information:
Settings > General Settings > Compliance
minelab.com 4901-0315-1