MINELAB GPZ 7000 Metal Detector User Manual
- June 12, 2024
- MINELAB
Table of Contents
MINELAB GPZ 7000 Metal Detector
Product Information
- Product Name: Field Guide Przewodnik terenowy
- Part Number: 4903-0055-PL-1
- Manufacturer: Minelab
- Website: www.minelab.com
Product Usage Instructions
- Press and hold the specified button for 10 seconds to perform the action.
- Select “Reset All” option to reset the device to its factory settings.
- Use the “Noise Cancel” feature to cancel out background noise.
- Utilize the “Quick-Trak” feature for fast tracking.
- Adjust the “Threshold Level” to set the desired threshold for detecting signals.
- If using the optional WM 12 device, connect it as instructed.
- Follow the on-screen instructions for further guidance.
- Experiment with different modes like “Gold Mode,” “High Yield,” “Extra Deep,” etc., based on your detection needs.
- Select the appropriate “Ground Type” setting based on the soil mineralization level.
- Keep the coil close to the ground while sweeping.
- Sweep the coil slowly over one spot to ensure thorough detection.
- Avoid bringing any metal objects near the coil while detecting.
- Maintain a recommended distance of 15 meters (45 feet) between detectors to prevent interference.
- Overlap your sweeps for better coverage.
- After digging, refill the hole created during detection.
Please refer to the user manual for detailed instructions and additional information.
Quick Start
- Turn On and wait for battery indicator
- Select Quick Start
- Select Reset Settings
- Noise Cancel
- Quick-Trak
- Start Detecting
Threshold Level
Connect
Connect WM 12 (optional)
- Select ‘Connect WM 12’
- Follow the on-screen instructions
Gold Mode
-
High Yield
Small/Medium nuggets -
General
General nuggets -
Extra Deep
Deep large nuggets
Ground Type
-
Normal
Low soil mineralisation -
Difficult
High soil mineralisation -
Severe
Severe soil mineralisation
Quick-Trak
- Keep coil close to ground
- Sweep coil over one spot
-
- Sweep until audio is stable
-
- Start detecting
Detecting Basics
- Sweep level
- Sweep slowly
- Overlap sweep
- Keep metal away from coil
- Move apart
- Refill hole
Factory Reset
- Press and hold for 10 seconds
- Select Reset All
Read the Instruction manual for more detailed information
Read User Manual Online (PDF format)
Loading......