Minelab Electronics ML100A Wireless Headphone User Manual

Minelab Electronics ML100A Wireless Headphone

BUTTONS AND INDICATIONS

1. VOLUME PLUS BUTTON (+)
   Increases the Volume by one level, and plays the next track (music function).

2. MULTI-FUNCTION BUTTON (MFB)
   Turns the headphones On or Off, plays and pauses music (music function), activates Pairing Mode, and resets the headphones to factory defaults.

3. VOLUME MINUS BUTTON (−)
   Decreases the Volume by one level, and plays the previous track (music function).

4. STATUS LED

5. USB MICRO-B CHARGING SOCKET
   

6. HEADPHONE SOCKET 3.5 mm (1⁄8 inch)

MINELAB ML 100 HEADPHONES
Minelab ML 100 headphones use aptX™ Low Latency technology which delivers faster, higher quality audio than standard Bluetooth, so it will give more precise and faster detection responses when used for metal detecting. They contain the latest QCC3034 chipset with aptX and aptX Low Latency and are compatible with devices that support Bluetooth.

PACKAGE CONTENTS

• ML 100 Headphones
• 3.5 mm (1/8 inch) Detachable Auxiliary Cable
• USB Charging Cable
• Instruction Manual

CHARGING THE HEADPHONES

Connect the USB charging cable to the charging USB socket 5 of the headphones. The Status LED 4 will remain solid red during charging. When charging is complete, the Status LED 4 will turn solid blue.
NOTE: USB Charger is not supplied. Any generic high-quality USB charger can be used.

TURNING ON THE HEADPHONES

Press and hold the MFB 2 until the Status LED 4 flashes solid blue for 1 second and then flashes blue with an ascending ‘beep’ sound. The headphones enter pairing mode automatically when no device is paired.

TURNING OFF THE HEADPHONES
To turn Off the ML 100 headphones, press and hold the MFB 2 for 2 seconds until the Status LED 4 flashes red.

PAIRING TO A DETECTOR

1. Place the headphones and the detector no more than 1 meter (3 feet) apart.
2. Ensure the headphones are turned Off.
3. Press and hold the MFB 2 until a double ascending tone is heard and the Status LED 4 flashes red and blue.
4. Press and hold the wireless button on the detector for 3 seconds. The Bluetooth icon on the detector display will flash rapidly.
5. When the pairing is complete, the headphones will beep and the Status LED 4 will flash blue 3 times repeatedly, indicating that they are connected to the detector.

NOTE: If the pairing cannot be completed within 5 minutes after the pairing mode has been activated, the headphones will automatically enter Standby Mode.
NOTE: ML 100 headphones can be paired with two devices simultaneously so you can pair them with both your detector and your smartphone.

CONNECT WITH THE LAST PAIRED DEVICE
The headphones will automatically connect with the last-paired device. If the connection is successful, the Status LED 4 will flash blue 3 times repeatedly.

MUSIC FUNCTIONS

PLAY / PAUSE MUSIC
Press the MFB 2 to pause/play music on your connected device. When music is playing, the Status LED 4 will flash blue 3 times repeatedly.

NEXT / PREVIOUS TRACK

• Next Track: Press the + button for 2 seconds.
• Previous Track: Press − the button for 2 seconds.

ADJUST THE VOLUME

• Increase Volume: Press the + button.
• Decrease Volume: Press − the button.

CONNECTING THE AUXILIARY CABLE
The ML 100 headphones are supplied with a detachable 3.5 mm (1⁄8 inch) auxiliary cable for wired operation. To use the cable, plug the connector into the headphone jack 6 and turn 90° anti-clockwise to lock the connector .

FACTORY RESET

Make sure the headphones are turned off. Press the MFB 2 for approximately 10 seconds until there are 2 beeps and the Status LED 4 flashes pink 2 times. Release the button. The Status LED 4 will now be flashing red and blue, indicating that the headphones are in pairing mode. All previously paired devices will be unpaired

SAFETY INFORMATION

• Check local laws regarding the use of smartphones and headphones whilst driving.

• If you use the headphones whilst driving, ensure your attention and focus remain on the road and you drive in a responsible
  and safe manner.

• Never allow children to play with the headphones, small parts are a choking hazard.

• Observe all signs that require an electrical device or RF radio product to be switched off in designated areas. These could include hospitals, blasting areas, and potentially explosive environments.

• Turn off your headphones prior to boarding an aircraft.

• Never mount or store your headphones over any air bag deployment area as serious injury may result if the air bag deploys.

• Do not open or mutilate the built-in battery.

• Dispose of batteries according to local regulations. Do not dispose of it as household waste.

• Only charge the headphone’s built-in battery in accordance with the instructions contained in the user guide.

• Avoid charging the headphones in extreme temperature conditions.

