KBDcraft L140W210 Adam0110b MERGING KIT Instruction Manual
- June 12, 2024
- KBDcraft
Table of Contents
KBDcraft L140W210 Adam0110b MERGING KIT
Product Information
Adam 0110b Merging Kit
Product Name: Adam 0110b Merging Kit
Instruction Manual Version: 1.0
Intro Project0110: Adam0110a – The modularity of the first art
The Adam 0110b Merging Kit is a modular keyboard kit that allows for the flexible mechanical attachment of multiple independent modules. It offers deep integration of two modules, resulting in a more capable and rigid keyboard.
The kit includes the following components:
- Adam0110a module (F)
- Adam0110a module (L)
- Project0110 Adam0110b module
- Adam0110b module (L)
- Adam0110b New PCB module
- The Cores (modules) in the kit have the ability to transmit data and be powered by a single cable. The kit includes two types of PCBs: type-a and type-b.
- The PCB type-a features a socket for internal connection on each side with different marks. To connect the wire, ensure it is connected to the same marks.
- The later released Kit Addams, including the PCB type-b, is developed under the latest technical guidelines and features sockets for internal data transmission.
- The Adam0110b Merging Kit requires 4 base plates for installation. If you want to install the lefty Numpad, mirror the parts of steps 4-5 left and right.
- Before using the Numpad, it needs to have the right firmware installed to work under different connections.
To install/change the firmware, follow these steps:
- Plug out the Numpad.
- Press and hold the first button (Numlock) in the upper left corner of the Numpad.*
- While still holding the button, plug in the cable.
- A disk drive called Addams0110 will appear on your system, then release the button.
- Drag the firmware (.uf2 file) into the storage disk.
- The PCB will install the firmware and restore the factory settings.
To activate the key value of Layer(1), hold Fn or Numlock. You can change all the shortcut keys and light settings on VIAL. Visit http://get.vial.today for more information.
Intro Project0110
Adam0110a module arity of the first
The flexible mechanical attachment of multiple independent modules 
Project0110 Adam0110b
Adam0110b modularity of the secondary Thedeepintegrationoftwomodules
- When we try to integrate the two submodules further in order to get a more capable and rigid keyboard, the quick-release mechanism will no longer be the choice. The integration of the functionality will be taken to a new level.
- One of our first concepts was the “baby” full-size Adam0110b, which combines two modules and uses 99% of the parts from the original Adam and Addams kit. It also offers two layout options, with a left- or rightpositioned Numpad.
Adam0110b NewPCB
The Cores should have the ability to transmit data and be powered by one cable
.
- The early developed PCB64 for Adam did not feature an extension socket. Since July 2023, we have upgraded all Core64 kits with the new PCB type-a, which is ready for Project0110’smodularapplication.
- PCB type-a has a socket for internal connection on each side with different marks. Please connect the wire to the same mark.
- In the figure, connections in common positions are demonstrated.
1 Brick Time!
Adam0110b needs 4 base plates
Put the gaskets on.
Put both Cores in after this step.
Put the rubber feet on and check the sit.
Firmware
The Numpad needs the right firmware to work under different connections
.
Firmware Installation
Download:https://kbdcraft.store/pages/opensource
Steps to install/change the firmware:
- Plug out.
- Press and hold the first button (Numlock) in the upper left corner of the Numpad.*
- While still holding the button, plug in the cable.
- A disk drive called “Addams0110” will appear on your system, then release the button.
- Drag the firmware (uf2. file) into the storage disk.
- The PCB will install the firmware and restore the factory settings.
vial
Activate the key value of Layer(1) by holding Fn or Numlock. You can change all the shortcut keys and light settings on VIAL. http://get.vial.today
Documents / Resources
|
KBDcraft L140W210 Adam0110b MERGING
KIT
[pdf] Instruction Manual
L140W210 Adam0110b MERGING KIT, L140W210, Adam0110b MERGING KIT, MERGING KIT
---|---