CareCo BD03030003 Flexus Adjustable Bed Rail Instruction Manual
- October 30, 2023
- CareCo
Table of Contents
CareCo BD03030003 Flexus Adjustable Bed Rail
Product Information
The Flexus Adjustable Bed Rail is a safety device designed to help individuals with limited mobility to get in and out of bed safely. The bed rail is adjustable and can be installed on any size bed. It comes with three parts – part 10, part 11, and part 12. The bed rail is made of durable materials and can support a maximum load of 180kg.
Product Usage Instructions
-
Place part 10 into the marble and insert it into part 11.
-
Adjust the marble to the appropriate hole position.
-
Insert part 12 into part 7.
-
Bind the mattress with part 12 to complete assembly.
Note: Apply pressure using your hand to the area indicated by the arrow when stretching. -
When using the bed rail, ensure the seat belt is tied to the mattress and the bed board.
-
Ensure that the mattress is pressed against the support foot.
-
When the bolts on both sides are completely inserted into the hole, the armrest frame is fixed and can be used.
-
Do not exceed the maximum load of 180kg.
-
This product needs to be properly installed and used correctly. If it is installed incorrectly or used improperly it will cause damage to the product and risk personal injury.
SAFETY INSTRUCTIONS
- When using make sure that the seat belt is tied to the mattress and the bed board, and the mattress is pressed against the support foot.
- When the bolts on both sides are completely inserted into the hole, the armrest frame is fixed and can be used.
- The maximum load must not exceed 180kg.
- This product needs to be properly installed and used correctly. If it is installed incorrectly or used improperly it will cause damage to the product and risk personal injury.
PART NAME
ASSEMBLY
-
STEP1.
Insert part 7 into part 5. Feed part 4 through parts 3, 5 and 2. Hold part 1 by hand. Use the hex wrench to lock part 4. Assemble part 1 and part 6 as above.
-
STEP2.
Insert part 1 into part 8 and insert part 7 (seat belt) into part 9. Assemble part 8 according to the method of STEP 1. Lock all screws tightly.
-
STEP 3.
Press part 10 into the marble and insert into part 11. Adjust the marble to the appropriate hole position. Insert part 12 into part 7. Bind the mattress with part 12 to complete assembly.
1 Turing Court, Great Notley, Braintree, CM77 7AT, England
www.careco.co.uk