TROUBLESHOOTING

If you are unable to connect your headphones to your device, try the following:

• Ensure your headphones are turned on and are fully charged.
• Ensure the headphones are paired with your device.
• Ensure your devices Bluetooth feature is activated. Refer to your devices user guide for specific instructions.
• Ensure the headphones are within 10 metres (32 feet) of your device and there are no obstructions such as walls or other electronic devices in between.

CARE AND MAINTENANCE

• Turn the headphones off before placing them in a pocket or bag. If the MFB 2 is accidentally activated, your smartphone may place an unintended call if paired.
• Do not expose the headphones to liquid, moisture, or humidity, as the headphones are not waterproof.
• Do not use abrasive cleaning solvents to clean the headphones.
• Do not expose the headphones to extreme temperature conditions.
• Do not dispose of the headphones in a fire as this may result in an explosion.
• Do not bring the headphones into contact with sharp objects as this will cause scratches and damage.
• Do not attempt to disassemble the headphones, as they do not contain serviceable components.
• If the headphones are not used for long periods, store them in a dry place free from extreme temperature conditions and dust.

PRODUCT SPECIFICATION

• Minelab reserves the right to introduce changes in design, equipment, and technical features at any time without notice. For the most up-to-date specifications, visit www.minelab.com.
• MI.NELAB® is a trademark of Minelab Electronics Pty. Ltd. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm
• Incorporated, and registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries. The
• Bluetooth® word marks and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Minelab Electronics Pty. Limited is under License. Other trademarks and trade names are those of their respective owners.

ADVICE AND SAFETY INSTRUCTIONS
For complete product specification and operational guidance, read the Instruction Manual at www.minelab.com/product-manuals. Alternatively, please contact us to make arrangements for a copy.
ASSEMBLY INSTRUCTIONS
For guidance on detector assembly, please refer to the Getting Started Guide included or visit: www.minelab.com/product-manuals. The Minelab website also provides information on accessories available for your detector.
WARRANTY TERMS
Please refer to www.minelab.com/support/product- warranty. for full warranty terms and conditions. Register your product warranty online at register.minelab.com.

SAFETY CONSIDERATIONS

• Keep out of reach of children, small parts are a choking hazard.
• Do not mutilate the batteries.
• Dispose of batteries as per local regulations.
• Only charge the detector and accessories according to the instructions in the manual.
• Do not dispose of the detector or accessories in a fire.
• Disconnect the coil before packing/storing it as luggage.
• CAUTION: Risk of explosion if the battery is replaced by an incorrect type.
• CAUTION: Only charge the battery in ambient temperatures between 0°C and 40°C.
• Headphone use at HIGH volumes may cause reduced awareness of surroundings and could lead to hearing damage. Use at lower volumes is advised.
• Adult supervision is required when used by children.

REGULATORY INFORMATION

Federal Communications Commission (FCC) Statements (as applicable)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

US Responsible Party: MINELAB AMERICAS INC, 123 Ambassador Drive, Suite 123, Naperville, IL 60540, USA ComplianceManager@minelab.com.au. Compliance Statements for Canada (as applicable) This product meets the applicable Innovation, Science, and Economic Development Canada technical specifications.
RSS-Gen notice: This device complies with Industry Canada’s license- exempt RSSs. Operation is subject to the following two conditions: 1) This device may not cause interference; and 2) This device must accept any interference, including interference that may cause undesired operation of the device.
Modification:
Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Simplified EU & UKCA Declaration of Conformity: Hereby, Minelab Electronics Pty Ltd declares that the radio equipment type [Refer to detectors listed in Table 1] complies with Directive 2014/53/EU and The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of the EU & UKCA declarations of conformity are available at the following internet address: www.minelab.com/compliance.
EU Importer:
MINELAB ELECTRONICS PTY LTD, 2 Second Avenue, Mawson Lakes, SA 5095, Australia
License / Permit:
The equipment operator is responsible for investigating and obtaining any required local license or permit for metal detecting activities.
WEEE: This symbol indicates that the equipment and its electrical accessories should not be disposed of as household garbage. These items should not be disposed of as unsorted municipal waste and should be taken to a certified collection point for recycling and proper disposal. Refer to 2012/19/EU (Waste Electrical and Electronic Equipment).

RADIOFREQUENCY SPECIFICATION

CERTIFICATION SCHEME ID

indicates the use of e-labeling; follow instructions in Manual/carton to access.

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by [Minelab Electronics Pty Ltd] is under license.
• Other trademarks and trade names are those of their respective owners.
• Minelab Electronics, PO Box 35, Salisbury South, South Australia 5106
• Certification and logo usage dependant on product and region

References

• MINELAB - Register Your Minelab
• Metal Detectors | Minelab Metal Detectors
• Concidiones de garantía limitadas del producto Detectores de metales de alto rendimiento
• StackPath
• StackPath
• StackPath
• StackPath
• StackPath
• Product Warranty | Minelab Metal Detectors

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>