CareCo Vista 8 Wheelchair User Manual

CareCo Vista 8 Wheelchair

SPECIFICATIONS

WHEELCHAIR COMPONENTS

1. Push handles
2. Back upholstery
3. Rear wheel
4. Pushrims
5. Cross-brace
6. Anti-tipper
7. Fork
8. Caster
9. Armrest
10. Brake handles
11. Footrest
12. Footplate

INSTRUCTIONS

Folding and Opening

• » To fold, flip up the foot-plates or remove the footrests altogether and pull up on the center front & back of seat upholstery.
• » To unfold, push down on the seat side frame until the seat locks into place. Put the footrests on and/or fold down the foot-plates.

INSTRUCTIONS

Adjusting the Footrest Length
Using the wrench provided, place it over the bolt and turn to left to loosen or to the right to tighten in place. Adjust the length by sliding the footrest up or down so that the person’s full thigh is supported by the seat.

Remember
Foot-plates need to keep at least a 2” clearance from the ground to overcome thresholds

Remember
If the knees are too high the person may get a sore bottom from increased pressure. If the knees are too low the person may slide out of the chair

Removing & Replacing Footrests
Swing the footrest to the side by pushing the lever (1) Grasp the top bar of the footrest and lift up (2), releasing the footrests from the pins. Repeat on the other side. Holding the footrest in one hand, from the side align the pins with the holes in the footrest and attach (3). Swing footrest back in place.

Applying the Brakes
Push the brake handle forward to lock and pull back to release.

Remember
To apply the brakes before getting in or out of the chair

• The wheels and casters have maintenance free solid tyres installed that will not become flat if they are cut or punctured by debris on the ground.
• The chair is fitted with 8” diameter casters and 24” diameter rear wheels to make travel over rough terrain and small obstacles easier.
• On very rough or soft terrain it will be easier, and safer, for the care giver to pull the chair backwards until smoother or harder terrain is reached.

Removing and replacing the quick release wheels

Push and hold the center of the hub (as shown in the image) and pull the wheel from the frame. To replace the wheel, simply push the wheel securely back onto the frame.

SAFETY PRECAUTIONS

1. Consult your doctor, therapist, or other qualified professional to determine if this mobility device meets your specific needs.
2. Before using, make sure all parts are secure and the frame is fully opened
3. Ensure wheel locks are engaged before transferring to or from the wheelchair.
4. Use the supplied seat belt when being pushed by others.
5. DO NOT overload this wheelchair. The weight capacity is 300 pounds including the user and any things they may be carrying.

INSPECTION ITEMS

• » Ensure the chair rolls straight (no excessive drag or pull to one side).
• » Inspect the upholstery for tears and/or sagging.
• » Inspect hand grips for wear, looseness or damage.
• » Inspect for any loose or broken hardware or parts.
• » Inspect for cracked, broken or loose spokes.
• » Ensure the hand brakes DO NOT interfere with the tyres when rolling.
• » Ensure the hand brakes are easy to engage.

LIMITED WARRANTY

CareCo products carry a one year warranty against manufacturing defects, faulty materials and workmanship only. Any alterations, misuse, abuse, or accidental damage voids this warranty.
CareCo reserves the right to replace or repair any part that has become defective. The warranty does not extend to consequential costs resulting from the fault or defect of the product: freight and travel costs, loss of earnings, or other expenses that one may incur.

Warranty is valid for the original purchaser only and the original receipt must be presented before any warranty options are considered. Please also be prepared to provide the date of purchase and serial number.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>