Ozito PXHVS-218 V 2 Speed Hand Vacuum Instruction Manual

: June 12, 2024
: ozito

Ozito PXHVS-218 V 2 Speed Hand Vacuum

Product Information

Product Name: Cordless Vacuum
Model: PXHVS-218

Standard Equipment

Brush Tool
Crevice Tool
Onboard Accessory Holder
2 X Extension Tubes
Wall Holder
Floor Tool

Specifications

Input: 18V
Air Flow: 17L/sec
Suction Power: 72 mbar (7.2kPa)
Dust Capacity: 600ml
Weight: 0.94kg
Warranty: 5-year replacement warranty
Battery and Charger: Compatible with all batteries and chargersfrom the Ozito PXC range

Product Usage Instructions

Battery Installation:

Ensure the on/off switch is in the “Off” position beforeattaching a battery.
To install the battery pack, slide it into the tool base untilit clicks into place.

Battery Removal:

To remove the battery pack, hold down the battery releasebutton and slide the battery out.

Assembly:

Ensure the tool is switched off and the battery is removedbefore performing any assembly tasks.
To attach accessories, align the accessory with the vacuumnozzle and push it into place.

Operation:

To switch on the vacuum, push the switch forwards into the EcoMode for longer runtime, suitable for hard floor applications.
To switch off the vacuum, pull the switch back.
Note: Accessories like the Brush Tool, Crevice Tool, ExtensionTubes, and Floor Tool can be attached to the nozzle following thesame procedure.

Using the Wall Holder:

Place the wall holder against the wall and use screws to fastenit.
Insert the Floor Tool and the Extension Tubes onto the wallholder for storage.
Do not put any body parts near the inlet opening of thevacuum.

WARRANTY

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO RETURNING YOUR PRODUCT FOR WARRANTY

PLEASE TELEPHONE OUR CUSTOMER SERVICE HELPLINE:

Australia 1800 069 486
New Zealand 0508 069 486

TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO

THE WARRANTY POLICY OR PROCEDURE.

WARNING
The following actions will result in the warranty being void.

If the tool has been operated on a supply voltage other than that specified on the tool.
If the tool shows signs of damage or defects caused by or resulting from abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.

The benefits provided under this warranty are in addition to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty, however, where you have suffered any additional direct loss as a result of a defective product you may be able to claim such expenses by contacting our customer service helpline above.

5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it will be replaced in accordance with the terms of this warranty. Lithium Ion batteries and chargers are covered by a 36 month warranty and are excluded from the warranty extension. Warranty excludes consumable parts.

KNOW YOUR PRODUCT

2 SPEED HAND VACUUM

1. Nozzle
2. Dust Container
3. Dust Container Release Button
4. On/Off Switch
5. Sure Grip Handle
6. Battery Seating

ACCESSORIES

7. Brush Tool
8. Cervice Tool
9. Floor Tool
10. 2 x Extension Tubes
11. Wall Holder
12. Onboard Accessory Holder

BATTERY & CHARGER
This tool is compatible with all batteries & chargers from the Ozito PXC range.

ONLINE MANUAL
Scan this QR Code with your mobile device to take you to the online manual.

SETUP & PREPARATION

FITTING THE BATTERY\

WARNING! ENSURE THE ON/OFF SWITCH IS IN THE OFF POSITION BEFORE ATTACHING A BATTERY TO THE TOOL.

Installing The Battery Pack

Slide the battery into the tool base until it clicks into place.

Removing The Battery Pack

Hold down the battery release button (a) and then slide the battery out.(b)

ASSEMBLY

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.

Attaching Accessories

Align the accessory with the vacuum nozzle and push into place.
To remove simply pull the accessory away from the vacuum nozzle.

Note: Accessories like the Brush Tool, Cervice Tool, Extension Tubes and the Floor Tool can be attached to the nozzle following the same procedure.

Using The Wall Holder

Place the wall holder against the wall and use the screws to fasten it on to the wall.
Insert the Floor Tool and the Extension Tubes on the wall holder to store them.
The vacuum can be hung on the wall holder.

CONTROLS

Switching On and Off

To start the vacuum push the switch forwards into the Eco Mode for longer runtime, ideal for hard floor applications.
Push the switch forwards again to start the Boost Mode for maximum suction power for carpet applications.

WARNING! DO NOT PUT PART OF YOUR BODY SUCH AS HANDS AND FINGERS NEAR THE INLET OPENING OF THE VACUUM.

