LAMBARIO LT10-01510 LED Waterproof Lamp User Manual
- June 12, 2024
- LAMBARIO
Table of Contents
LAMBARIO LT10-01510 LED Waterproof Lamp
Product Information
| Model No | Power Voltage | Watt | IP | Lumen |
|---|---|---|---|---|
| LT – -V | – | W | IP | 4320lm |
| LT – -V | – | W | IP | 5600lm |
Replaceable (LED only) light source by a professional.
Replaceable control gear by a professional.
Suitable for a maximum use of 10-12 hours daily usage of the product, for 24 hours per day would void the warranty.
Product Usage Instructions
- Ensure the power voltage matches the requirements of the product.
- Insert the appropriate wattage light source into the LT – -V model.
- If the LED light source needs replacement, contact a professional for assistance.
- If the control gear needs replacement, contact a professional for assistance.
- Do not exceed 10-12 hours of daily usage to maintain warranty coverage.
Specification
This product contains a light source of energy efficiency class
Suitable for a maximum use of 10-12 hours daily usage of the product, for 24hours per day would void the warranty
Replaceable (LED only) light source by a professional
Replaceable control gear by a professional
Installation Guide
LED Waterproof lamp
AC200~240V 50/60Hz
! WARNING
- Turn power off before inspection, installation or removal.
- Supply connection and other external wiring conductor shall be at least 1.0 mm? and confirm to 60245IEC57.
The LED waterproof lamp made from PC/ ABS body & PC lampshade,Reach IP65.
Can be applied to garage, subway station, underground passage. clean workshop.
warehouse etc.
Installation
- Fasten the two ceiling clips to installation surface.
- Open junction box cover of the body with screwdriver.(DWG1)
- Link to power source. (DWG2)
- Cover back to junction box cover.
- Install the lamp to the ceiling clips. (DWG3)
- Hanging installation type reference DWG4.
Dimension
WARNINGS
- Please read the user guide carefully before you install or use the product.
- Before installation, please read and follow the technical specification and symbols shown in the product box.
- Before installing, make sure that the electrical power is disconnected
- The product is not suitable for regulating circuit breaker
- The product is not suitable for covering with thermo-insulating material
- Do not throw the product away from household waste. Please ask your municipality about how to use it.
- The product must be installed and maintained by qualified persons.
WARRANTY CONDITIONS
- If a defect occurs during the warranty period, the company is responsible for repairing it. If repair is not possible then the company must replace the product.
- The warranty is valid by affirming that the product is correctly installed in accordance with the remarks, symbols and / or technical specifications printed on the box or the usage guide.
- The Company shall not be liable for any injury or damage from improper use of the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>