USAGE

Vacuuming
The vacuum is ideal for dirt, saw dust and other debris.

Hold the vacuum firmly and switch the vacuum on to your prefered mode.
Move The vacuum slowly to allow the dust or debris to be lifted.

Note: Forcing the vacuum to move too fast over the dust and debris could clog the nozzle of the dust canister

WARNING! ENSURE THE VACUUM INLET IS NOT BLOCKED DURING USE

TROUBLESHOOTING

Problem	Cause	Remedy
Vacuum is not starting	Battery is low in charge	Charge battery
Battery not inserted properly	Insert battery pack correctly
Possible clogging	Clean the dust canister and filter cartridge.
Vacuum is not operating at full capacity	Possible clogging	Clean the dust

canister and filter cartridge.
Motor stops while vacuuming| Battery has no power| Charge battery

Short Battery Runtime

Ensure the battery is properly charged. It will take 4-5 charging cycles before the battery reaches optimum charge and run time.

MAINTENANCE

WARNING! BEFORE CLEANING OR CARRYING OUT ANY MAINTENANCE PROCEDURE, ENSURE THAT THE BATTERIES HAVE BEEN REMOVED.

Cleaning the Filter Cartridge
For best performance, empty the dust canister and clean the filter after each use.

Press and hold the dust canister release button.
Remove the dust canister by pulling the top of the container away from the vacuum housing.
Pull the filter cartridge out from the dust canister. Empty the debris into a bin and rinse the filter with cold water and allow to air dry.
Place the filter back into the dust canister, then refit the dust canister by first placing the lower edge onto the locating recess and then push the top in until it clicks into place.

Keep the ventilation slots of the tool clean at all times to ensure efficient operation.
After each use, blow air through the tool housing to ensure it is free from all dust, dirt, etc. Build up of dust or dirt particles may cause the tool to overheat and shorten the life of the tool.
If the housing of the tool requires cleaning, do not use solvents. Use of a cloth only is recommended.
Never allow any liquid to get inside the tool, never immerse any part of the tool into liquid.

Storage

When not in use, the tool should be stored in a dry, frost free location, keep out of children’s reach.
Note: Ozito Industries will not be responsible for any damage or injuries caused by repair of the tool by an unauthorised person or by mishandling.

WARNING! ENSURE THE TOOL IS SWITCHED OFF AND THE BATTERY IS REMOVED BEFORE PERFORMING ANY OF THE FOLLOWING TASKS.

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way. Please recycle where facilities exist. Check with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw materials. Reuse of recycled material decreases pollution in the environment. Please recycle packaging where facilities exist. Check with your local council authority for recycling advice.

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit www.ozito.com.au or contact Ozito Customer Service:

Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquiries@ozito.com.au

ELECTRICAL SAFETY

WARNING! When using electric tools basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury.

Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool. Save these instructions and other documents supplied with this tool for future reference.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
This appliance is compatible and only to be used with all batteries & chargers from the Ozito PXC range. Refer to the PXC battery and charger manuals for information regarding charging, use and storage.
WARNING! Always remove the battery from the tool:
- when the batteries are to be charged,
- whe the tool is left unattended,
- when the tool is being checked, cleaned, or having maintenance work done,
- when the tool is to be stored,
- or if the tool vibrates abnormally.
Do not combine different types of batteries or new and used batteries.
Do not use modified or damaged batteries.

GENERAL POWER TOOL SAFETY WARNINGS

WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric
Do not abuse the Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected Use of an RCD reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites
Remove any adjusting key or wrench before turning the power tool A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected
Dress Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

Do not force the power Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Battery tool use and care

Recharge only with the charger specified by the A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of
Do not expose a battery pack or tool to fire or excessive Exposure to fire or temperature above 130 °C may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Never service damaged battery Service of battery packs should only be performed by the manufacturer or authorized service providers.

VACUUM SAFETY WARNINGS

WARNING! When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well.

We cannot accept any liability for damage or accidents which arise due to a failure to follow these instructions and the safety information.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Do not aim the hose at other persons or
Never pick up asbestos or asbestos
Wood dust and shavings in a confined area can give rise to fire or an explosion.
Guard against possible ignition
Do not pick up any material that is burning or smouldering such as metal grinding dust, cigarette ends, matches etc.
Do not vacuum dry matter without the cartridge filter
Always switch the unit off before changing attachments, filters and emptying the tank.
Always check that the filter is clear and not Keep all openings clear of any blockages.
The equipment is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of